Performance Tool W5192 User manual

LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These
warranties give specific legal rights. Except where prohibited by local law, the law of the State of Washington
governs all warranties and all exclusions and limitations of warranties and remedies. There may be other rights
which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal
use and service. A defective product may be returned for a free replacement within 90 days from the date of
purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90
days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which
our examination shall disclose to be defective and under warranty. These warranties shall be valid only when a
sales receipt showing the date of purchase accompanies the defective product or defective part (s) being returned.
For part (s) after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be
replaced under normal use and service. These warranties shall not apply to any product or part which is used for a
purpose for which it is not designed, or which has been repaired or altered in any way so as to affect adversely its
performance or reliability, nor shall these warranties apply to any product or part which has been subject to
misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in
connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no
express or implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes
no implied warranty of merchantability and no implied warranty of fitness for any particular purpose, except that for
goods purchased primarily for personal, family or household use and not for commercial or business use,
PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied
warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in
all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any
manner related to any product, or to the design, use, or any inability to use the product. The sole and exclusive
remedy for a defective product or part shall be the repair, or replacement thereof as provided above. The laws on
limitation of remedies or on consequential, incidental or special damages may vary from state to state, so the above
limitations may not apply in all cases.
© Copyright 2018 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO
MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND
WILL VOID WARRANTY.
Some dust created by power sanding contains chemicals known to the State of California to cause cancer, birth defects or other reproductive
harm. An example of this type of chemical is lead from lead based paints. Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure: work in a well ventilated area and work with approved safety equipment, such as dusk masks
that are specially designed to filter out microscopic particles.
TOOL KART
OWNER’S MANUAL
Stock Number W5192

PARTS LIST
TOOLS REQUIRED
ASSEMBLY INSTRUCTIONS
• 10 mm socket or adjustable wrench
• 8 mm socket or adjustable wrench
• 10 mm nut driver, socket or
combination wrench
7
9
8
5
1
2
6
3
13
14
4
10
11
12
1. Assemble locking casters (#10) into
uprights (#2).
2. With the lower shelf ridges facing
outwards, assemble center panel (#3), onto
uprights (#2), making sure that the top of the
center panel (#3) is ush with top of uprights
(#2) with bolts (#10), nuts (#11) and washers
(#12), using washers on both ends of bolt.
Assemble bolts only nger tight.
3. Slide signs (#14) into slots on top shelf (#6).
Assemble end panels (#1) onto assembled
center section of kart with bolts (#9 and #8),
nuts (#11) and washers (#12), using washers
on both ends of bolt. The two holes on one
end of the end panel (#1) to top shelf (#6) and
the 3 holes on the opposite end of the end
panels (#1) correspond with the 3 holes in the
lower part of the uprights (#2) and use bolts
(#9). Assemble bolts only nger tight.
4. Tighten all nuts and bolts.
5. Install lower shelves (#4) onto assembled
kart.
6. *FOR TOOL KART ASSORTMENT*
Install shelves (#5) into following slots
(counting down from top slot)
Side 1: Side 2:
• Shelf 1 = Slot 8 • Shelf 1 = Slot 8
• Shelf 2 = Slot 12 • Shelf 2 = Slot 18
• Shelf 3 = Slot 18
No. Description Qty.
1 End Panels 2
2 Uprights 2
3 Center Panel 1
4 Bottom Shelf 2
No. Description Qty.
5 Shelves 7
6 Top Shelf 1
7 Top Sign Holder 1
8 6mm x 1.0 x 25mm Bolts 4
No. Description Qty.
9 6mm x 1.0 x 65mm Bolts 16
10 Locking Casters 1
11 6mm x 1 Nut 20
12 6mm Flat Washer 40
No. Description Qty.
13 Top Sign 2
14 Top Shelf Sign 2