Perkins Innovation PCDE-FDE1 User manual

PCDE-FDE1
Network Controller
Installation Manual
Select a device to edit or add new device here Add new device Enters MAC Address and Customer name
Conguration - cont’d
In the event that you can not connect to your PCD-FDE1,
please check the following:
1. Make sure power is connected and the power LED is
illuminated.
2. Check the Ethernet connection, make sure the RJ-45
connectors are rmly seated, and that the Ethernet
LED is illuminated / ashing.
3. Check the USB and serial connectors, make sure all
connections are tight, check to see that the USB LED is
ashing. If connecting to a CAV6.6, make sure the RS232
switch is set to rear.
Troubleshooting
LED diagnostic:
1Power - On - normal operation
2Connect - On - normal operation
Connect - Flashing - Boot up / Cong/ Upgrade
3Ethernet - On / Flashing - Normal operation
Ethernet - O - Problem with network connection
4USB - Flashing - Normal operation
USB - O - Problem with USB Adapter cable
Perkins Software LLC.
www.perkinsinnovation.com
123 4
©2014 Perkins Software LLC. All Rights Reserved.
All trademarks are the property of their respective owners.
Product Overview
Perkins Innovation PCD-FDE1 provides direct access and
remote control of a Russound multiroom audio system
from an Apple iPhone, iPod touch, iPad, or Android based
device. PCD-FDE1 allows for two-way remote control of
any zone in a Russound RNET® enabled multiroom audio
system and provides real time display of system and
source information. The unit also provides full integration
with the Russound DMS-3.1 Digital Media Streamer, and
MyRussound App™ supporting cover art with real time
meta-data display on older, non-RIO™ based Russound
controllers.
The PCD-FDE1 consists of an interface device for
integration between the local area network and the
Russound multiroom audio system. Control is performed
using the My Russound App™ which is available on Google
Play as well as the App Store. Conguration is done via
a cloud-based Web conguration tool, streamlining the
setup process.
Setup on the PCD-FDE1 is easily accomplished via cloud
based conguration utility. The conguration utility can
be accessed via Apple iPhone, iPod touch, iPad, or Android
based device. Any standard PC can also be used for this
process. This tool is available 24 hours per day and may
be accessed from any location. An Internet connection is
required.
After you add new device and click submit, you will be
taken to this screen to enter the device conguration, you
will enter the controller type and zone names
After scrolling down, you will now have to enter the source
names and source types. Click ‘Save Conguration
10.16.14

Features
•Compatible with the Apple iPhone, iPad, iPod Touch,
and Android based devices
• Allows the Russound DMS-3.1 Digital Media Streamer
and MyRussound App™ to be used with older Russound
controllers
• Supports Russound ACA-E5, CAV6.6, CAM6.6,
CAM6.6T, CAA66, and CA4 controllers
• Controls any zone and any source in the system
including RNETand IR-controlled sources
• Multi-controller support - up to 6 controllers and 48 zones
• Displays real-time metadata from Russound RNET sources
• Ability to control zones for Bass, Treble, Loudness,
Balance, DND, and Party Mode
• Zone volume control with mute option
• Displays zone and source names
• Easy to congure via PC or portable device – Set the
Russound controller type; set the zone names, source
names, and source types • 10/100 Ethernet connectivity
to home network
• Can be powered directly from the Russound DMS-3.1
• Firmware upgradeable via a cloud based browser interface
What’s in the box:
(1) 4’ CAT-5 network patch cable for connection
from the PCD-FDE1 to the existing LAN
(1) USB to RS232 serial adapter
(1) Quick start guide
(1) USB power supply cable
(2) Velcro mounting strips
Basic installation
What you will need:
• Home network Wi-Fi router (Note: A wireless access
point to the home network must be enabled in the setup
process for proper use by iPhone or iPod Touch devices)
• RNET enabled controller
• PC with browser capability
• iPhone or iPod Touch
Perform following steps:
1. Connect the PCD-FDE1 to your home network router
via a CAT-5 wired Ethernet (LAN) connection. The PCD-
FDE1 must
be on the same network as any Ethernet connections
to RNET controllers or components.
2. Connect the supplied USB serial adapter to the USB
port on the PCD-FDE1, to the RS232 port on the RNET
controller (on ACA-E5 multiroom controller, use RS-232
port ‘A’). If it is a multiple controller system, the
PCD-FDE1-A must be connected to controller #1.
Note: On CAV6.6 be sure the RS232 switch is set to‘rear
PCD-FDE1 USB Port
CAT-5 cable
Home Network
Router Power adapter or
USB to Aux USB cable
USB/Serial cable
Russound Controller
(CAV6.6 shown)
Conguration
Log on to the www.perkinsinnovation.com web site.
Click on ‘log in’ at the top of the page. See the screen
shot bellow. There is no network conguration for the
user to perform. Simply plug the device into the Ethernet
network, and it obtains an IP automatically via DHCP.
The device will automatically nd the DMS-3.1 and will
connect to that as well.
Set up the device using the online Web page and save
the conguration.
Login or Register Here
2. Press and hold the top button (marked“Connect”) until
the switch stops illuminating. (The switch has a built-in
LED) This may take up to 5 seconds. Once it turns o,
release the button.
Perform following steps:
1.In order to congure the PCD-FDE1, slide the switch
on the side to the middle position “Cong”.
3. The unit will then automatically download its
conguration and reboot. All LED’s will go out and
then ash on
briey. The switch on the top marked “Connect” will
begin to ash, indicating that it’s booting back up.
4. Once it’s booted and the USB LED begins to ash,
(indicating that the device is up and running) slide the
side switch back to run.
Conguration complete.