Perlegear PGSS6-1 User manual
Model:PGSS6-1
V1.0
Speaker Floor Stand
Instruction Manual
Thank you for choosing this Perlegear product! At Perlegear we
strive to provide you with the best quality products and services in
the industry. Should you have any issues, please don't hesitate to
contact us at [email protected](US/CA）
•Check package contents against Supplied Parts and Hardware List to assure that all
components were received undamaged. Do not use damaged or defective parts. lf you
•Not all parts and hardware included will be used.
•Carefully read all instructions before attempting installation. If you do not understand
the Instructions or have any concerns or questions, please contact customer service at
•This product may contain moving parts. Use with caution.
•Do not use this product for any purpose or in any configuration not explicitly
specified in this instruction. We hereby disclaims any liability for injury or damage
arising from incorrect assembly or incorrect use of this product.
SUPPLIED PARTS
SUPPLIED HARDWARE
1
Steel Washer
B
X 2
Base X 2
01
Thread Rod X 2
04A 04B
Plastic Cover X2
05
Thread Rod X 2
Connector X 2
06
Pole X 4
02 Top Plate X 2
03
Nut M8
C
X 2
Wrench
X 1
E
IMPORTANT SAFETY INSTRUCTIONS
A
X 8
Rubber Pad Rubber Foot
D
X 10
Step 1 Connect the poles [02] to the top plate [03]
04A
04B
03
03
02
06
02
2
01
Step 2 Attach the rubber feet to the base[01]
3
D
[D]
01
01
4
Step 3 Connect the base [01] to the post assembly
02
05
BASE
B
C
E
5
03
Step 4 Secure speaker to top plate [03]
A
Peel off the
back paper
A
Step 5 Manage cables
6
Thank you again for
choosing this Perlegear product!
All of us at Perlegear do appreciate your product purchase. We hope that you
are as happy with your product as we designing and manufacturing it for you.
We strive to provide you with the best quality products and services in the
industry. If you have any questions please don't hesitate to contact us at
[email protected](US/CA)
Table of contents
Other Perlegear Speakers manuals
