Perlesmith PSTVS01 User manual

2
Model:PSTVS01
Supplied Parts and Hardware
Hardware for Attaching TV Brackets to TV
(1)Base Plate-A1 (1)Junction Plate-A2 (1)TV Bracket1-A3
(1)TV Bracket1-B3
(1)TV Bracket2-A4
(1)TV Bracket2-B4(1)Base Plate-B1 (1)Junction Plate-B2
(8)M6x10 Bolt-C (4)M6 Nut2-E (1)Allen Key-F (1)Wrench-G
(4)M4x12 Bolt-H
(4)M8x20 Bolt-L
(4)M4x30 Bolt-I
(4)M8x35 Bolt-M (4)M4 Washer-N
(4)M8 Washer-P (4)M4 Washer-Q (8)M6/M8 Spacer -R
(4)M6 Washer-O
(4)M6x35 Bolt-K(4)M6x20 Bolt-J
• Please read through these instructions completely before attempting installation. If you do
not understand the instructions or have any concerns or questions, please contact customer
service at [email protected] (US）/[email protected] (CA).
• Check package contents against Supplied Parts and Hardware List to assure that all
components were received undamaged. Do not use damaged or defective parts. If you require
replacement parts, contact customer service at
[email protected] (US）/[email protected] (CA).
• Not all parts and hardware included will be used.
• Do not use this product for any purpose or in any configuration not explicitly specified in
this instruction. We hereby disclaim any liability for injury or damage arising from incorrect
assembly, incorrect mounting, or incorrect use of this product.
•Please check www.perlesmith.com for more products and company information.
IMPORTANT SAFETY INFORMATION
Table Top TV Stand
Instruction Manual V3.0
Thank you for choosing this Perlesmith product! At Perlesmith we
strive to provide you with the best quality products and services in
the industry. Please share your experience of our product with
others at www.perlesmith.com/pages/reviews if you are satisfied.
Should you have any issues, please don't hesitate to contact us.
Technical Support:
1-800-556-6806 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
[email protected] (US）
[email protected] (CA)
Website:
www.perlesmith.com

43
Step 1
Step 2
Step 3
Step 4
Connect the Base Plates to Junction Plates
Connect the TV Brackets
Secure the TV Brackets Assembly to Junction Plates
Secure the TV Brackets to the Back of TV
First of all, make sure the diameter and length of the bolts(H,l,J,K,L,M) your TV
requires. Once you have determined the correct diameter and length, you will thread
the bolts into the TV using the correct washers(N,O,P). Use the Spacers(Q,R) only if
the bolts are too long.
A2
A1
C
F
B1
B2
B4
E
B3
G
A4
A3
A3 B3
C
B2
F
A2
G