PET MARVEL Smart Pet Feeder User manual

*Please read this manual carefully before use and keep it in a safe place
SMART PET FEEDER[Mini]

❶Information For Users
Precautions ：
• Pleaseusethisdeviceindoor.DoNOTplaceitunderdirectsunlight.Please
keepawayfromfiresources.
• DoNOTputobjectsoritemsotherfrompetfoodintothebarrelincaseof
deviceerrorormistakenbypet.
• Pleasemakesurethepowercordisinplaceandwillnotbetrampled,tripped,
biteordamagedtoavoidelectricshockandotheremergencies.
• ThedevicebodyisNOTtobewashedorsoakedbywater.
• Thedeviceissuggestedtobeplacedatacorneroragainstawalltoavoid
tackledbypet.
• DoNOTdisassemble,modifyorrepairthisproductbyyourown,otherwiseall
warrantyandservicerightswillbewaived.
• Thisproductissuitablefordrypetfoodupto16mmindiameter.
• DoNOTputinwetfoodsoasnottocauseblockingoftheoutletchannelor
componentsdamages.
• Shapeanddensityofpetfoodmayeffecttheactualcapacityofthebarrel;
Theamountofgrainofeachservingmayvaryfromdifferentgraindensityalso.
• Ifthereisanytravelarrangement,pleaseinstalldrybatteriesintotheproduct
inadvanceincaseanypowerfailureathomehappenswhenyouareaway.

❷Packing List
Notes: After removing off the package, please make sure the product is in good
condition and check the accessories against the instruction manual.
Due to the product update iteration, accessories may have some adjust- ments
or changes. Real objects be taken as final.
Feeder body
1.5mUSB cable
Desiccant pack
ABS plastic
food bowl
Stainless steel
food bowl
Product
Manual

❸Product Information
Main control
button
Cover
Translucent
storage
bucket
Indicator
light
Food outlet
6 ° inclined
food bowl
Cover
Place desiccant
Translucent storage bucket
After the granary is installed into
the main body of the fuselage,
do not disassemble
Main control button
❶ Initial setting: long press the button for 5 seconds, after the beep, you can
switch to Bluetooth network configuration and App network configuration mode
❷ Restore factory settings: Press and hold the button for 10 seconds to unbind the
device and clear the information and settings in the device
Distribution network breathing light
Shortage of food (orange always on)
Grain blockage (red constant light)
production test (red flashing )
Low battery (red breathing)
Equipment upgrade in progress (blue
breathing)

❹Product Installation
Step 1: Battery installation
Put 4 AA batteries into the battery
compartment, As a backup power
source
*Please ensure there is no grain in the
barrel before installing the battery
Attention ： This is an emergency power
supply for power failure. If there is no such
requirement, you can skip this step
Step 2: Power cord installation
Press the USB cable flatly into the
bottom power cord slot
Step 4: Connect the power supply
Take out the body of the feeder and
insert the power cord into the adapter
socket at the bottom of the body to
ensure that it is firmly inserted
Step 3: Food bowl installation
Place the main body on a level
surface. Install the food bowl below
the grain outlet

❺Instructions
❶ Open the top cover
Open the cover and add pet food
❷ Add desiccant
Place desiccant evenly into the box
behind the top
❹ If manual feeding is needed
3 clicks on the Manual Button to out 1
serving of grain
(about 10g-15g)
❸ Add device
Download the App and follow the
instructions to add device. Then set
and manage feeding plans on App
Smart Life

❻Device networking
Smart Life APP
(1) PleasedownloadtheAppfirst. Search“SmartLife”inAppStoreor
GooglePlay.
(2) Downloaditandsignin.
Step 1: App download
Power on the device: open the battery cover at the bottom of the machine, insert one end of the
free USB cable into the USB hole at the bottom of the machine, and the other end into its own
adapter or the socket with USB interface, and then connect the device to the power supply.
Step 2: Device power on
❶ Bluetooth distribution mode
• Put the device on the power and let it stand without long pressing the button to ensure that the
indicator light is flashing slowly；
• Open the App and mobile phone Bluetooth, click the "+" sign in the upper right corner of the App
homepage to enter the device list, and enter the device that pops up at the bottom of the App to
add;
• Confirm that the device indicator is flashing slowly, and enter the Wi-Fi password as prompted by
the App to ensure that the phone is connected to a 2.4G Wi-Fi network;
• After the network configuration is successful, the iris will be steady white, indicating that the
device is connected to the network, and you can use the App to remotely control the device.
❷ App distribution network mode
• Put the device on the power and let it stand, press and hold the button for 5 seconds, release it
after a beep, and observe to confirm that the indicator light is blinking in a breathing mode
• Open the App, turn off the Bluetooth of the mobile phone, click the "+" sign in the upper right
corner of the App homepage to enter the device list, select the smart feeder and click to enter,
then click the network configuration mode in the upper right corner to switch to "hotspot network
configuration (compatible mode)";
• Confirm that the device indicator light flashes in a breathing mode, and enter the Wi-Fi password
as prompted by the App to ensure that the phone is connected to a 2.4G Wi-Fi network. After the
input is complete, enter the hotspot network configuration instruction page;
• Select the network starting with SmartLife- in the network configuration list to connect. After the
connection is successful, return to the App to enter the network configuration progress page;
• After the network configuration is successful, the iris will be steady white, indicating that the
device is connected to the network, and you can use the APP to remotely control the device.
At present, the device supports two network configuration modes: Bluetooth network configura-
tion and AP network configuration. You can choose one of the two. It is recommended that users
use Bluetooth configuration network first. If Bluetooth configuration fails, you can switch to AP
network configuration. Note that the network configuration The process needs to be completed
within 3 minutes, and the timeout needs to be triggered to enter the distribution network again.
Step 3: Equipment distribution network

❼Product Specifications
Product Name :SMART PET FEEDER[Mini]
Product number :DCA013
Overall size(mm) :315*180*330
Machine capacity :2.5L
Suggested pet types :cats, small dogs
Power supply :5V 1A
Communication method :
Wi-Fi connection (2.4GHz)
Communication distance :30m
This product contains a wireless transmitter module with the approval code of CMIIT ID：2020DP6462.
Step 4: Network distribution failure troubleshooting
❶ Router troubleshooting
• Please confirm whether the router password you entered is correct, and pay attention to the WiFi
account or whether there are spaces and case problems before and after the password;
• Please confirm that you are connected to a 2.4G band network. At present, the device does not
support 5G band network, that is, the default network name is WiFi network with the word - 5G
• Make sure that the encryption method in the wireless settings of the router is WPA2-PSK, the
authentication type is AES, or both are set to automatic. The wireless mode cannot be 11n only;
• If the router enables wireless MAC address filtering, you can try to remove the device from the
router's MAC filtering list to ensure that the router does not prohibit the device from connecting to
the Internet, or turn off MAC address filtering;
• Make sure that the router has enabled the DHCP service. If it is not enabled, the IP address will
be occupied.Among them, 3, 4, and 5 belong to the professional field and need to contact the router
manufacturer for adjustment.
❷ Other problems
Please troubleshoot the router first, and then scan the WeChat QR code at the end of the manual to
feedback the problem. Please provide the router brand and model when giving feedback.
❸ Color description of indicator light
Self check table of machine status (subject to the form of main control key on)
White breath:
Hot spot to be distributed
White flashing:
Bluetooth standby network
Off: The device has no power or battery mode, you need to remove the battery, only connect the USB cable,
and plug the USB cable again
Orange:Food shortage
The grain is lower than the height
detected by the optical eye in the cabin
Need to cut off the power and
re-energize, then take out the
turntable to clean up the grain
It's the Production Test Mode.
Please cut off the power and
re-power to restore
Red:Block food
White light is on:
Already equipped
Flashing red

Warranty Card
Dear customers, thank you for purchasing this product, please read the
following warranty terms carefully before using this product:
❶ The warranty period is one year, starts from the date of purchase (based on
valid purchase records). We provide free maintenance for any quality problem
within this duration.
❷ The following conditions are not covered by the warranty:
• Any malfunction or defect caused by improper conditions of use of
environment;
• Any fault or defect caused by Improper installation, misuse, unauthorized
maintenance, force majeure events, or other external reasons;
• Any fault or defect caused by use of non-original fittings or accessories;
• The product has exceeded the warranty period;
• Other failures or damages caused by none of product design, technology,
manufacturing process or quality problems;
• Normal fading, wear and tear or consumption during the use of the product;
• Not able to provide valid purchase certificate.
❸ Please contact Customer Service within a proper time to confirm warranty
service situation.
❹ If the returned product does not meet the valid warranty terms, we will
charge you for the corresponding maintenance costs.
❺ Please fill in the after-sale information feedback form and send it together
with the returned product.
After-Sales Feedback Form
Customer Name Product Model
Your Phone Number Date Of Purchase
Your E-Mail Where You Purchase
(Channel & Shop)
Your Address Fault Feedback
(Code & Name)
❽