PET M6-02 User manual

Instruction ManualM6-02Intelligent moduleThis module is configurated in smart version only.Standard Edition does not have this configurationWhen the moving object is close to the sensor, it runs automatically, and the delay closes automatically.Power inputDC5VConnect to water dispenserTime adjustment10 seconds - 5 minutesGeneral do not tuneinstallation diagramPeopleorpets·Avoid direct sunlight·Avoid water intake·Avoid wind blowingCleaning precautions-Be sure to do cleannig after disconnecting the power supply.Not suitable for outdoor use-For the first time, clean the water tank and accessoriesIt is normal that the filter element may have some powder. Soak it for 10minutes and rinse it before first use. It is recommended to replace it every4 weeks. -When the pet water dispenser is used for many pets, thefrequency of the filter element replacement should be higherPlease clean the water tank, filterelement and water pump regularly according to the water quality and petdrinking habits. Once a week is recommandedPlease clean the elbow with the cleaning brush come along, the water tanand other accessories could be cleaned with any cloth.Submersible pump cleaning methodDismantle and clean each component weekly as shown aboveUse your nails to enter the waterpanel and pull it outRegulating water flow+ Maximum, - Minimum+-Medium recommended 165

Product installation diagramSubmersible pumpDC5VKeep the water level at a certain height.Keep flooding the pump.Water1.Insert the submersible pump into the pipe under the cover2.Assemble all the parts3.Add water,Plug in the power
Product DescriptionFeatures·Simple structure，easy to clean·Large capacity，no worry on trip·Simulation faucet，pet loves·Ultra quiet pump,≤38db·Unique water floe direction,no floating hair·Intelligent module·Three-layer enhanced filtration·Storage bowl for power failure emergencyParametervoltage:DC 5vPump current:80mAPump head:0-35cmPump flow:120L/HCapacity:2.5LSize:215*175*125 mmUSB cable:1.5mMaterialWorking temperature:0-40℃·Stop automatically in case of water shortage·Module design,easy to install(Not standard configuration)(Not standard configuration)Weight:700-800gPacking list·*Watertank1· *Submersible pump&Hose1·*Filter1·*Lid1·*Inner cover1·*Induction module1(Smart version only)· *Product manual1Usage method3.Add water. Please always keep thewater higher than the submersible pump, otherwise the pump will be noisyor damaged.4.When the USB plug is plugged in, the water dispenser starts to work.2. Install all the components(refer to the Product installation diagram) 1. Take out the water tank and other accessories, For the first time. flush the water tank ,Filter and all accessories with running water, except for USB interfaces and adapters.234
óOUTlet pipe*1