PETOUCH Premium Pet Door User manual

Premium Pet Door
Installation Guide
Important Notice：
Components：
Screws
Screw Capes
12 Pieces
2 1/4” 14 Pieces
1 3/4” 14 Pieces
1/2” 14 Pieces
. Please read this guide before installation.
· Check for electrical/plumbing xtures that could be in the door where you wish to place the pet door.
· The installation process requires cutting on your door that is irreversible. Please ensure that the pet
door is the product you need before installation.
. For child safety, we do not recommend that the door be installed in any area where a child could have
accessed to an unfenced or unprotected swimming pool or pond.
· Pay attention to safety during installation process.
Cutting
Template
Inner Frame x1
Outer Frame x1
Cutting Template x1

Tools Needed：
Installation Steps：
· Drill
· Tape
· Level
· Pencil
· Scissor
· Screwdriver
· Tape Measure
· Reciprocating Saw
· 3/8'' (10mm) Drill Bit
Shoulder Height
Cut template along with the
Black Line.
Measure your pet's shoulder
height.
Install the inner and outer frames,
securing with provided screws
and caps.
Reminder: Beforeinstallingpetdoorframes
onahollowdoor,pleasellthe gap inside
the door with base&spacer.
Carefully cut the hole out using
a jigsaw or other appropriate
cutting device. Cut on line.
Drill a hole in each of the 4
inside corners with a minimum
of 10mm (3/8”) drill bit.
Stick the template according to
pet's shoulder height (make
sure the template is level), then
carefully trace the template
with a pencil.
1 2 3
45 6
Cutting
Template