Phanteks Eclipse P600s User manual

USER MANUAL V1.0
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

Thank you
for choosing
All manuals and user guides at all-guides.com

2
26
28
29
32
33
TABLE OF CONTENTS
Introduction
Specications
Exploded View
Accessories
Congure your P600S
Get Started
Installing the Motherboard
Installing the Power Supply
Installing Fans
Connecting the Fan Hub
Installing Drives
Installing Water Cooling
Radiator Installation
Pump/Reservoir Installation
Installing GPU Anti-Sag Bracket
Connecting Front I/O
Cable Management
Matienance
Optional Upgrades:
Installing A Vertical GPU
Installing A Dual System
Contact Us
Warranty
3
4
5
6
7
9
11
12
13
15
18
21
22
23
24
1. WHAT’S INSIDE?
2. CHOOSE YOUR SETUP
3. SUPPORT
All manuals and user guides at all-guides.com

3
INTRODUCTION
Welcome to Phanteks!
The P600S combines the best of 2 worlds with its high quality sound dampening panels and the ultra high
airow fabrics from Phanteks. Achieving both a quiet system and a high airow conguration.
The durable fabric, carefully selected by Phanteks, results in a much lower airow resistance compared to
standard mesh panels. Keeping air speed higher and noise levels lower.
Phanteks believes that meaningful designs are created through
the fusion of form and function.
The Phanteks team
All manuals and user guides at all-guides.com

4
Dimension
(WxHxD)
Form Factor
Materials
MB Support
Front I/O
Side Window
PCI slots
Internal 3.5”
Internal 2.5”
Front
Top
Rear
Front
Top
Rear
Premium Fan 140mm
Universal Fan Hub
3.5” Stackable HDD Bracket
Vertical GPU Mount
Accessory Bag
GPU Anti-Sag Bracket
Airow Cover
Toolbox
E-ATX Motherboard width
CPU Cooler Clearance
GPU Clearance
Front Radiatior Clearance
Top Radiator Clearance
Contact (International)
Contact (America)
Warranty
240 mm x 520 mm x 510 mm
(9.45 in x 20.5 in x 20.1 in)
Mid-Tower
Powder coated steel chassis
Sound Dampening Panels
Tempered glass side panel
E-ATX, ATX, Micro-ATX, Mini ITX
Power button, 2x USB 3.0,
Microphone, Headphone, Reset Button,
USB 3.1 GEN 2 Type-C
Yes, Tempered glass
7x
10x (4 included)
3x (3 included)
3x 3x (2 installed)
3x 2x
1x 1x (1 installed)
Up to 360 Up to 420
Up to 360 Up to 280
120 140
3x (installed)
1x (installed)
4x
1x
1x
1x
1x
1x
280mm (11.1 in)
190 mm (7.48 in)
435 mm (17.24 in)
95 mm (3.74 in)
65 mm (2.56 in)
[e-mail]
[e-mail]
5 Years*
CASE SPECIFICATIONS INCLUDED ACCESSORIES
CLEARANCE
SUPPORT
PCI SLOTS & DRIVE BAYS
FAN
RADIATOR
120 MM
120 MM
140 MM
140 MM
*see page 31
SPECIFICATIONS
All manuals and user guides at all-guides.com
all-guides.com

5
11
1
10
2
4
6
4
59
3
8
7
1. Chassis
2. Front Panel
3. Top Panel
4. Side Panels
5. Radiator Bracket
6. PSU Bracket
7. Front Silent Cover
8. Top Silent Cover
9. Airow Cover
10. Front Dust Filter
11. PSU Filter
EXPLOADED VIEW
All manuals and user guides at all-guides.com

6
ACCESSORY BAG AND TOOLBOX
ACCESSORIES
3.5” MODULAR HDD BRACKET
- 4 included in accessory box
- For 3.5”or 2.5”Drive
PREMIUM FAN 140 MM
- 3 Pre-installed
- Hight static pressure
- Silent operation
VERTICAL GPU MOUNT
- Included in accessory box
- Riser Cable is sold separately
AIRFLOW COVER
- Included in accessory box
- Magnetic
GPU Anti-Sag Bracket
6x Zip Tie 150mm
Phanteks Logo Badge
ToolboxAccessory bag
Fan screw
M3x5 mm
Motherboard /
SSD screw
6-32x6 mm
Hex screw
Motherboard
Stando + tool
6-32x6 mm
Thumb screw
6-32x5 mm
Case screw
6-32x9 mm
HDD screw
Riser Cable
screw
12x
22x
12x 6x 16x 3x7x
1x
1x
All manuals and user guides at all-guides.com

7
CONFIGURE YOUR P600S
STORAGE - P15.
DUAL SYSTEM - P27.
WATERCOOLING - P18.
AIR COOLING- P13.
The P600S has the most versatile chassis design, providing you with a myriad of
options. With so many possibilities to pick from, you can use this overview to choose
and plan the best conguration for your build.
All manuals and user guides at all-guides.com

8
CONFIGURE YOUR P600S
High performance fabric from Phanteks enhances
the cooling performance while lowering noise
levels.
Heavy and sound dampening panels reduce noise
levels and improve acoustics.
The P600S can be transformed from a Silent to a High Airow conguration. The magnetic front and top Silent Covers
can be easily removed or installed. By removing the Silent Covers the air intake and outtake surface area is increased
dramatically, allowing a much higher cooling capacity.
All manuals and user guides at all-guides.com

9
GET STARTED
PREPARATIONS
The P600S case is designed to support installation in a standing position.
Don’t turn on the power to your system until installation is complete.
Discharge your body’s static electric charge by touching a grounded surface
before performing any hardware procedure.
Make sure to consult the manuals of your hardware before installation.
If you do not feel comfortable with performing the installation
procedure, consult a qualified computer technician.
REMOVING TOP PANEL
4x
REMOVING FRONT PANEL
LOOSEN:
2.
1.
2
3
1
All manuals and user guides at all-guides.com
all-guides.com

10
GET STARTED
REMOVING SIDE PANEL
3.
1
2
Open the side panel more than 90 degrees and lift it up near the hinges.
All manuals and user guides at all-guides.com

11
INSTALLING MOTHERBOARD
Some motherboards require installation
or repositioning of the standoffs. Please
consult your motherboard manual for the
correct standoff positioning.
STANDOFF POSITIONING
Micro ATX (install extra standos)
ATX / E-ATX (Pre-installed)
REQUIRES:
For repositioning standos
By loosening the thumb screws you can slide
the Cable Covers left and right for optimal cable
management.
These standos have a special collar to keep the
motherboard in place when installing vertically.
Use the motherboard screws from the toolbox to install your motherboard on the
pre-installed standos.
All manuals and user guides at all-guides.com

12
INSTALLING POWER SUPPLY
1
2
4x
2x
LOOSEN:
REQUIRES:
The power supply can be installed by removing the PSU bracket on the rear of the
case chassis.
Connect all needed cables to the
power supply before installing it in the case.
All manuals and user guides at all-guides.com

13
INSTALLING FANS
REQUIRES:
TOP
140
FAN
120
FAN AIRFLOW COVER
140
FAN
120
FAN
FRONT
140
FAN
120
FAN
REAR
2x
LOOSEN:
BA
Congure your airow-path with this overview. All fan locations support both 120mm and
140mm fans.
Install the magnetic Airow Cover to prevent air from re-circulating when
you install 2x 120 mm or 2x 140 mm fans.
REQUIRES:
All manuals and user guides at all-guides.com

14
INSTALLING FANS
SATA
The White Connector will provide
the RPM signal to the
motherboard.
WHITE 3-/4-PIN
UNIVERSAL
BLACK 4-PIN PWM
BLACK 3-PIN DC
Choosing a PWM output provides the most
customization options in the motherboard
settings.
You can choose a PWM or DC output in the
motherboard settings. The Fan Hub will
automatically translate the signal to all connected
3- and 4-pin fans. Check WWW.PHANTEKS.COM/
FAQ for more technical details.
Expand the number of fans with splitter
cables up to a maximum of 4A total power.
Splitter cables are sold separately:
PH-CB-Y4P / Y3P
1.
2.
CONNECT THE FAN HUB 4PIN INPUT CABLE TO YOUR
MOTHERBOARD FAN HEADER
CONNECT EXTRA FANS TO THE CORRESPONDING CONNECTOR
ON THE UNIVERSAL FAN HUB
3. CONNECT THE SATA CABLE TO THE POWER SUPPLY
CONNECTING THE UNIVERSAL FAN HUB
TO PSU
FAN HUB INPUT
TO MOTHERBOARD
All manuals and user guides at all-guides.com
all-guides.com

15
INSTALLING DRIVES
2.5” SSD INSTALLATION
Install the SSD in to the SSD brackets before placing them in the chassis.
123
REQUIRES:
4x
Make sure to install the screws into the SSD
once it rests in the SSD bracket to secure its
position.
All manuals and user guides at all-guides.com

16
HDD
4x
REQUIRES:
3.5” HDD INSTALLATION
4x Phanteks Stackable 3.5” HDD Brackets are included.
Additional brackets are sold separately (PH-HDDKT_03).
The HDD bracket can also house
a 2.5”SSD instead of a 3.5”HDD.
Each HDD bracket can be stacked together to oer more exibility.
HDD INSTALLATION STACK / INSTALL REMOVE
1. LIFT UP LATCH
2. PULL OUT
2
2
1
1
AC
B
195mm PSU Clearance
250mm PSU Clearance
POSITION A+C POSITION B
INSTALLING DRIVES
BOTTOM COMPARTMENT
The Bottom Compartment can house up to 2 or 4 Stackable HDD trays. Using Position B will not limit
PSU or Front radiator clearance.
All manuals and user guides at all-guides.com

17
STACKSTACKSTACK
A
B
C
D
E
F
REQUIRES:
Up to 6 Stackable HDD Brackets can be installed in the main compartment.
1. REMOVE THE CABLE COVERS TO
REVEAL THE HDD MOUNTS
3.
2.
SECURE WITH 2 THUMBSCREWS
1x
REMOVE:
2x
MOUNT THE SINGLE / STACKED HDD
BRACKETS IN POSITION
Stack the HDD brackets before
mounting if you install more than
1x bracket.
MAIN COMPARTMENT
All manuals and user guides at all-guides.com

18
120 FORM FACTOR
120 FORM FACTOR
140 FORM FACTOR
120
140
240
280
360
420
FRONT
REAR
140 FORM FACTOR
120
140
REQUIRES:
TOP
120 FORM FACTOR 140 FORM FACTOR
120 140
240 280
360
21
Use the Airow Cover
to prevent hot air from
circulating.
INSTALLING WATER COOLING
All manuals and user guides at all-guides.com