Phiaton BT 330 NC User manual

BT 330 NC
OWNER'S GUIDE

2
1. SAFETY AND GENERAL INFORMATION
2. COMPONENTS & FEATURES
3. CHARGING
4. POWER ON/OFF AND HEADPHONE CONNECTION WAITING MODE
5. PAIRING WITH A ‘BLUETOOTH DEVICE’
6. MULTIPOINT CONNECTION
7. NOISE CANCELLING FEATURE
8. MONITOR FEATURE
9. LISTENING TO MUSIC (PLAY & CONTROL)
10. ACCEPTING / MAKING A CALL WHILE PLAYING MUSIC
11. USING THE CALL FUNCTION
12. CHANGING SOUND MODE
13. ShareMe™ FEATURE
14. MISCELLANEOUS FEATURES
15. CONNECTING AND USING THE AUDIO CABLE
16. SPECIFICATIONS
17. PRODUCT SYMPTOMS AND TROUBLESHOOTING
18. FCC COMPLIANCE INFORMATION
19. IC COMPLIANCE INFORMATION
20. CE COMPLIANCE INFORMATION
- Please follow the directions, and read the guidelines carefully before use.
Please keep the owner’s guide for future reference.
- Some functions of the BT 330 NC may not be available when it is paired
with certain devices.
- The speci󽗉cations are subject to change without prior notice for quality
improvement.
WIRELESS HEADPHONES with ACTIVE NOISE CANCELLING
Thank you for purchasing PHIATON BT 330 NC.
CONTENTS

3
1. SAFETY AND GENERAL INFORMATION
1) Use a standard USB charging cable (included), with or without a charging adaptor.
(5V, over 500mA) * Adapter Not Included
2) Lower the volume prior to listening to audio to prevent potential damage to eardrums caused by
sudden loud sound.
3) Listening to loud music for extended periods of time may cause hearing damage.
4) Do not store the device in places with a temperature higher than 113 ℉/ 45 ℃.
5) Keep the device dry. If the device becomes wet, turn the power o󽗈, dry the device with a dry towel and
contact Phiaton Customer Service for an inspection. (For more information, refer to the contact
us page within our website – phiaton.com)
6) Do not attempt to disassemble, modify or repair the device.
7) Do not cause shock to the device.
8) Keep out of the reach of children and pets.
9) Do not tug on cords or touch power plugs with wet hands.
10) Do not use the device nearby microwave ovens or wireless LAN adaptors.
11) When the product is not being used, set the device power switch to ‘OFF’.
12) When storing the device, place the device within the provided carrying case.
13) When cleaning the device, use a clean dry cloth to wipe the device clean. (Do not use solvents)
14) When storing the headphones, the ear pads may become damaged due to sweat, moisture and
makeup on the ear pads. Use a slightly wet towel or tissue and wipe the device before storing.
15) Replacement ear pads can be purchased from Phiaton Customer Service.
16) Use while driving or walking will prevent outside noise, such as signals or alarms, from being
heard and may be dangerous to yourself and others. Heed caution during use.
17) The radio waves of this device may a󽗈ect electronic medical devices. If you use an electronic
medical device, consult your doctor or medical device company before you use this device.
※ Use the BT 330 NC only for its intended purposes.
※ This device cannot be used for purposes related to human safety as it may cause radio interference during
operation.

4
2. COMPONENTS & FEATURES
1) COMPONENTS
- BT 330 NC
- USB Charging Cable
- Audio Cable (1.0 m, micro USB Plug to 3.5 mm Plug)
- Carrying Case
- Quick Guide
- Warranty Card
2) FEATURES
Ear Pad
Call Button
Bluetooth
Power Button
Jog Key
[Play Button /
(+)&(-) Sliding Switch]
LED Indicator
USB Port
Noise Cancelling
ON/OFF Switch

5
3. CHARGING
The device may not be charged upon purchase and must 󽗉rst be charged before use.
1) Connect the provided USB charging cable(micro USB 5pin connector) to BT 330 NC.
2) Connect the provided USB charging cable with a computer (laptop) or you may also use a separately purchased
USB adaptor (rating: 5V/over 500mA) to begin charging.
1) Power ON/OFF
- Press and hold the ‘POWER’ Button for 2 seconds to turn the power on.
- When turning the power o󽗈, press and hold the POWER Button for 2.5
seconds to turn o󽗈.
Operation LED Indicator
Charging Red light
Charging complete Blue light
Status Operation LED Indicator Voice Guidance
ON Press and hold the POWER
Button for 2 seconds After Purple light, Blue light blinks Power on
OFF Press and hold the POWER
Button for 2.5 seconds Red light blinks 5 times Power o󽗈
Status LED Indicator
Connection Waiting Mode Blue light blinks twice in 6 second intervals
4. POWER ON/OFF AND EARPHONE CONNECTION WAITING MODE
※ Pairing mode will start once the power is turned on for the 󽗉rst time after purchase.
※ When the BT 330 NC is not in use, ensure the NC function is switched OFF.
If left in the ON position, this will cause the battery to run out.
2) Connection Waiting Mode
- When power is turned on, ‘Connection Waiting Mode’ will start if ‘Pairing Mode’ cannot be entered or the headphones
cannot connect with ‘Bluetooth Device’.
- If the ‘Bluetooth Device’ is not connected within 5 minutes in ‘Connection Waiting Mode’, the headphones will
automatically turn o󽗈.
USB Charging
Cable
Power ON/OFF
ON: 2 Seconds
OFF: 2.5 Seconds
- This device has a built-in battery, so it will begin charging
automatically when you connect charging cable.

6
5. PAIRING WITH A ‘BLUETOOTH DEVICE’
1) Pairing
- Turn on the Bluetooth feature with the ‘Bluetooth Device’ you want to connect with the BT 330 NC.
- Place the BT 330 NC within 3 feet of the ‘Bluetooth Device’ you want to connect.
- Press and hold the CALL Button for over 2.5 seconds with the BT 330 NC power on to enter Pairing Mode.
Status LED Indicator Voice Guidance
Pairing Mode Blue and Red light alternately blinks Pairing Mode activated
Operation LED Indicator Voice Guidance
Connection success After Purple light blinks twice, Blue light
blinks once in 6 second intervals Device connected
- Within the ‘Bluetooth Device’ you want to connect, search/select ‘BT 330 NC’.
※ If the ‘Bluetooth Device’ requires a PIN CODE or password, enter ‘0000’.
- Use the headphones to play music or connect a call.
2) Re-connecting a Disconnected Device
① Auto Connection
- Once the device has been paired with a ‘Bluetooth Device’ it will automatically be connected to a previously
connected device once the BT 330 NC power is turned on.
- If Bluetooth becomes disconnected as the discover range between the ‘Bluetooth Device’ and the BT 330 NC
is exceeded, then Bluetooth will not be automatically re-connected.
When you are back within the discover range (33 feet), you must then connect manually.
② Manual Connection
- When having entered ‘Connection Waiting Mode’ during connection.
- Press the CALL Button or the PLAY Button on the headphone to connect.
- The BT 330 NC will also be connected if you select ‘BT 330 NC’ from the device search list within your
‘Bluetooth Device’.
3 feet
BT 330 NC
Press Call Button
for 2.5 Seconds

7
1) What is ‘Multipoint Connection’?
- This is a feature where BT 330 NC’s user can simultaneously connect two Bluetooth devices.
2) Multipoint Connecting
- Turn on the Bluetooth feature within the two ‘Bluetooth Devices’ you want to connect with BT 330 NC.
- Refer to 5. PAIRING WITH A ‘BLUETOOTH DEVICE’ to pair the 󽗉rst device with the BT 330 NC.
- Press and hold the CALL Button again for 2.5 seconds to enter ‘Pairing Mode’.
(Here, the 󽗉rst device becomes disconnected.)
- Once ‘Pairing Mode’ has been entered, pair the second device.
- Within the 󽗉rst ‘Bluetooth Device’ you want to connect, select ‘BT 330 NC’ again.
- Now, both of the ‘Bluetooth Devices’ will be connected simultaneously, and now the ‘BT 330 NC’ will control the
secondly paired device.
※ Sleep Mode will be entered when devices are not connected within two minutes. When trying to connect a device while in
Sleep Mode, pressing any button will re-enter ‘Connection Waiting Mode’ where connection is possible.
※ When the BT 330 NC power is turned o󽗈 and back on, only the second paired device will automatically be connected.
When the 󽗉rst paired device is reconnected, then both of the devices will remain connected.
3) Checkpoints Upon Pairing
- Check to see whether the Bluetooth feature is activated within the ‘Bluetooth Device’ you want to connect.
- When selecting the connection device, connect by selecting stereo headset device.
Music cannot be played when connected through mono headset.
※ In order to properly use the Bluetooth feature of this device, the pro󽗉le (A2DP, HSP, HFP and AVRCP) of the ‘Bluetooth
Device’ you are trying to connect must support the pro󽗉le of this device.
* A2DP–“Advanced Audio Distribution Pro󽗉le”, HSP–“Headset Pro󽗉le”, HFP–“Hands Free Pro󽗉le”.
AVRCP–“Audio/Video Remote Control Pro󽗉le”
※ The device will not operate properly if the pro󽗉les are not supported equally. Even when the pro󽗉les are supported equally,
some features may not properly operate depending on the ‘Bluetooth Device’ speci󽗉cations. To check the detail
speci󽗉cations of this headphone’s pro󽗉le, refer to ‘16.SPECIFICATIONS’. For more information, please visit phiaton.com or
contact Phiaton customer service.
6. MULTIPOINT CONNECTION
2
11
2
1
2

8
8. MONITOR FEATURE
1) The monitor feature allows you to mute your music and noise cancelling
so you can hear the surrounding sounds without removing the headphones.
2) Press the PLAY/PAUSE Button for about 1 second when you want to hear
the sounds around you when the Noise Cancelling feature is ON.
3) Monitor is continued for 30 seconds unless you press any key to stop the
monitor feature quicker.
3) What is ‘Auto Mode’?
This is a mode used to automatically reconnect both previously connected ‘Bluetooth Devices’ when the POWER
is turned o󽗈 and back on.
4) Using ‘Auto Mode’
- Within Pairing Mode, press the (+) Button for 2.5 seconds to turn on Auto Mode.
- If you press the (+) Button for 2.5 seconds again, then Auto Mode will turn o󽗈 and switch to Manual Mode.
※ Upon Multipoint Connection, the features operated within BT 330 NC usually operate within the second paired device.
(When using the 󽗉rst paired device, it is possible to operate the device from BT 330 NC.)
※ When using Multipoint Connection, the order of the paired devices may change. To change the order,
re-connect the device you usually use.
1) What is ‘Noise Cancelling’?
Noise Cancelling refers to a technology that reduces noise from mid/low
pitched sounds under 1kHz.
2) Turning Noise Cancelling Feature ON/OFF
- Pushing the NC Button towards ON direction will turn Noise Cancelling ON
and pushing the Button towards OFF will discontinue Noise Cancelling.
3) Cautions upon using Noise Cancelling Feature
- Noise Cancelling cannot be used when the battery is completely drained.
- Use while driving or walking will prevent outside noise, such as signals or
alarms, from being heard and may be dangerous to yourself and others.
Heed caution during use.
- Noise Cancelling is optimized for mechanical noises from airplanes, buses,
and subway trains and is not required for use within quiet interior
environments.
7. USING NOISE CANCELLING FEATURE
降噪功能降噪功能
降噪功能降噪功能
Noise Cancelling ‘ON’
Monitor ‘ON’
Press Play/Pause
Button for 1 Second

9
11. USING THE CALL FUNCTION
1) Accepting a Call
- When the incoming call tone is heard through the headphones, press the CALL Button. (Adjusting Call Volume:
to control the call volume, slide the switch to (+) / (-) direction)
2) Ending a Call
- While on a call, shortly pressing the CALL Button to end the call.
1) Playing Music
- Shortly press the PLAY Button once to play music from the ‘Bluetooth
Device’.
- While music is playing, shortly press the PLAY Button to pause the
playing music. The music will be played from the paused point when
playing music again
1) Accepting a Call while Playing Music
- When the incoming call tone is heard through the earphones, press the
CALL Button.
The music will be paused and the call is connected.
- Once the call has ended, press the CALL Button to terminate the call.
Once the call is terminated, the paused music will play again.
2) Making a Call while Playing Music
- While playing music, press and hold the CALL Button for about 1
second to pause the music and connect with the most recent number.
* This feature may slightly di󽗈er depending on your ‘Bluetooth Device’.
9. LISTENING TO MUSIC (PLAY & CONTROL)
Status LED Indicator
While music is playing
(Connection with aptX or AAC)
Purple Light slowly blinks
every 6 seconds
While music is playing
(Connection with SBC)
Blue Light slowly blinks
every 6 seconds
10. ACCEPTING / MAKING A CALL WHILE PLAYING MUSIC
* SBC(Sub Band Codec) is default audio codec installed for any ‘Bluetooth Device’.
* aptX and AAC are high quality audio codec.
: Brief Hold(1 Second)
: Press
: Press and Hold
Call Button
2) Controlling Volume and Using Seek
- Slide the switch to (+) / (-) direction to control the volume.
- Slide and hold the switch to (+) / (-) direction for about 1 second to go to the next / previous song. After 1
second, the ‘beep’ signal tone is provided.
- Slide and hold the switch to (+) / (-) direction continuously to fast-forward / rewind the current song.
* Music can be listened to through BT 330 NC by directly operating your ‘Bluetooth Device’.
* When the battery is completely drained, you can connect the provided audio cable to continue listening.

10
12. CHANGING SOUND MODE
1) When the BT 330 NC connects with the aptX or AAC high quality sound compatible ‘Bluetooth Device’, it
connects in aptX or AAC mode automatically. (If the ‘Bluetooth Device’ can not support aptX or AAC mode, it
will be connected with SBC mode.)
2) You can switch to SBC only mode which is less draining on the battery.
- Press the POWER Button and slide the switch to (+) direction simultaneously for 2 seconds when the device
power on.
3) Rejecting a Call
- When the incoming call tone is heard through the headphones, press and holds the CALL Button for about
1 second. (After hearing the ‘beep’ signal tone, the incoming call is rejected and the voice guidance “Call
Ignored” is heard.)
4) Turning Mute On/O󽗈
- While on a call, slide the switch to (-) direction for about 1 second to mute microphone. To turn back on,
slide the switch to (-) direction again for about 1 second.
5) Making a Call
- Press and hold the CALL Button for about 1 second. The ‘Redialing’ voice guidance is provided and a call is
connected with the most recent number.
※ This feature may slightly di󽗈er depending on your ‘Bluetooth Device’.
6) Call Waiting
- When there is another incoming call while on a call. (Supported only when having applied for this service with
your telecom provider.)
- Press and hold the CALL Button for about 1 second to place the current call on call waiting and connect the second
call. (Press the CALL Button again for about 1 second to switch between the waiting call and connected call.)
- Shortly press the CALL Button to end the current call and connect the second call.
7) Calling by Voice (Supported within mobile phones that support the voice command feature).
- While waiting, shortly press the CALL Button.
8) Switching between the Device and Mobile Phone
- To switch the call from mobile phone to the headphone, press the CALL Button for 1 second.
Status LED Indicator
Incoming Bell/Outgoing Bell Purple light blinks in 1.5 second intervals
During Call Blue light slowly blinks every 6 seconds
When there are two calls connected Purple light slowly blinks every 6 seconds
3 feet
‘Bluetooth Device’ supported
SBC and aptX or AAC
Automatic Sound Mode Selection (SBC, AAC or aptX) SBC only mode
Press POWER Button and
slide the switch to (+)
direction simultaneously
for 2 seconds