PHICOMM M1 User manual
Wireless Nano Router
M1
User Manual
User Manual / V1.0
2
Copyright Statement
PHICOMM is the registered trademark of Shanghai Feixun Communication Co., Ltd. Other
trademark or trade name mentioned herein are the trademark or registered trademark of the
company. Copyright of the whole product as integration, including its accessories and software,
belongs to Shanghai Feixun Communication Co., Ltd. Without the permission of Shanghai
Feixun Communication Co., Ltd., individual or party is not allowed to copy, plagiarize, imitate or
translate it into other languages.
All the photos and product specifications mentioned in this manual are for references only, as
the upgrading of software and hardware, there will be changes. And if there are changes,
PHICOMM is not responsible for informing in advance. If you want to know more information
about our products, please visit our website at www.phicomm.com.
i
Table of Contents
Wireless Nano Router
www.phicomm.com
CONTENTS
Chapter 1: Introduction
..............................................1
Product Overview...............................................................................................1
Main Features.......................................................................................................2
Chapter 2: Operating Mode Introduction
.........................1
Chapter 3: Installation
................................................3
Physical Connection ..........................................................................................3
Configure the Computer’s IP Address ........................................................3
Setup Wizard ..................................................................................................... 13
Chapter 4: Router Configuration
................................. 20
Basic Setting ...................................................................................................... 20
Operating Mode...................................................................................................................21
Internet Settings ..................................................................................................................21
Wireless Basic Settings.......................................................................................................22
Wireless Security Settings.................................................................................................25
Running Status .....................................................................................................................27
Expert Setting.................................................................................................... 27
Network Settings .................................................................................................................28
Wireless Settings..................................................................................................................29
DHCP Server...........................................................................................................................32
ii
Table of Contents
Wireless Nano Router
www.phicomm.com
NAT............................................................................................................................................33
Security Options...................................................................................................................36
Access Control ......................................................................................................................38
Routing Settings...................................................................................................................39
IP Bandwidth Control.........................................................................................................40
IP and MAC Binding............................................................................................................40
System Tools..........................................................................................................................41
Logout......................................................................................................................................45
Chapter 5: Specification
............................................ 46
Appendix A: Troubleshooting
..................................... 47
Appendix B: Certification
.......................................... 48
FCC Statement.................................................................................................. 48
CE Mark Warning ............................................................................................. 49
Appendix C: Glossary
................................................ 50
Wireless Nano Router
www.phicomm.com
1
Chapter 1: Introduction
Chapter 1: Introduction
Product Overview
Thank you for choosing M1 Wireless Nano Router.
The Wireless Nano Router is an all-in-one router, ideal for creating a highly ecient mobile oce
or entertainment network at any time. Small enough to t in the average pocket, the router is
uniquely suited to provide robust wireless networking to travelers, students, or anyone else for
work or play. It supports multiple operating modes such as AP, Router, Repeater, Bridge and
Client, helping you to extend wireless range and to boost the wireless signal. You can enjoy the
convenience of wireless network in home, oce, hotel or any other place with this compact and
portable router.
Front Panel
Description
SYS
The system is normalOn
Blinking There is a successful connection on the LAN/WAN port
LED Status
Wireless Nano Router
www.phicomm.com
2
Chapter 1: Introduction
Rear Panel
LAN/WAN: This Ethernet port can be used as a LAN or WAN port.
USB: Connect to your USB device.
Reset: Long press and hold the button for 8 seconds, the Router will reboot to its factory default
settings.
Main Features
•IEEE 802.11n, wireless speed up to 150Mbps
•Travel-sized design, lightweight, great for home or travel user
•USB port can be used for charging the Smart Phone
•Built-in rewall featured with IP, MAC , URL Filtering and ARP attack prevention to protect
your PC
•Supports multiple operation modes in dierent environment
•Supports WEP, WPA/WPA2-Enterprise,WPA /WPA2-Personal
•Backward compatible with 802.11b/g product
Wireless Nano Router
www.phicomm.com
1
Chapter 2: Operating Mode Introduction
Chapter 2: Operating Mode Introduction
This Wireless Nano Router supports five operation modes: AP (Access Point), Router, Repeater,
Bridge and Client. By default, the operation mode is AP.
In AP mode, it extends your existing hardwired network to your wireless clients.
In Router mode, you can connect it to your modem to access the internet.
Wireless Nano Router
www.phicomm.com
2
Chapter 2: Operating Mode Introduction
In Repeater mode, it can extend the coverage of your root wireless router, boost the wireless
signal strength.
In Bridge mode, it can wirelessly connect two or more remote LANs which also support Bridge
mode together.
In Client mode, it acts as a wireless network adapter.
3
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
Chapter 3: Installation
Physical Connection
Please refer to Chapter 2.
Configure the Computer’s IP Address
1) Click Start > Control Panel.
For Windows XP/2000
4
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
2) Select and double click Network Connections.
3) Right click Wireless Network Connection and then select Properties.
5
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
4) Select Internet Protocol (TCP/IP) and click Properties.
5) Select Use the following IP address and Use the following DNS Server addresses. The IP
address put in 192.168.0.X (like 192.168.0.100), Subnet mask put in 255.255.255.0, Default
gateway leave it blank. Then click OK, and then click OK again.
6
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
6) Right click on Wireless Network Connection again, choose View Available Wireless
Networks.
7) Click Refresh network list, search for PHICOMM_XXXXXX, highlight on it and then click
Connect button.
7
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
8) You can see a windows pop up requires for a Network key, you can find the network key from
the label attached on the Wireless Nano Router or the package box. Put in the network key
and then click Connect.
9) After you put in the correct network key, you can see it showing connected.
8
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
1) Click Start>Control Panel.
For Windows Vista/7
2) Click Network and Internet.
9
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
3) Click Network and Sharing Center.
4) Go to Change Adapter Settings (win7)/Manage Network Connections (Vista).
10
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
5) Right click Wireless Network Connection, choose Properties.
6) Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
11
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
7) Select Use the following IP address and Use the following DNS Server addresses, the IP
address put in 192.168.0.X (like 192.168.0.100), the Subnet mask put in 255.255.255.0, the
Default gateway leave it blank, then click OK, and then click OK again.
8) Right click on Wireless Network Connection again, choose Connect/Disconnect.
12
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
9) Click Refresh network list, search for PHICOMM_XXXXXX, highlight on it and then click
Connect button.
10) You can see a windows pop up requires for a Network security key, you can find the key from
the label attached on the Wireless Nano Router or the package box. Put in the network
security key and then click OK.
13
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
11) After you put in the correct network security key, you can see it showing connected.
Setup Wizard
After successful installation, you can go ahead to configure the router by log in the web
management page, please follow these instructions step by step:
1) Open your web browser, in the address bar, type in 192.168.0.1
14
Chapter 3: Installation
Wireless Nano Router
www.phicomm.com
2) You are prompt to enter the Username/Password (preset as admin/admin) which you can
found on the label attached to the router, click Login.
3) After successful login, you can see the web management page of the router comes up, please
go to Setup Wizard on the left side menu.
Note: If it is the first time you log in the web management page, only Wizard Setting option
comes up. However, if you have changed any settings, you can see there is one more option
Manually Setting, if you click on Manually Setting, you can quickly choose your operating
mode and then save it.
Table of contents
Other PHICOMM Wireless Router manuals
