Philips AVENT SCD580/00 User manual

SCD580
EN User manual 3
DA Brugervejledning 30
DE Benutzerhandbuch 58
EL  88
ES Manual del usuario 121
FI Käyttöopas 150
FR Mode d’emploi 177
IT Manuale utente 206
NL Gebruiksaanwijzing 235
NO Brukerhåndbok 264
PT Manual do utilizador 291
SV Användarhandbok 320
TR  
AR 398

2

8 Neck strap 25
9 Cleaning and maintenance 26
10 Storage 26
11 Ordering accessories 26
12 Guarantee and support 26
13 Frequently asked questions 27
1 Introduction
Congratulations on your purchase and welcome

support that Philips AVENT offers, register your
product at www.philips.com/welcome.
Philips AVENT is dedicated to producing
caring, reliable products that give parents the
reassurance they need.This Philips AVENT baby
monitor provides round-the-clock support
by ensuring you can always hear your baby
clearly without any distracting noise.The DECT
technology guarantees zero interference and a
crystal clear sound between the baby unit and the
parent unit.
The temperature sensor enables you to monitor
the temperature in your baby’s room, and offers
you personalised settings to help keep your baby’s
room comfortable.
This baby monitor has a baby unit with a
projector and a parent unit with a special soothing
screen that allows you control the soothing
options (nightlight, lullabies and projector) on the
baby unit from a distance.
Table of contents
1 Introduction 3
2 Overview 4
3 Preparing for use 4
3.1 Baby unit 4
3.2 Parent unit 6
4 Using the baby monitor 7
4.1 Positioning the baby monitor 7
4.2 Linking parent unit and baby unit 7
5 Functions and feedback on the
baby unit 9
5.1 Nightlight 9
5.2 Lullaby function 9
5.3 Projector 10
5.4 Paging the parent unit 10
5.5 Battery status light 11
6 Functions and feedback on the
parent unit 11
6.1 Soothing menu 11
6.2 Volume 14
6.3 Talk function 15
6.4 Night dim mode 15
6.5 Baby unit battery low alert 16
6.6 Battery status indications 16
6.7 Signal strength indicator 18
6.8 Reset 18
7 Menu of the parent unit 18
7.1 Navigating the menu 18
7.2 Sensitivity 19
7.3 Eco Max mode 20
7.4 Feed timer 21
7.5 Temperature 22
7.6 Humidity 23
7.7 Cry alert 24
7.8 Clock 24
7.9 Language 24
7.10 Key lock 25
ENGLISH
3

4
•III Baby unit
1 Projector
2 Nightlight
3 FIND button
4 Microphone
5 Projector on/off button
6 Next lullaby button
7 Lullaby play/stop button
8 Volume - button
9 Power-on light
10 On/off button
11 Battery status light
12 Nightlight on/off button
13 Volume + button
14 Humidity sensor
15 Temperature sensor
16 Loudspeaker
17 Socket for audio appliance
18 Socket for small plug of adapter
19 Compartment for non-rechargeable
batteries
20 Lid of compartment for non-rechargeable
batteries
21 Small plug of adapter
22 Adapter
23 Auxiliary cable
3 Preparing for use
IMPORTANT: Read the safety instructions
carefully before you use the baby monitor
and keep them for future reference.
3.1 Baby unit
Use the baby unit from the mains.To guarantee
automatic power backup in case of mains failure,
we advise you to insert non-rechargeable batteries.
2 Overview
•I Display
1 Signal strength indicator
2 Eco Max indicator
3 Night dim mode symbol
4 Cry alert indicator
5 Mute symbol
6 Battery status indicator
7 Humidity alert symbol
8 Navigation arrow
9 Temperature symbol
 
11 Microphone sensitivity indicator
12 Nightlight symbol
13 Lullaby symbol
14 Projector symbol
15 Timer or timer repeat symbol
•II Parent unit
1 On/off button
2 TALK button
3 Night dim button
4 - button to scroll backwards
5 Microphone
6 ’link’ light
7 Display
8 Sound level lights
9 MENU button
10 + button to scroll forwards
11 Battery status light
12 OK button
13 Soothing button
14 Handgrip/attachment hole for neck strap
15 Compartment for rechargeable batteries
16 Lid of compartment for rechargeable
batteries
17 Connection points for charging
18 Rechargeable batteries
19 Neck strap
20 Socket for small plug of adapter
21 Charger
22 Small plug of adapter
23 Adapter

5
2 Insert four non-rechargeable batteries.
DNote:
Make sure the + and - poles point in the right
direction.
3  
openings in the rim of the compartment for
non-rechargeable batteries.
4 Then push down the lid until the lock closes
with a click.
3.1.1 Mains operation
1 Put the adapter in a wall socket and insert the
small appliance plug into the baby unit.
3.1.2 Placing the non-rechargeable batteries
In case of mains failure the baby unit can run on
four 1.5V R6 AA alkaline batteries (not included).
Do not use rechargeable batteries.The baby
unit does not have a charging function and
rechargeable batteries discharge slowly when they
are not in use.
BWarning:
Unplug the baby unit and make sure your hands
and the unit are dry when you insert non-
rechargeable batteries.
DNote:
We advise you to use the baby unit on mains
power, as the baby unit has a limited operating
time when you use it on non-rechargeable alkaline
batteries.The operating time on non-rechargeable
batteries is 24 hours.
1 Push the lock to release the lid of the
compartment for non-rechargeable batteries
and remove the lid.
ENGLISH

6
3.2.2 Charging the parent unit
Charge the parent unit before you use it for the

the batteries are low.
Important:You have to charge the parent
unit for the full 10 hours to have a cordless
operating time of 18 hours.
1 Insert the small appliance plug of the adapter
in the socket on the back of the charger. Put
the adapter in a wall socket.
2 Put the parent unit in the charger.
•The display goes on and the battery status
indications show that the parent unit is
charging. For battery status indications,
see ‘Battery charge indications’ in chapter
‘Functions and feedback on the parent unit’.
3 Leave the parent unit in the plugged-in
charger until the rechargeable batteries
are fully charged.
DNote:
When you start using the baby monitor, it takes
four charge and discharge cycles before the
rechargeable batteries reach their full capacity.
3.2 Parent unit
The parent unit runs on two rechargeable
batteries that are supplied with the baby monitor.
3.2.1 Inserting the rechargeable batteries
1 Slide the lid of the compartment for the
rechargeable batteries off the parent unit.
2 Insert the rechargeable batteries.
DNote:
Make sure the + and - poles of the batteries
point in the right direction.
3 Slide the lid of the compartment for the
rechargeable batteries back onto the parent
unit. Push the lid home until it locks into place
with a click.

7
4.2 Linking parent unit and
baby unit
1 Press and hold the on/off button 3on the
baby unit for 2 seconds.
•The nightlight, the battery status light and

2 Press and hold the on/off button 3on the
parent unit for 2 seconds.
•
indicators and symbols.Then the indicators
and symbols fade out and the battery status
indicator appears.
4 Using the baby
monitor
4.1 Positioning the baby
monitor
BWarning:
Keep the baby unit out of the reach of the baby.
Never place the baby unit inside the baby’s bed
or playpen.
1 Because the cord of the baby unit presents a
potential strangulation hazard, make sure that
the baby unit and its cord are at least
1 metre/3.5 feet away from your baby.
2 To prevent a high-pitched sound from one
or both units, make sure the parent unit is at
least 1 metre/3.5 feet away from the baby
unit.
ENGLISH

8
What to do if no link is established
•The parent unit may be out of range
of the baby unit. Place the parent unit
closer to the baby unit, but not closer
than 1 metre/3.5 feet.
•The baby unit or the parent unit may
lose connection because it is too
close to another DECT appliance
(e.g. a cordless phone). Switch off this
DECT appliance or place the unit
further away from this appliance.
•The baby unit may be switched off.
Switch on the baby unit.
4.2.1 Operating range
•In both standard operating mode with Smart
Eco and in Eco Max mode, the operating
range is 330 metres/1000 feet outdoors and
up to 50 metres/150 feet indoors.
•The operating range of the baby monitor
varies depending on the surroundings and
factors that cause interference.Wet and moist
materials cause so much interference that
the range loss is up to 100%. For interference
from dry materials, see table below
DNote:
When you switch on the parent unit for

select your preferred display language (see
‘Language’ in chapter ‘Menu of the parent
unit’).
•The ‘link’ light on the parent unit starts


•When the parent unit and baby unit are
linked, the ‘link’ light turns solid green.The
signal strength indicator and the message

•



30 seconds, the parent unit starts to beep


9
5.2 Lullaby function
1 Press the lullaby play/stop button Kon the
baby unit to play the last selected lullaby.
•The selected lullaby repeats for the set time.
•
is played.
2 Press the next lullaby button to select
another lullaby from the list.
•If no lullaby is playing, the last selected
lullaby starts playing when you press the
next lullaby button .
•When you press the next lullaby button
while a lullaby is playing, the next
lullaby starts playing.
3 To adjust the sound level of the lullaby, press
the volume + or the volume – button on the
baby unit.
Dry materials Material
thickness
Loss of
range
Wood, plaster, cardboard,
glass (without metal,
wires or lead)
< 30cm
(12in)
0-10%
Brick, plywood < 30cm
(12in)
5-35%
Reinforced concrete < 30cm
(12in)
30-100%
Metal grilles or bars < 1cm
(0.4in)
90-100%
Metal or aluminium
sheets
< 1cm
(0.4in)
100%
5 Functions and
feedback on the
baby unit
5.1 Nightlight
The nightlight produces a soft glow that comforts
your baby.
1 Press the nightlight on/off button on the baby
unit to switch on the nightlight.
•Qappears on the display of the parent unit.
2 Press the nightlight on/off button again to
switch off the nightlight.
•The nightlight dims gradually before it goes
out completely.
•Qdisappears from the display of the parent
unit.
ENGLISH

10
•There are six different patterns and
each pattern is projected for 10 seconds.
When all six patterns have been shown,
the projector starts with pattern 1 again.
The patterns are repeated for the set time
(see ‘Projector’ in chapter ‘Functions and
feedback on the parent unit’).
2 To switch off the projector before the set
time has elapsed, press the projector on/off
button again.
•The pattern projected fades out and the
projector switches off.
•The projector symbol disappears from the
display.
5.4 Paging the parent unit
If you have lost the parent unit, you can use the
FIND button on the baby unit to locate the
parent unit.
DNote:
The paging function only works when the parent
unit is switched on.
1 Press the FIND button on the baby unit.
DNote:
You can only set the loudspeaker volume on the
baby unit when a lullaby is playing. If you have
set the volume for the lullaby higher on the baby
unit, the sound will also be louder when you use
the talk function on the parent unit.
4 To stop lullaby playing before the set time has
elapsed, press the lullaby play/stop button K
on the baby unit.
5.3 Projector
You can soothe your baby with coloured light
patterns projected on the ceiling by switching on
the projector.
1 Press the projector on/off button to switch
on the projector.
•The projector symbol appears on the display
of the parent unit.
•

for 8 seconds and then fades out for 2
seconds while the next pattern fades in.