
1-4
SERVICE AIDS
@ wARNTNG
All lCs and many other semi-conductors are
susceptible to electrostatic discharges (ESD).
Careless handling during repair can reduce life
drastically.
When repairing, make sure that you are
connected with the same potential as the mass
of the set via a wrist wrap with resistance.
Keep components and tools also at this
potential.
Safety regulations require that the set be restored to its original
condition and that parts which are identical with those specified,
be used
Safety components are marked by the symbol^A,.
Route the wire trees correctly and fix them with the
mounted cable clamps.
Check the insulation of the AC Power lead for external
damage.
Check the strain relief of the AC Power cord for proper
function.
Check the electrical DC resistance between the AC Power
Plug and the secondary side (only for sets which have a AC
Power isolated power supply):
CLASS 1
LASER PRODUCT
1 . Unplug the AC Power cord and connect a wire
between the two pins of the AC Power plug.
2. Set the AC Power switch to the "on" position (keep the
AC Power cord unplugged!).
3. Measure the resistance value between the pins of the
AC Power plug and the metal shielding ol the tuner or
the aerial connection on the set. The reading should be
larger than 4.5 Mohm (For U.S. it should be between
4.2 Mohm and 12 Mohm).
4. Switch "off" the set, and remove the wire between the
two pins of the AC Power plug.
o Check the cabinet for defects, to avoid touching of any
inner parts by the customer.
ESD
)
IAr
INFORMATION ABOUT LEAD.FREE SOLDERING
Philips CE is producing lead-free sets from 1.1.2005 onwards.
IDENTIF!CATION:
Regardless of special logo (not always indicated) one must treat all sets from F-JEiZdIElonrards, according next rules:
. On our website you find more information to:
* BGA-de-/soldering (+ baking instructions)
+ Heating-profiles of BGAs and other lCs used in Philips-sets
* Lead free
You will find ihis and more technical information within the "magazine", chapter "workshop news".
For additional questions please contact your local repair-helpdesk.
SERVIGE INSTRUCTION
Salety regulations require that after a repair, the set must be returned in its original condition. Pay in particular attention to
the following points: