Philips CTX332BLK/00 User manual

1
Your Phone
Philips continuously strives to improve its products. Due to software
upgrading, some contents in this user guide may be different from your
product.Philips reserves the rights to revise this user guide or withdraw it
at any time without prior notice. Please take your product as standard.
TFT LCD
Pick-up key
Side volume key
Micro USB port Headphone jack
Hang up key,
Power on/off key
Navigation and
confirm key
Left soft key Right soft key
Lock/unlock key

2
Home screen
Your phone’s home screen consists of the following areas:
Keys
Learn about the main keys.
Key Definition Function
(
Dial Make or answer a call.
,Confirm Select or confirm an option.
)Hang-up/
Power/Exit
End a call;
Return to home screen;
Hold to turn on/turn off the phone.
LLeft soft key Select the options on the screen.
RRight soft key Select the options on the screen.
*Lock/Unlock Long press *to lock keys on the home
screen;
Press left soft key Rand then *to unlock
keys.
Status Bar
Shortcuts

3
Icons & symbols
Learn about the icons and symbols on the screen.
Icons Definition Function
Silent Your phone will not ring when receiving
a call.
Vibration only Your phone will vibrate when receiving a
call.
Battery The bars indicate the battery level.
SMS You have a new message.
MMS You have a new multimedia message.
Missed call You have missed a call.
Call diverts All your incoming voice calls are being
forwarded to a number.
Bluetooth Bluetooth is activated.
Headset The headset is plugged into the phone.
Alarm The alarm clock is activated.
Roaming Displayed when your phone is registered
to a network other than your own
(especially when you’re abroad).
Home zone A zone designated by your network
operator. Contact your service provider
for details.
Blacklist Indicates that blacklist feature is
activated.
Key lock The keypad has been locked.
Memory card The memory card is in use.

4
Getting started
Insert SIM card and Charge the battery
Learn about installing SIM card and charging the battery for the first use.
Insert SIM card
1 Remove the back cover.
2 Take out the battery.
3 Insert the SIM card 1/2.
4 Install the battery.
5 Replace the back cover.

5
Charge the battery
A new battery is partially charged. The battery icon in the upper-right
corner shows the battery level of charging status.
Insert a Micro SD card (Memory card)
Tips:
• You can use the phone while it is charging.
• Keeping the charger plugged to the mobile
phone when the battery is fully charged will
not damage the battery. The only way to
turn off the charger is to unplug it, so it is
advisable to use an easily accessible power
socket.
• If you do not intend to use your phone for
several days, we recommend that you
remove the battery.
• If a fully charged battery left unused, it will
lost its charge over time.
• If a battery is being used for the first time or
the battery has not been used for a
prolonged period, it may take longer time to
recharge.
You can expand the memory of your
phone by adding a micro-SD card.
1 Align your micro-SD card with the
slot. Put it in place.
2 To remove the micro-SD card,
press the card to release it.

6
Customize your phone
Customize your phone to match your preferences.
Set time & date
1 On the home screen, go to Menu>Settings>Time and date.
2 Select Set time/date: Select the desired digits.
SIM settings
1 Check that your phone is turned on. Enter the PIN code if required.
2 Go to Settings>General>SIM settings>Dual SIM setting>Slot1/
Slot2 Name or Icon, name/set icon for your SIM card.
3 Go to Settings>SIM settings>Primary SIM to select SIM1/2 as
primary card.
Note:
• The PIN code is preconfigured and communicated to you by your network operator or
retailer.
• If you enter an incorrect PIN code three times in succession, your SIM card will be
blocked. To unblock it, you must request the PUK code from your operator.
• If you enter an incorrect PUK code ten times in succession, the SIM card will be locked
permanently. When this happens, please contact your network operator or retailer.
Profiles
The profiles are defined for several scenes. They consist of the settings
for ringtones, volume, and others. With preset profiles, you can easily
adjust the settings for incoming calls and messages as desired.
1 Go to Profiles, press ,to activate the profile.
2 Press left soft key Lto modify ringtone, volume and others.
To activate Meeting mode, long press #on the home screen.
Note:
• If you select Flight mode, you disable the connection between your phone and your
mobile phone network.

7
Using your phone
Use basic call functions
Learn to make or answer a call and use basic call functions.
Make a call
1 Enter the phone number.
2 Press ( to dial the number.
3 Press ) to hang up.
Tips:
• For international calls, long press 0 to enter the "+" sign for the international prefix.
• You can press LOption>Hold single call to hold first call, then press
LOption>New call to start the second call.
Answer and end a call
1 Press ( to answer the call (Press the side volume key to adjust the
volume).
2 Press right soft key Lto select hands free mode during a call.
3 Press )to hang up.
Tips:
• You can use the supplied headset to answer or end a call.
Use speed dial
On the home screen, you can call a number by long tapping a numeric
icon.
To assign a contact to a speed-dial key:
1 Select Settings>General>Speed dial.
2 Press ,to activate the status.
3 Select Set numbers to choose a numeric key.
4 Press ,to add a number.
Receive and send messages
You can use the Messaging menu to send text message, multimedia
message.

8
Send a SMS message
1 Select Menu>Messaging>Create message.
2 Write your text message.
3 Press ,to send the message.
Send a MMS message
1 Select Menu>Messaging>Create Message.
2 Edit contents, and press L\Options to add multimedia contents
(picture, audio, attachment or bookmark text).
3 Press ,to add a contact.
4 Press ,to send the Multimedia message.
Note:
• Copyright protected pictures and sound cannot be sent by MMS.
Send an E-mail
1 Go to Menu>Messaging>E-mail>Start to create account.
2 After setting up a new account, press ,to enter it.
3 Press LOptions>New email, enter the address (To ), subject and
content, press LOptions to add attachment/select the priority.
4 Press LOptions to send the E-mail.
Note:
• Consult your mail service provider for the mail server configuration.
Receive E-mails
You can check received E-mails in the inbox.
To receive E-mails automatically:
1 Choose to enter an E-mail account, press L
Options>Settings>Advanced settings>Account settings.
2 Go to Account settings>Check interval to set the time span,
then your mail box will be checked automatically after each time
span.

9
Enter text
Your mobile phone supports a number of text entry methods, including
T9 input, English input, numeric input and symbol input.
Virtual keypad:
Note:
• Depending on the language you select for your phone, the supported input methods
may vary.
Introduction of input methods:
Keys/Virtual
keypad
Function
#Short press to select input method.
#Long press to select input language.
*Enter symbols and punctuations.
*Long press to switch T9 English input on or off.
0Insert a space.
R(Right soft key)Delete the previous symbol.
,Select or confirm symbol.
Input method Function
English input Press the keys that are marked with the letter
you wish to enter. Press once to get the first
letter on the key, press twice quickly to get the
second letter and so on until the letter you
want is displayed on the screen.

10
Manage your phonebook
Add a new contact
1 Go to Contacts.
2 Press LOptions >Add contact to add a new contact.
Tips:
• For contacts on the smart phonebook, you can add detailed information, like home
number, office number, contact pictures and ringtones.
Search for a contact
1 Go to Contacts.
2 Press navigation key < or > to select a desired phonebook.
3 Enter the first few letters of the name in the search bar. (For
example “John Henry” enter JH)
4 Select the contact from the list.
Set group:
You can group your contacts as different groups, For different groups,
you can use different ringtones for identification, and send messages to
a group.
Add contacts to a group:
- Go to Contacts, press navigation key < or > to select Group,
select New group and edit the details.
- In Group, press ,to add members for the group.
My vCard
You can send your contact information by My vCard.
T9®predictive text
input
You need to press only once on the key
corresponding to each letter needed to spell a
word: keystrokes input are analyzed and the
word suggested by T9®is displayed at the pop-
up window.
Numeric input Press the numeric key to enter a number.