Philips Xenium 929 User manual

Memory jogger card
To ma ke a c al l: enter the number on the keypad, then press
or press the Pilot Key and select the Call option.
To answer a call: press or press the Pilot Key and select
the Accept call option.
To e n d a c all : press or press the Pilot Key and select the
End call option.
To use the Names list: press the Pilot Key from the idle
screen and select the NAMES icon.
You can scroll through the list of recorded names. To dial, select a
name and press .
In idle screen, move the Pilot Key down once to reach the Names
list.
Memory jogger card
To enter a name: select <NEW> from the Names list.
To access the carousel:simply press the Pilot Key. To select
a function, move the Pilot Key upwards or downwards. Then
confirm by pressing it. This gives access to the sub menu of the
selected function. Continue in the same way (select by moving the
Pilot Key, confirm by pressing it) until you reach the function you
desire.
To return to the previous menu: press and hold the
Pilot Key. You can also return to the previous display by pressing
the key.
To return to the idle screen: press and hold 1
Organiser
Messages Send SMS
Mailbox no
Read SMS
Settings
Accessories
Security
Network
Main
Menu
PHILIPS
* Depending on the subscriber’s card.
Broadcast SMS
Display
Time and Date
Language
Menu type
Hotkeys
Call settings
Names
Call list
Extras
Quick settings
Events Week view
Day view
Month view
OK
OK
OK
Sounds
SMS settings
Operator Services*
Voice keys

4
Overview of menus
Names
Messages
Send SMS
Read SMS
SMS settings
SMS centre
Signature
Validity period
Reply path
Delivery report
Auto save SMS
Broadcast SMS
Mailbox No
Call list
Organiser
Events
Day view
Week view
Month view
Extras
Call counters
Last call information
Info at call end
Accumulated call timers
Accumulated cost
-> Euros
<- Euros
Voice memo
Alarm clock
Calculator
Brick Game
Settings
Sounds
Ringer volume
Ringer
Key tones
Minute beep
Organiser alerts
Battery low alert
New SMS tone
Vibrator
Display
Zoom on/off
Backlight
Animation
Contrast
Security
Keypad lock
Public names
Call barring
Change codes
PIN protection
Time and date
Clock display
Set date
Set time
Language
Menu type
Simple menu
Advanced menu
Accessories
Car melodies
Speakers
Car kit command
Auto switch off
Auto answer
Voice keys
Hotkeys
Network
Register again
Preferred list
Call settings
Call forward
Autoredial
Any key answer
Call waiting
Caller ID
Quick settings
Normal
Silent
Autonomy
Headset
Car
Outdoors
Meeting

Table of contents
1
Table of contents
Table of contents 1
Before first use 3
Your very first call 3
Using the carousel 5
Example 5
To adjust the contrast 5
Activate/deactivate 6
Using the Names and other lists 6
Glossary 7
Your phone 8
Description of the phone 8
Screen 10
Initial start up
procedure 11
The micro-SIM card 11
Inserting your subscriber card (micro
SIM card) 11
Your PIN code and PUK code 11
Your PIN2 code and PUK2 code 11
The battery 12
Clipping on the battery 12
Removing the battery 12
Charging the battery 13
Making an emergency call 14
Using your phone 15
Switching on 15
Idle screen 15
How to enter a text or a number 15
Events in idle screen 16
Making a call 16
Answering and ending a call 16
Redial and reply 17
Voice dial 18
Flash dial 18
During a call… 18
Adjusting the earpiece volume 19
Mute the microphone 19
Unmute the microphone 19
Writing in the notepad 19
Consulting the Names list 20
Locking the keypad 20
Unlocking the keypad 20
Activate/deactivate the silent mode 21
Activate/deactivate the vibrator 21
Reading your GSM phone number 21
Using the menus 22
Overview of menus 22
Names 24
<New> 24
Select a name 24
Emergency 25
Own number 25
Messages 25
Send SMS 25
Read SMS 27
SMS settings 27
Broadcast SMS 28
Mailbox No 28
Call list 29
Organiser 29
Events 29
Day view, Week view and
Month view 30
Extras 31
Call counters 31
-> Euros 32

Table of contents 2
<- Euros 32
Voice memo 32
Alarm clock 32
Calculator 32
Brick Game 33
Settings 34
Sounds 34
Display 36
Security 37
Time and date 39
Language 39
Menu type 39
Accessories 40
Voice keys 40
Hotkeys 41
Network 42
Call settings 42
Quick settings 45
Use of network
services 46
Additional GSM network services
(GSM strings) 46
Query a voice server, a voice mailbox,
a messaging service, etc.
(DTMF tones) 46
Making a second call 47
Answering a second call 48
Answering a third call 48
Explicit Call Transfer 48
Conference Call 49
In-call symbols 49
Precautions 50
Radio wave safety 50
Your phone and its environment 50
Efficient use of your phone 50
Battery safety 51
Safety and security 51
Responsibility 51
Respect of local laws and regulations 51
Use while driving 52
Maintenance 53
Looking after your phone 53
Efficient use of your phone 53
Troubleshooting 54
Philips Authentic
Accessories 56
Index 60

Before first use
3
Before first use
Your very first call
Turn the phone face down
LNOTE:
A new battery is not completely charged.
1 Insert the micro-SIM card.
2 Insert the battery
For optimum performance follow the instructions on page 12. Place the battery on the
back of the phone (battery connectors downward, the top near the arrow inside the
case). Then push the battery into place in the direction of the antenna.
Remove the micro-SIM card from the Sim card.
Push the metal retaining clip to the right
and lift the cardholder. Slide in the SIM
cardbetween the retaining clip and the
plastic tongue with the cut corner of
the card as shown on the drawing.
Close the cardholder and push the
retaining clip to the left.

Before first use 4
Turn the phone face up
LNOTES:
1. You can hold a conversation even with the flip closed.
2. If the flip is in the closed position during a call, you can open it without affecting the call in progress.
3 To switch on the phone.
Open the flip.
Press and hold the key .
4 Enter your PIN code if asked
(see page 11).
Then confirm by pressing the
Pilot Key (key ).
5 Wait for the 2 beeps.
The connection is established. The green
LED flashes and the screen looks like this:
To set the time and date, see page 39.
6 Enter the phone number.
If you make a mistake press .
7 Press .
Once connected, your phone emits two
beeps. For best receptionpullthe antenna
out.
8 After the call press .

Before first use
5
Using the carousel
The carousel is a circular loop of icons displayed on the screen. These icons provide access to
the different menus and sub menus used to operate your phone.
You can use the Pilot Key in 3 ways:
- by moving it upwards
- by moving it downwards
- by pressing it in
When you switch on your phone, the idle screen appears.
To access the main menu, press the Pilot Key .
When you move the Pilot Key the carousel moves
across the screen:
- upwards the icons scroll clockwise.
- downwards the icons scroll anti clockwise.
The Pilot Key provides access to all the menus used to operate your phone. To select a
function, place the icon above the cursor and press the Pilot Key .
With the Pilot Key you can select or adjust all the functions of your phone (see Menu Memory
Jogger cards and see the manual for details of menus).
Example
To adjust the contrast
After switching the phone on, press the Pilot Key to access the main Menu:
Organiser
Messages Send SMS
Mailbox no
Read SMS
Settings
Accessories
Security
Network
Main
Menu
PHILIPS
* Depending on the subscriber’s card.
Broadcast SMS
Display
Time and Date
Language
Menu type
Hotkeys
Call settings
Names
Call list
Extras
Quick settings
Events Week view
Day view
Month view
OK
OK
OK
Sounds
SMS settings
Operator Services*
Voice keys

Before first use 6
Move the Pilot Key or and position the icon above the cursor.
Then confirm by pressing the Pilot Key .
This gives you access to the Settings sub menu:
Move the Pilot Key ( or ) and position the icon above the cursor. Then confirm
by pressing the Pilot Key .
You enter the Display menu.
Move the Pilot Key ( or ) and position the icon above the cursor. Then confirm
by pressing the Pilot Key .
You enter the Contrast menu:
The active parameter appears underlined on the screen. In the above example it is Level 3.
Using the Pilot Key, adjust the contrast or and confirm.
Activate/deactivate
Using the Pilot Key, you can activate or de-activate some functions.
Move the Pilot Key or to select On or Off, then confirm.
Using the Names and other lists
You can also use your Names list using the Pilot Key.
In idle mode move the Pilot Key downwards to access the Name list. By moving the Pilot
Key down, you move down into the Names list. Turning it upwards moves up the Names list.
Confirm your selection by pressing on the Pilot Key.
• To return to the previous menu, press or press and hold the
Pilot Key.
• To return to the idle screen, press and hold 1
Settings
Display
Contrast

Before first use
7
Glossary
DTMF Dual Tone Multi Frequency.
The tones are transmitted by the phone to the network. They are used to
interrogate answering machines, transmit codes, ...
EFR Enhanced Full Rate. Standard for high quality sound GSM900. Your phone will switch
EFR on automatically if it is supported by the GSM network you currently use.
FDN Fixed Dialling Numbers. See also Public Names.
GSM network Global System for Mobile communications. The type of phone network used by
your phone.
Home network The network on which your SIM card is registered.
Local network The network where you are making a call. This may be your home network or
another GSM network.
Multi-call Two calls are in progress, one active and one on hold.
PIN code Personal Identification Number. The secret code of the SIM card.
PIN2 code Secret code that allows you to access certain SIM card dependent features.
Public Names Function that allows you to restrict dialling to selected numbers.
PUK code Secret code used to unblock your SIM card if you, or someone else, enters the
wrong PIN code three times.
PUK2 code Secret code used to unblock your SIM card if you, or someone else, enters the
wrong PIN2 code three times.
Roaming Using your phone in a network other than your home network.
SIM card Subscriber Identification Module. The card which allows you to make phone calls
with your GSM phone.
SMS Short Message Service. This service provided by the operator allows you to send
and receive short written messages.