Philips AJL308 User manual

AJ3600
Clock Radio
QUICK START
Thanks for buying Philips AJL308 clock radio.
Our Quick Start guides you through just some of the features on the set.
Please read our instruction booklet to really rise & shine!
AJL308
QUICK START
Register your product and get support at
www.philips.com/welcome
AJL308_05_QSG _CCR 19/9/07, 16:141

IV. Switching off the alarm
•During alarm call, press any button except
REPEAT ALARM / BRIGHTNESS CONTROL.
➜Alarm will auto reset daily.
OR,
•Press REPEAT ALARM / BRIGHTNESS CONTROL.
to enable repeat alarm in 9 minutes.
•To switch off alarm completely, press ALARM 1
or ALARM 2 repeatedly until is changed
to .
➜When alarm is deactivated, displays.When it
is activated, displays.
Helpful hint:
•During alarm call, if no button is pressed, alarm call
will last 30 minutes.
•To set the alarm sound with specific music, select
desired music in the “Alarm Music” of the Clock
menu.
V. Tuner
1.Press TUNER.
2.Press MENU.
➜The Tuner menu appears.
3.Press 4to select “Tuner Auto Program”.
4.Press OK to start the auto search and
programming.
➜20 available stations are programmed (FM).
5.Press 34once or more to select your desired
station.
•In TUNER mode, to turn off radio, press OK. To
turn on radio, press OK again.
•To auto tune to a radio station, press and hold
press and hold 12for about 2 seconds, then
release. (To store particular station, refer to
“Manual programming” of Tuner section in the
user manual.)
English
I. Connecting power
•Connect the supplied mains adapter to the set’s
9V DC jack and the plug into a wall outlet.
II. Setting time and date
1.Press MENU.
2.Use 12 to highlight “Clock”.
3.Use 34to select a field of “Time Set” and “Date
(Year-Month-Day)”.
4.Press OK to confirm.
5.Press or hold down 34to set the values.
6.Press OK to confirm.
7.Repeat Steps 3-6 to set other values of “Time Set
and “Date (Year-Month-Day)”.
8.After finishing the setting, press CLOCK,
TUNER, PICTURE or MUSIC to exit the
setup menu.
Helpful hint:
In the clock mode, to zoom the picture displayed,
press and hold CLOCK for around 2 seconds, then
press OK repeatedly to enlarge picture or resume
to normal size, and use 1234 to pan the
enlarged picture through.To exit the zoom mode,
press CLOCK again.
III. Setting/Activating alarm time
You can set two different alarm times.
1.Press CLOCK.
2.Hold down ALARM 1 or ALARM 2 for about 2
seconds, then release.
3.Press or hold down 34to set hour.
4.Press ALARM 1 or ALARM 2 to confirm.
5.Press or hold down 34 to set minute.
6.Press ALARM 1 or ALARM 2 to confirm.
7.Press again ALARM 1 or ALARM 2 to activate
alarm setting.
➜When alarm is activated, displays.
Before zoom
After zoom
AJL308_05_QSG _CCR 19/9/07, 16:142

VI. Using USB device or SD/MMC
To listen to music or view photo, you need to
connect a USB device and/or memory card to
AJL308.
1.Plug a compatible USB device and/or memory
card (SD or MMC card) to USB port and/or card
slot of AJL308.
➜The folder(s) indicating the inserted device(s)
appears.
2.Press 34 to select the folder of USB device (if
present) or memory card (if present).
3.Press OK to open the folder.
➜The set will auto switch to picture mode.
•To switch to music mode, press MUSIC.
•To switch back to picture mode, press
PICTURE.
4.Select the file you want to play.
5.Press OK to play.
Helpful hint:
•You may change still picture display format on the
screen by selecting “Widescreen” or “Normal”
under “Display Format” option in the “General”
menu.
VII. Setting sleep
•In TUNER or MUSIC mode, press SLEEP until
your desired sleep option is displayed.
➜ The current Tuner or Music playback will
continue.
OR,
•In CLOCK or PICTURE mode, press SLEEP
until your desired sleep option is displayed.
➜ The built-in relaxation music will start playback.
Helpful hint:
•There are several built-in relaxation music, select
your desired one in the “Sleep Timer Music”
option of the “General” menu.
Wide screen Normal
VIII. Brightness control
•Press REPEAT ALARM / BRIGHTNESS CONTROL
repeatedly to cycle screen brightness through 4
levels.
IX. Screen auto dim
To avoid strong light emitting from the unit at
night time, the auto dim function can be used to
adjust the brightness to the lowest level
automatically.
•To turn on auto dim, in the General menu, set On
in “Auto Dim Timer”, then set desired start time in
“ Auto Dim Start”, and set desired end time in
“Auto Dim End”.
➜ During auto dim time span, press any button to
increase screen brightness, and it will last for 10
seconds.
X. Using the stand
The set is equipped with a stand on the bottom
panel.To set the unit for a different viewing angle,
take the stand out, then place it back by reversing
(see the figure below) the side of the stand.
AJL308_05_QSG _CCR 19/9/07, 16:143