Philips AJ3650/12 User manual

Clock Radio AJ 3650
User Manual
Manuel d'utilisation
Manual de usuario
Benutzerhandbuch
Gebruikershandleiding
Manuale dell'utente

REPEAT ALARM/BRIGHTNESS CONTROL
DATE/SET TIME AUTO SCAN
FOCUS
DISPLAY
0
9
1
23
4
5
8
7
6
1

DC IN 7.5V
Model No. :AJ3650/12
DC 3V CR2032 (Backup Battery)
ExtAC-DCAdaptor
DC 7.5V 1A
Designed and Developed by Philips, Holland
Clock memory
back up
CR2032 battery
PUSH
TUNING
PRESET
+
+
VOLUME
(
&
@
!#
$
*
%
^
2

3
5
6
7
1
2
4
3
4

English
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register
your product at www.philips.com/welcome.
SUPPLIED ACCESSORIES
– 1 switching power adapter
(Model: DSA-9W-69F EU 075100, Input: 100-240V~50/60 Hz, 0.5 A,
Output: 7.5 V, 1.0 A)
– 1 outdoor temperature sensor
FRONT and TOP PANEL (See 1)
1PROJECTION/IMAGE FLIP
– toggles projection on and off
– LED light on/off indication
– switches project brightness levels between: bright, dim, very dim
– press and hold it to flip the image
2 RADIO
– switches the radio on/off
– displays radio frequency
3SLEEP
– switches sleep timer between: 15->30-> 60->90->120->OFF
4ALARM 1
– press it to switch on or off ALARM 1
– press and hold it to set time and alarm sound of ALARM 1
– press it to display status of ALARM 1
5ALARM 2
– press it to switch on or off ALARM 2
– press and hold it to set time and alarm sound of ALARM 2
– press it to display status of ALARM 2

6
REPEAT ALARM/BRIGHTNESS CONTROL
– turns off the alarm temporarily and repeats alarm after 9 minutes
–
press to turn on or off the blue background light
7
AUTO SCAN
– in tuner mode, press and hold it to scan radio stations automatically and
stores them as preset stations
– clock and projection mode, press and hold it to search the outdoor tempera-
ture sensor
8 DATE/SET TIME
– press and hold it to
set time, date, and year
– press it to display date and day of week
9DISPLAY
– press it to toggle between indoor and outdoor temperatures
– press and hold it to display indoor temperature, outdoor temperature, and day of
week cyclically
0FOCUS
– adjusts focus of the projector to make projection clear
LEFT, RIGHT, and BACK PANEL (See 2)
! PUSH
–
press it to pop out the projection lens for angle adjustment
@ PRESET +/-
– selects a preset station
– press and hold it to set current frequency as the preset station
– adjusts the preset station number in radio mode
– selects a track of relaxation music during setting sleep timer
#TUNING +/-
– tunes to radio stations
– sets time, date, and year
– selects alarm sounds during alarm setting

$VOLUME
– adjusts the sound level
%
DC IN
– socket for AC/DC 7.5 V adapter
^ Pigtail
– temperature sensor and antenna to enhance FM reception
& RESET
– press if the set does not react to operation of any button
* Battery compartment
– holds the clock backup battery
( IMAGE ROTATE
– rotates the image by 90 degrees clockwise or counterclockwise
Controls on the sensor (See 3)
1LCD display
– shows current temperature, and low battery indication of the sensor
2LED light
– flashes when the sensor is transmitting
3RESET
– resets to start transmitting
4(oC oF) Slide Switch
– selects between Centigrade (oC) or Fahrenheit (oF) temperature unit dis-
play
5CHANNEL 1/ 2 /3
– selects RF channel to transmit and receive between the senor and the
main unit
6Door lock
– turns to lock and un-lock the sensor door.
7Sensor support
– pulls out to stand the sensor
POWER SUPPLY
Mains adapter
1
Connect the mains adapter to the set's DC IN socket and to the power socket.

2 Always disconnect the mains adapter if you are not using the set.
Helpful hints:
To avoid damage to the set, use only the adapter supplied!
SETTING THE CLOCK
The clock uses 24-hour time format.
Important!
Pull out the plastic protective sheet to activate the clock backup battery
(CR2032). This battery is included and installed in the set.
Manual setting
1. Press and hold DATE/SET TIME to enter the clock setting mode.
™
Year digits start flashing.
2. Hold down or press TUNING +/- repeatedly to set the current year.
3. Press DATE/SET TIME to confirm.
™ Month digits start flashing.
4. Hold down or press TUNING +/- repeatedly to set the current month.
5. Press DATE/SET TIME to confirm.
™ Date digits start flashing.
6. Hold down or press TUNING +/- repeatedly to set the current date.
7. Press DATE/SET TIME to confirm.
™ Date and Month indicators, D and M, start flashing.
8. Press TUNING +/- repeatedly to set the desired date format.
9. Press DATE/SET TIME to confirm.
™ Hour digits start flashing.
10. Hold down or press TUNING +/- repeatedly to set the current hour.
11. Press DATE/SET TIME to confirm.
™ Minute digits start flashing.
12. Hold down or press TUNING +/- repeatedly to set the current minute.

13. Press DATE/SET TIME to confirm.
™ Hr and offset number start flashing.
14. Press TUNING +/- repeatedly to set the desired hour offset value.
15. Press DATE/SET TIME to confirm.
RADIO
TUNING TO RADIO STATONS
Automatic tuning
• Press and hold TUNING +/- to automatically tune to the next or previous station of
sufficient reception.
Manual tuning
• Press TUNING +/- briefly or repeatedly until you reach the desired frequency.
To improve reception:
Extend and position the pigtail fully to obtain optimum reception.
STORING PRESET STATIONS
You can store up to a total of 15 radio stations in the memory.
Manual scanning
1. Tune to your desired station (see TUNING TO RADIO STATONS ).
2. To store a preset station, hold down
PRESET +/- briefly until the preset number
appears.
3. Press PRESET +/- repeatedly to select the preset station number.
• You can overwrite a preset station by storing another frequency in its place.
Automatic scanning
1. Press and hold AUTO SCAN until the frequency digits start flashing.
™
The set scans all available stations and stores them as preset stations in
sequence.
™ The set starts to play preset 1 when finishes scanning.
LISTENING TO RADIO
1. Press RADIO once to switch on the radio.

™ Display shows the radio frequency of the last selected station briefly
before returning to the clock time. Your preset station is also shown if you
are listening to a preset station.
2. Adjust volume by turning VOLUME .
3.
Press RADIO to switch off.
Helpful hints:
– When clock time is displayed, to view the current radio frequency,
•Press RADIO
twice.
•For preset stations, press the respective PRESET button once or repeatedly.
USING THE ALARM
Two different alarm times can be set. This can be useful when you and your part-
ner need to be woken up at different time. Besides, you can set different alarm
sounds respectively among tuner or sounds of nature.
SETTING THE ALARM
1. Press and hold ALARM 1 until hour digits start flashing.
2.
Hold down or press TUNING +/- repeatedly to set the desired hour.
3. Press ALARM 1 to confirm.
™ Minute digits start flashing.
4. Hold down or press TUNING +/- repeatedly to set the desired minute.
5. Press ALARM 1 to confirm.
™ starts flashing.
6. Press TUNING +/- repeatedly to select the desired alarm sound.
7. Press ALARM 1 to confirm.
8. Repeat the steps above but press ALARM 2 instead of ALARM 1 to set the
other alarm.
Helpful hints:
– If you have selected radio as the alarm sound, make sure you have properly tuned
to a station and set the volume before turning off the radio.
– To check the alarm time setting for ALARM 1 or ALARM 2, press ALARM 1 or
ALARM 2.
– It is not possible to adjust the alarm time during an alarm call or alarm repeating mode.