Philips AJM180/12 User manual

AJM180
CD Clock Radio
QUICK START
MISE EN SERVICE RAPIDE
INICIO RÁPIDO
SCHNELLSTART
SNELSTART
AVVIVO RAPIDO
Thanks for buying Philips AJM180 CD Clock Radio.
Our Quick Start guides you through just some of the features on the set.
Please read our instruction booklet to really rise & shine!
AJ180_12-QSG_CCR 2008.2.25, 11:401

ENGLISH
1 Power supply
•Connect the supplied mains adapter to the set’s
9V DC jack and the plug into a wall outlet.
2Setting the Clock
a.In standby mode, press PROGRAM/ SETTIME.
b.Press and hold HOUR/MIN to adjust time.
c.Press PROGRAM/ SETTIME to confirm.
3Setting alarm time and mode
a.In standby mode, press AL1 or AL2.
b.Press and hold HOUR/MIN to adjust time.
c.Press AL1/AL2 again, and then press SOURCE
to select alarm mode.
d.Press corresponding AL1/AL2 to confirm the
setting.
Helpful hints:
–If you have selected RADIO, make sure you have
properly tuned to a station before turning off the set.
4Switching off the alarm
•Either press briefly: AL1/AL2/POWER or
REPEATALARM.
5Listening to the Radio
a.Press POWER to switch on from standby.
b.Press SOURCE to select TUNER.
c.Press and hold PROGRAM/ SETTIME to
program all available stations.
d.Press PRESET/ALBUM 34 until the desired
preset station is displayed.
6Playing a disc
This CD clock radio can play audio discs including
CD-R, CD-RW, and MP3.
a. Press POWER to switch on from standby.
b.Press SOURCE to select CD.
c.Lift the CD door to open.
d.Insert a CD with the printed side facing up, and
close the CD door.
e.Press ); to start playback.
7Playing a USB device
a. Press POWER to switch on from standby .
b. Press SOURCE to enter USB mode if USB is
NOT displayed.
c. Plug a compatible USB mass storage device to
AJM180’s USB port marked .
d. Press ); on your AJM180 to start playback.
3a, 3c, 3d,4
4
5a
6a
7a
1
3a, 3c, 3d,4
5d
3c
5b
6b
7b
6e
7d
2b
3b
DC 9V
USB DIRECT
2a
2c
5c
AJ180_12-QSG_CCR 2008.2.25, 11:402