Setup
2
1Dock the iPod / iPhone on the unit.
2Open the iPod / iPhone.
Time and date information on»
the iPod / iPhone transfers to
the unit automatically.
To set time and date manually:
1In standby mode, press and hold
DATE • AUTO TUNE/TIME SET for
2 seconds.
[24 HR] begins to blink.»
2Press TUNING +/- or /to
select 12/24 hour format.
3Press DATE • AUTO TUNE/TIME
SET to conrm.
The hour digits begin to blink.»
4Press TUNING +/- or /to set
the hour.
5Press DATE • AUTO TUNE/TIME
SET to conrm.
Set time and date
A
1In the tuner mode, press and hold
DATE • AUTO TUNE/TIME SET
for more than 2 seconds to acti-
vate automatic program mode.
[AUTO] (auto) displays.»
All available stations are»
programmed in the order of
waveband reception strength.
The rst programmed radio sta-»
tion is broadcast automatically.
ETip
Detailed functions and features are•
described in the user manual.
Program radio stations
automatically
APlay from iPod/iPhone B
Setup
2Enjoy
2
3
You can set two alarms which go off at
different time.
1Ensure that you have set the clock
correctly.
2Press and hold AL 1 or AL 2 for 2
seconds.
[AL 1] or [AL 2] begin to blink.»
3Press SOURCE r epeatedly to
select an alarm sound source:
iPod/iPhone, iPod/iPhone playlist,
FM tuner, or buzzer.
4Press AL 1 or AL 2.
Hour digits begin to blink.»
5Press TUNING +/- or /
repeatedly to set the hour.
2
1Place the iPod/iPhone into the
dock.
2Press SOURCE repeatedly to
select iPod/iPhone source.
The connected iPod/iPhone»
plays automatically.
To pause• /resume play, press
.
To skip to a track, press•
/ .
To search during play, press•
and hold / , then release
to resume normal play.
Set the alarm timer
B
6Press AL 1 or AL 2 to conrm.
Minute digits begin to blink.»
7Repeat steps 5-6 to set the minute.
8 Repeat steps 5-6 to select whether
to ring alarm the whole week, on
weekdays, or at weekend.
9Repeat steps 5-6 to set the alarm
volume.
Activate and deactivate the alarm timer
1Press AL 1 or AL 2 repeatedly to
activate or deactivate the timer.
If the timer is activated, [»AL 1]
or [ AL2] is displayed.
If the timer is deactivated,»
before [AL1] or [AL2] disappears.
Repeat alarm
1When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing»
minutes later.
ETip
You can press•/to adjust the
interval to repeat alarm.
Stop alarm ring
1When the alarm rings, press the
corresponding AL 1 or AL 2.
The alarm stops but the alarm»
settings remain.
The minute digits begin to blink.»
6Repeat steps 4-5 to set the minute,
year, month, and day.
