Philips HD8827 User manual

HD8827
HD8827_FRONT-COVER.indd 1 15-01-16 15:17

English 5
Polski 32

2
1
X
X
Aroma plus
Hot water
Steam
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coffee
14
15
4
5
6
1 2 3
13
11
12
10
26
24
20
34
33
32
35
28
17
16
27
25
22
7 8 9
2930
31
19 18
23
21
1

English
Contents
Introduction 6
Important 6
Danger 6
Warning 6
Caution 7
Electromagnetic fields (EMF) 7
Machine overview (Fig. 1) 7
First installation 8
Circuit priming 10
Automatic rinsing cycle 10
Manual rinsing cycle 11
Measuring the water hardness 12
Installing the Intenza+ water filter 12
Using the machine 14
Beverage types and lengths 14
Brewing espresso, espresso lungo and coffee 14
Adjusting the coffee dispensing spout 14
Brewing 1 cup of espresso, espresso lungo and coffee 14
Brewing 2 cups of espresso, espresso lungo and coffee 15
Frothing milk 15
Hot water 16
Adjusting quantity and taste 16
Saeco Adapting System 16
Activating the aroma plus function 16
Adjusting coffee length with the MEMO function 16
Adjusting the grinder settings 17
Maintenance and care 17
Cleaning the drip tray and the coffee grounds container 17
Cleaning the brew group 18
Lubrication 20
Classic milk frother cleaning (daily) 21
Classic milk frother and steam wand cleaning (weekly) 21
Descaling 21
Descaling procedure 21
Interruption of the descaling cycle 23
Meaning of light signals 24
Troubleshooting 27
Recycling 30
Guarantee and support 30
Ordering maintenance products 30
Technical specifications 30
5
English

Introduction
Congratulations on your purchase of a Philips fully automatic coffee
machine with Classic Milk Frother! To fully benefit from the support that
Philips offers, please register your product at www.philips.com/welcome.
The machine is suitable for preparing espresso and coffee using whole
coffee beans, as well as for dispensing steam and hot water. In this user
manual you will find all the information you need to install, use, clean and
descale your machine.
If you experience any future problems with your machine or have other
questions, have a look on our support page at www.philips.com/support.
Here you can find all detailed information on cleaning and maintenance,
frequently asked questions, support movies and the user manuals.
Important
This machine is equipped with safety features. Nevertheless, read and
follow the safety instructions carefully and only use the machine as
described in these instructions, to avoid accidental injury or damage due to
improper use of the machine. Keep this user manual for future reference.
Danger
Warning
-Connect the machine to a wall socket with a voltage matching the
technical specifications of the machine.
-Connect the machine to an earthed wall socket.
-Do not let the power cord hang over the edge of a table or counter, or
touch hot surfaces.
-Never immerse the machine, mains plug or power cord in water (danger
of electrical shock).
-Do not pour liquids on the power cord connector.
-Never direct the hot water jet towards body parts: danger of burns.
-Do not touch hot surfaces. Use handles and knobs.
-Switch off the machine with the main switch located on the back and
remove the mains plug from the socket:
-If a malfunction occurs.
-If the machine will not be used for a long time.
-Before cleaning the machine.
-Pull on the plug, not on the power cord.
-Do not touch the mains plug with wet hands.
-Do not use the machine if the mains plug, the power cord or the machine
itself is damaged.
-Do not make any modifications to the machine or its power cord.
-Only have repairs carried out by a service center authorized by Philips to
avoid a hazard.
-The machine should not be used by children younger than 8 years old.
6English

-This machine can be used by children aged from 8 years and above and
by persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the machine in a safe way and if they
understand the hazards involved.
-Cleaning and user maintenance shall not be made by children unless
they are older than 8 and supervised.
-Keep the machine and its cord out of the reach of children aged less than
8 years.
-Children should be supervised to ensure that they do not play with the
machine.
-Never insert fingers or other objects in the coffee grinder.
Caution
-This machine is intended for normal household use only. It is not
intended for use in environments such as staff kitchens of shops, offices,
farms or other work environments.
-Always put the machine on a flat and stable surface. Keep it in upright
position, also during transport.
-Do not place the machine on a hotplate or directly next to a hot oven,
heater or similar source of heat.
-Only put roasted coffee beans in the bean hopper. If ground coffee,
instant coffee, raw coffee beans or any other substance is put in the
coffee bean hopper, it may cause damage to the machine.
-Let the machine cool down before inserting or removing any parts. The
heating surfaces may retain residual heat after use.
-Never fill the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the machine.
-Never use souring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the machine. Simply use a soft cloth
dampened with water.
-Descale your machine regularly. The machine indicates when descaling is
needed. Not doing this will make your appliance stop working properly.
In this case repair is not covered under your guarantee.
-Do not keep the machine at temperatures below 0°C.Water left in the
heating system may freeze and cause damage.
-Do not leave water in the water tank when the machine is not used over
a long period of time. The water can be contaminated. Use fresh water
every time you use the machine.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Machine overview (Fig. 1)
1 ESPRESSO button
2 ESPRESSO LUNGO button
3 COFFEE button
7
English

4 ON/OFF button
5 AROMA STRENGTH button
6 HOT WATER/ STEAM button
7 Descaling cycle light
8 CALC CLEAN button
9 Rinse cycle light
10 General warning light
11 No coffee light
12 Empty coffee grounds container light
13 No water light
14 Coffee dispensing spout
15 Classic milk frother
16 Lid of the water tank
17 Lid of the bean hopper
18 Main switch
19 Socket for cord
20 Service door
21 Grinder adjustment knob
22 Water tank
23 Brew group
24 Inside of maintenance door with cleaning instructions
25 Coffee exit duct
26 Coffee residues drawer
27 Drip tray full indicator
28 Coffee grounds container
29 Drip tray
30 Drip tray cover
31 Cord
32 Cleaning brush
33 Grease
34 Water hardness tester
35 Multifunctional tool (grinder adjustment key and coffee duct cleaning
tool)
First installation
This machine has been tested with coffee. Although it has been carefully
cleaned, there may be some coffee residues left. We guarantee, however,
that the machine is absolutely new.Like with most full-automatic machines,
you first need to brew some coffees to enable the machine to complete its
self-adjustment and get the best tasting coffee.
1Remove all packaging material from the machine.
15 cm
15 cm
15 cm
15 cm
15 cm
15 cm
15 cm
15 cm
2Place the machine on a table or worktop away from the tap, the sink and
heat sources.
Note: Leave at least 15 cm of free space above, behind and on both sides
of the machine.
3Note: This machine may only be operated by a properly trained person.
Never let the machine operate unattended.
8English

MAX
CALC
CLEAN
MAX
4Rinse the water tank. Fill the water tank with fresh water to the MAX level
indication.
5Open the lid of the bean hopper. Fill the bean hopper with coffee beans
and close the lid.
Note: Do not overfill the bean hopper to avoid damage to the grinder.
Caution: Only use espresso beans. Never use ground coffee, unroasted
coffee beans or caramelized coffee beans, as this may cause damage
to the machine.
Note: Do not add pre-ground coffee, water or coffee beans in the exit
duct.
2
1
6Insert mains plug into a wall socket (1) and insert the small plug into the
socket located on the back of the machine (2).
7Set the main switch to the ON position to switch on the machine.
8Press the ON/OFF button.
9
English

Circuit priming
During the initial heat-up process, fresh water flows through the internal
circuit to heat up the machine. This takes a few seconds.
1Place a container under the classic milk frother.
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coee
2The no water and general warning lights flash simultaneously.
-The ESPRESSO button lights up.
Aroma plus
Hot water
Steam
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coee
Espresso
Memo
3Press the Espresso button.
-The machine is heating up and the ESPRESSO, ESPRESSO LUNGO
and COFFEE buttons flash simultaneously.
Automatic rinsing cycle
When the machine has heated up, it performs an automatic rinsing cycle to
clean the internal circuit with fresh water. During the cycle water flows from
the coffee spout.
1Place a container under the coffee dispensing spout.
Aroma plus
Hot water
Steam
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coee
-The ESPRESSO, ESPRESSO LUNGO and COFFEE buttons flash
simultaneously.
-The cycle ends automatically.
10 English