Philips CD170 User manual

Register your product and get support at
www.philips.com/welcome
CD170
CD175
EN User manual
IFU_CD170-175_05_EN.indd 1 2009-12-17 17:30:25

Philips Consumer Lifestyle
Philips Consumer Lifystyle AMB 544-9056
AQ95-56F-1221_2KR 2010
........................................................ ...........................................................................
(Report No.) (Year in which the CE mark is affixed)
EC DECLARATION OF CONFORMITY
We, PHILIPS CONSUMER LIFESTYLE B.V.
TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS
Declare under our responsibility that the electrical product(s):
PHILIPS CD170, CD175, SE170, SE175
....................................................................... ...........................................................
(brand name) (Type version of model)
DECT Phone
(Telecommunication Terminal Equipment)
_
..............................................................................................
(product description)
To which this declaration relates is in conformity with the following harmonized standards:
(title, number and date of issue of the standard)
EN 301 406 V1.5.1 (07-2003)
EN 301 489-1 V1.8.1 (2008-04)
EN 301 489-6 V1.2.1 (2002-08)
_
EN 60950-1:2006
EN 50360:2001
EN 50361:2001
_
EN 62018:2003
Following the provisions of :
1999/5/EC (R&TTE Directive)
2009/125/EC (EuP Directive)
- EC/1275/2008
- EC/278/2009
And are produced under a quality scheme at least in conformity with ISO 9001
or CENELEC Permanent Documents
The Notified Body .................................................... performed ................................................
BABT / 0168 Notified Body Opinion
(Name and number) (description of intervention)
And issued the certificate, ............ .....................................................
N.A.
(certificate number)
Remarks:
Drachten, The Netherlands A.Speelman, Compliance Manager
... ................................ .......................................................................................................................................
04/12/2009
(place,date) (signature, name and function)
IFU_CD170-175_05_EN.indd 2 2009-12-17 17:30:25

3
English
EN
Contents
1 Important safety instructions 5
Declaration of conformity 5
Use GAP standard compliance 6
Compliance with EMF 6
Disposal of your old product and
batteries 6
2 Your CD170/CD175 8
What is in the box 8
Overview of the phone 9
Overview of the base station 10
Display icons 11
3 Get started 12
Connect the base station and charger 12
Install the handset 12
Check the battery level 13
Set the country 13
Set the date and time 14
Set the date and time format 14
Display the date and time 14
What is standby mode? 14
Check the signal strength 14
Switch your handset On/Off 14
4 Calls 15
Make a call 15
End a call 15
Answer a call 16
Adjust the earpiece volume 16
Mute the microphone 16
Make a second call 16
Answer a second call 16
Toggle between two calls 16
Make a conference call with the
external callers 16
5 Intercom and conference calls 17
Make a call to another handset 17
Transfer a call 17
Make a conference call 17
6 Text and numbers 18
Enter text and numbers 18
7 Phonebook 19
View the phonebook 19
Search a record 19
Call from the phonebook 19
Access the phonebook during a call 19
Add a record 19
Edit a record 20
Delete a record 20
Delete all records 20
Direct access memory 20
8 Call log 21
View the call records 21
Save a call record to the phonebook 21
Delete a call record 21
Delete all call records 21
Return a call 21
9 Redial list 22
View the redial records 22
Redial a call 22
Save a redial record to the phonebook 22
Delete a redial record 22
Delete all redial records 22
10 Self-denedsettings 23
Personalize the phone display 23
Personalize the sounds 23
11 Call features 25
Dial mode 25
Select the recall duration 25
Manage the area code 25
Carrier code 25
First ring 26
ECO mode 26
IFU_CD170-175_05_EN.indd 3 2009-12-17 17:30:26

4
EN
12 Extra features 27
Auto clock 27
Alarm clock 27
Keypad lock 27
Locate the handset 28
13 Advanced settings 29
Enhance the audio quality 29
Register the handsets 29
Unregister the handsets 29
Restore default settings 30
14 Telephone answering machine 31
Turn on/off the answering machine 31
Set the answering machine language 31
Set the answer mode 31
Announcements 32
Incoming messages (ICM) 33
Set the ring delay 33
Remote access 34
Call screening 35
Behavior of the LED key on the
base station 35
15 Default settings 36
16 Technical data 37
17 Frequently asked questions 38
IFU_CD170-175_05_EN.indd 4 2009-12-17 17:30:26

5
Do not expose the phone to excessive heat•caused by heating equipment or direct sunlight.
Do not drop your phone or allow objects to
•fall on your phone.
Do not use any cleaning agents containing
•alcohol, ammonia, benzene, or abrasives as
these may harm the set.
Do not use the product in places where there
•are explosive hazards.
Do not let small metal objects come into
•contact with the product. This can deteriorate
audio quality and damage the product.
Active mobile phones in the vicinity may cause
•interference.
Metallic objects may be retained if placed near
•or on the handset receiver.
About operating and storage temperatures
Operate in a place where temperature is•
always between 0°C to +35°C (32°F to
95°F).
Store in a place where temperature is•
always between -20°C and +45°C (-4° F
to 113° F).
Battery life may be shortened in low•
temperature conditions.
Declaration of conformity
Hereby Philips Consumer Lifestyle, P&A,
declares that the CD170/CD175 is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/
EC.YoucanndtheDeclarationofConformity
on www.p4c.philips.com.
This product has been designed, tested and
manufactured according the European R&TTE
directive 1999/5/EC. Following this directive,
this product can be brought into service in the
following countries:
1 Important safety
instructions
Power requirements
This product requires an electrical supply•
of 100-240 volts AC. In case of power
failure, the communication can be lost.
Thevoltageonthenetworkisclassied•
as TNV-3 (Telecommunication Network
Voltages),asdenedinthestandardEN
60950.
Warning
TheElectricalnetworkisclassiedas•hazardous. The only way to power down the
charger is to unplug the power supply from
the electrical outlet. Ensure that the electrical
outlet is always easily accessible.
To avoid damage or malfunction
Caution
Use only the power supply listed in the user•instructions.
Use only the batteries listed in the user
•instructions.
Do not allow the charging contacts or the
•battery to come into contact with metal objects.
Do not open the handset, base station or charger
•as you could be exposed to high voltages.
Do not allow the charger to come into contact
•with liquids.
Risk of explosion if battery is replaced by an
•incorrect type.
Dispose of used batteries according to the
•instructions.
Always use the cables provided with the
•product.
For pluggable equipment, the socket-outlet
•shall be installed near the equipment and shall
be easily accessible.
Handsfree activation could suddenly increase the
•volume in the earpiece to a very high level: make
sure the handset is not too close to your ear.
This equipment is not designed to make
•emergency calls when the power fails. An
alternative has to be made available to allow
emergency calls.
English
EN
IFU_CD170-175_05_EN.indd 5 2009-12-17 17:30:26

6
Disposal of your old product
and batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
When this logo is attached to a product, it
meansanancialcontributionhasbeenpaidto
the associated national recovery and recycling
system.
Use GAP standard
compliance
The GAP standard guarantees that all DECT™
GAP handsets and base stations comply with
a minimum operating standard irrespective of
their make.The handset and base station are
GAP compliant, which means they guarantee
the minimum functions: register a handset,
take the line, make a call and receive a call.The
advanced features may not be available if you
use them with other makes.To register and use
this handset with a GAP compliant base station
ofdifferentmake,rstfollowtheprocedure
described in the manufacturer’s instructions,
then follow the procedure described in this
manual for registering a handset.To register a
handset from different make to the base station,
put the base station in registration mode, then
follow the procedure described in the handset
manufacturer’s instructions.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers,
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects.Philipsconrmsthatifitsproductsare
handled properly for their intended use, they
aresafetouseaccordingtoscienticevidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardization for early
integration in its products.
EN
IFU_CD170-175_05_EN.indd 6 2009-12-17 17:30:27

7
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
English
EN
IFU_CD170-175_05_EN.indd 7 2009-12-17 17:30:27

8
Handset**
Charger**
Power adapter**
2 Your CD170/
CD175
Congratulations on your purchase and welcome
to Philips!
TofullybenetfromthesupportthatPhilips
offers, register your product at www.philips.
com/welcome.
What is in the box
Base station (CD170)
Base station (CD175)
EN
IFU_CD170-175_05_EN.indd 8 2009-12-17 17:30:28

9
Overview of the phone
Line cord*
Guarantee
User manual
Quick start guide
Note
* In some countries, you have to connect the•line adapter to the line cord, then plug the line
cord to the telephone socket.
Note
** In multi-handset packs, there are additional•handsets, chargers and power adapters.
English
EN
IFU_CD170-175_05_EN.indd 9 2009-12-17 17:30:29

10
15 OK Conrmselection.•
Enter the options•
menu.
16 Buzzer
17 Battery
door
Overview of the base station
CD170
1 Find handsets.•
Enter registration mode.•
CD175
1Earpiece
2BACK Delete text or•
digits.
Cancel operation.•
3Scroll up on the•
menu.
Increase the•
earpiece volume.
Enter the call log.•
4Scroll down on the•
menu.
Decrease the•
earpiece volume.
Enter the•
phonebook.
5End the call.•
Exit the menu/•
operation.
Press and hold to•
turn the handset
on/off.
6RSendtheashsignal.•
7REDIAL Enter redial list.•
8Press and hold to•
enter a pause to
make a predial call
(see “Make a call” in
the Calls section).
Press and hold to•
turn the ringer on/
off.
9INT Make the intercom•
call.
Press and hold to•
make a conference
call.
10 Microphone
11 Mute/unmute the•
microphone.
12 Press and hold to•
lock/unlock keypad.
13 MENU Access the main•
menu.
14 Make and receive•
calls.
EN
IFU_CD170-175_05_EN.indd 10 2009-12-17 17:30:31

11
Display icons
In standby mode, the icons shown on the main
screen tell you what features are available on
your handset.
Icon Descriptions
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium
and low).
When the handset is on the base
station/charger, the bars keep
scrolling until charging completes.
Theemptybatteryiconashes
and you hear an alert tone.
The battery is low and needs
recharging..
It displays the link status between
the handset and base station. The
more bars are shown, the better
the signal strength is.
The call is in progress.
The alarm is activated.
The ringer is off.
Call log
Answering machine
There is an unheard voice
message.
Scroll up for more options
Scroll down for more options
More digits or characters on the
right
ECO The ECO mode is activated.
1Loudspeaker
2/ Increase/decrease•
the speaker
volume.
3Turn the answering•
machine on/off.
4Delete messages.•
5/ Skip forward/•
backward during
playback.
6Play messages.•
Stop messages•
playback.
7 LED
indicator
Flashing at 1 second
interval:
Unread messages.•
Ongoing remote•
operation through
the handset.
Fastashingat0.5
second interval:
The answering•
machine memory
is full.
Steady on:
The answering•
machine is on.
Ongoing answering•
machine operation.
8Find handsets•
Enter registration•
mode
English
EN
IFU_CD170-175_05_EN.indd 11 2009-12-17 17:30:36

12
3Connect each end of the line cord to:
the telephone socket at the bottom of•
the base station;
the telephone socket on the wall.•
Install the handset
Caution
Risk of explosion! Keep batteries away from•
heat,sunshineorre.Neverdiscardbatteries
inre.
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix•different brands or types of batteries.
Note
Chargethebatteriesfor16hoursbeforerst•use.
Warning
Check the battery polarity when inserting in•the battery compartment. Incorrect polarity
may damage the product.
3 Get started
Caution
Ensure you have read the safety instructions in•the “Important” section before you connect
and install your handset.
Connect the base station and
charger
Warning
Risk of product damage! Ensure that the•power supply voltage corresponds to the
voltage printed on the back or the underside
of the phone.
Use only the supplied power adapter to charge
•the batteries.
Note
If you subscribe to the digital subscriber line•(DSL) high speed internet service through
your telephone line, ensure you install a DSL
lterbetweenthetelephonelinecordand
thepowersocket..Thelterpreventsnoise
and caller ID problems caused by the DSL
interference. For more information on the DSL
lters,contactyourDSLserviceprovider.
The type plate is located on the bottom of the
•base station.
1Connect each end of the power adapter
to:
the DC input jack at the bottom of the•
base station;
the power socket on the wall.•
2Connect each end of the power adapter
to (for multi handset packs):
the DC input jack at the bottom of the•
extra handset charger.
the power socket on the wall.•
EN
IFU_CD170-175_05_EN.indd 12 2009-12-17 17:30:36

13
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium
and low).
When the handset is on the base
station/charger, the bars keep
scrolling until charging completes.
Theemptybatteryiconashes.
The battery is low and needs
recharging.
The handset turns off if the batteries are empty.
If you are on the phone, you hear warning
tones when the batteries are almost empty.The
call gets disconnected after the warning.
Set the country
To make the phone work, select your country.
1When you see the welcome message,
press OK.
2Select your country, press OKtoconrm.
The country setting is saved.»
3Set the date and time.
The phone is now ready to use.»
To set the date and time later, press»
BACK to skip this setting.
aThe batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
bPlace the handset on the base station to
charge the handset. When the handset
is placed correctly on the base station,
your hear a docking sound.
The handset starts charging.»
Note
If the handset becomes warm when the•batteries are being charged, it is normal.
English
EN
IFU_CD170-175_05_EN.indd 13 2009-12-17 17:30:37

14
Check the signal strength
It displays the link status between
the handset and base station. The
more bars are shown, the better
the signal strength is.
Ensure the handset is linked to the base•
station before you make or receive calls
and carry out the phone functions and
features.
If you hear warning tones when you are•
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
nearer to the base station.
Switch your handset On/Off
Press and hold• to switch off the
handset. The handset’s screen turns off.
Note
When the handset is switched off, no call can•be received.
Press and hold• to switch on the
handset. It takes a few seconds for the
handset to power up.
Set the date and time
1Press MENU.
2Select [CLOCK&ALARM] > [DATE/
TIME], then press OKtoconrm.
3Press the numeric buttons to enter the
date, then press OKtoconrm.
On the handset, the time set menu is»
displayed.
4Press the numeric buttons to enter the
time.
If the time is in 12-hour format, press•
/ to select [AM] or [PM].
5Press OKtoconrm.
Set the date and time format
1Press MENU.
2Select [CLOCK&ALARM] > [SET
FORMAT], then press OKtoconrm.
3Select [DATE FORMAT] or [TIME
FORMAT].
4Select the setting. Select [DD/MM] or
[MM/DD] as the date display and [12
HOURS] or [24 HOURS] as the time
display. Then press OKtoconrm.
The setting is saved.»
Display the date and time
1Press and hold OK.
2Press and hold OK again to display the
handset name.
What is standby mode?
Your phone is in standby mode when it is idle.
The standby screen displays the handset name
and number/date and time, signal icon, and
battery icon.
EN
IFU_CD170-175_05_EN.indd 14 2009-12-17 17:30:38

15
Call from the redial list
You can make a call from the redial list.
Tip
For more information, see “Redial a call” in the•Redial list section.
Call from the phonebook
You can make a call from the phonebook list.
Tip
For more information, see “Call from the•phonebook” in the Phonebook section.
Call from the call log
You can return a call from the received or
missed call log.
Tip
For more information, see “Return a call” in•the Call log section.
Note
The call timer displays the talk time of your•current call.
Note
If you hear warning tones, the handset is•almost out of battery or the handset is out
of range. Charge the battery or move the
handset nearer to the base station.
End a call
You can end a call in these ways:
Press• ; or
Place the handset to the base station•
or charging cradle.
4 Calls
Note
When the power fails, the phone cannot•access emergency services.
Tip
Check the signal strength before you make•a call or when you are in a call. For more
information, see “Check the signal strength” in
the Get started section.
Make a call
You can make a call in these ways:
Quick call•
Dial before you call•
Redial the most recent number•
Call from the redial list.•
Call from the phonebook list•
Call from the call log•
Quick call
1Press .
2Dial the phone number.
The number is dialed out.»
The duration of your current call is»
displayed.
Dial before you call
1Dial the phone number
To erase a digit, press• BACK.
To enter a pause, press and hold• .
2Press to dial out the call.
Redial the most recent number
1Press .
2Press REDIAL.
3Press .
The most recent number is then dialed»
out.
English
EN
IFU_CD170-175_05_EN.indd 15 2009-12-17 17:30:38

16
1Press Rduring a call.
Therstcallisputonhold.»
2Dial the second number.
The number displayed on the screen is»
dialed out.
Answer a second call
Note
This service is network dependent.•
When there is a periodical beep to notify you
of an incoming call, you can answer the call in
these ways:
1Press Rand to answer the call.
Therstcallisputonhold,andyou»
are now connected to the second call.
2Press Rand to end the current call
and answer the second call.
Toggle between two calls
1Press Rand .
The current call is put on hold, and you»
are now connected to the other call.
Make a conference call with
the external callers
Note
This service is network dependent. Check with•the service provider for additional charges.
When you are connected to two calls, press R,
then .
The two calls are combined and a»
conference call is established.
Answer a call
When the phone rings, press to answer
the call.
Note
The caller ID service is available if you have•registered to the caller ID service with your
service provider.
Tip
When there is a missed call, the handset•
displaysanoticationmessage.
Turn off the ringer for all incoming
calls
There are two ways to turn off the ringer:
1Press and hold in standby mode.
»displays on the screen.
2When the phone rings, press BACK.
Adjust the earpiece volume
Press or to adjust the volume during a call.
The earpiece volume is adjusted and the phone
is back to the call screen.
Mute the microphone
1Press during a call.
The handset displays»[MUTE ON].
The caller cannot hear you, but you»
can still hear his voice.
2Press again to unmute the microphone.
You can now communicate with the»
caller.
Make a second call
Note
This service is network dependent.•
EN
IFU_CD170-175_05_EN.indd 16 2009-12-17 17:30:39

17
Transfer a call
1Press INT during a call.
2Select a handset number, then press OK
toconrm.
3Press when the other side answers
your call.
The call is now transferred to the»
selected handset.
Make a conference call
A 3-way conference call is a call between you,
another handset user and the outside callers. It re-
quires two handsets to share the same base station.
During an external call
1Press INT to initiate an internal call.
The handsets available for intercom are»
displayed.
The external caller is put on hold.»
2Select a handset number, then press OK
toconrm.
The selected handset rings.»
3Press on the selected handset.
The intercom is established.»
4Press and hold INT on your handset.
You are now on a 3-way conference»
call with the external call and the
selected handset.
5Press to end the conference call.
During the conference call
1Press INT to put the external call on hold
and go back to the internal call.
The external call is put on hold.»
2Press INT to toggle between the external
and internal call.
3Press and hold INT to establish the
conference call again.
Note
If a handset hangs up during the conference•call, the other handset remains connected to
the external call.
5 Intercom and
conference calls
An intercom call is a call to another handset
that shares the same base station.A conference
call involves a conversation among you, another
handset user and the outside callers.
Make a call to another handset
Note
If the base station only has 2 registered•handsets, press INT to make a call to another
handset.
1Press INT.
The handsets available for intercom are»
displayed.
2Select a handset number, then press OK
toconrm.
The selected handset rings.»
3Press on the selected handset.
The intercom is established.»
4Press to cancel or end the intercom
call.
Note
If the selected handset is occupied in a call, you•hear a busy tone.
While you are on the phone
You can go from one handset to another
during a call:
1Press INT.
2The current caller is put on hold.
3Select a handset number, then press OK
toconrm.
Wait for the other side to answer your call.»
Toggle between calls
Press INT to switch between the outside call
and the intercom call.
English
EN
IFU_CD170-175_05_EN.indd 17 2009-12-17 17:30:39

18
Key Characters (for Greek)
0 0
1 space - 1
2ABΓ2
3ΔEZ3
4HΘ|4
5KΛM5
6NΞO6
7ΠPΣ7
8TYΦ8
9XΨΩ9
Key Characters (for Polish)
0 0
1 space - 1
2 A B C 2
3 D E F 3
4 G H I 4
5JKLŁ5
6 M N O 6
7 P Q R S 7
8 T U V 8
9WXYZ9
6 Text and
numbers
You can enter text and numbers for handset
name, phonebook records, and other menu items.
Enter text and numbers
1Press once or several times on the
alphanumeric key to enter the selected
character.
2Press BACK to delete the character.
Press / to move the cursor left and
right.
Key Characters
0 0
1 space - 1
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9WXYZ9
* ? / \ ( )
# ‘ , - . &
Key Characters (for
Norwegian/Danish)
0 0 Ø
1 space - 1
2 A Æ B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9WXYZ9
EN
IFU_CD170-175_05_EN.indd 18 2009-12-17 17:30:40

19
2Press the alphanumerical key that
corresponds to the character.
Therstrecordthatstartswiththis»
character is displayed.
Call from the phonebook
1Press or press MENU >
[PHONEBOOK] > [LIST] to access the
phonebook list.
2Select a contact in the phonebook list.
3Press to make the call.
Access the phonebook during
a call
1Press OK, select [PHONEBOOK] then
press OKagaintoconrm.
2Select the contact, then press OK to
conrm.
The number can be viewed.»
Add a record
Note
If your phonebook memory is full, the handset•
displaysanoticationmessage.Deletesome
records to add new ones.
1Press MENU
2Select [PHONEBOOK] > [NEW
ENTRY], then press OKtoconrm.
3Enter the name, then press OK to
conrm.
4Enter the number, then press OK to
conrm.
Your new record is saved.»
7 Phonebook
This phone has a phonebook that stores up to
50 records.You can access the phonebook from
the handset. Each record can have a name up
to 12 characters long and a number up to 24
digits long.
View the phonebook
Note
You can view the phonebook on one handset•only each time.
1Press or press MENU >
[PHONEBOOK] > [LIST] to access the
phonebook list.
2Select a contact and view the available
information.
Search a record
You can search the phonebook records in these
ways:
Scroll the contacts list.•
Entertherstcharacterofthecontact.•
Scroll the contact list
1Press or press MENU >
[PHONEBOOK] > [LIST] to access the
phonebook list.
2press and to scroll through the
phonebook list.
Entertherstcharacterofacontact
1Press or press MENU >
[PHONEBOOK] > [LIST] to access the
phonebook list.
English
EN
IFU_CD170-175_05_EN.indd 19 2009-12-17 17:30:40

20
Delete all records
1Press MENU.
2Select [PHONEBOOK] > [DELETE
ALL], press OKtoconrm.
Thehandsetdisplaysaconrmation»
request.
3Press OKtoconrm.
All records (except the 2 direct access»
memory records) are deleted.
Direct access memory
You have 2 direct access memories (Keys
1 and 2).To dial the saved phone number
automatically, press and hold on the keys in
standby mode.
Depending on your country, Keys 1 and 2 are
preset to [1_VOICEMAIL] (voice mail number)
and [2_INFO SVC] (information service
number) of your network operator respectively.
Edit the direct access memory
1Press MENU > [PHONEBOOK] >
[EDIT ENTRY], then press OK to
conrm.
The 2 direct access memory records»
are displayed at the top of the contact
list.
2Select a direct memory access record.
3Edit the name (except 1_ and 2_), then
press OKtoconrm.
4Edit the number, then press OK to
conrm.
Your new record is saved.»
Tip
Press and hold•to insert a pause.
Note
The phonebook only saves new number entry.•
Tip
For more information on how to edit the•numbers and name, see the section on Text
and numbers.
Edit a record
1Press MENU.
2Select [PHONEBOOK] > [EDIT
ENTRY], then press OKtoconrm.
3Select the contact, then press OK to
conrm.
4Edit the name, then press OKtoconrm.
5Edit the number, then press OK to
conrm.
The record is saved.»
Delete a record
1Press MENU.
2Select [PHONEBOOK] > [DELETE],
then press OKtoconrm.
3Select a contact, then press OK to
conrm.
Thehandsetdisplaysaconrmation»
request.
4Press OKtoconrm.
The record is deleted.»
EN
IFU_CD170-175_05_EN.indd 20 2009-12-17 17:30:40