Philips CD4502B/17 User manual

Register your product and get support at CD450
www.philips.com/welcome CD455
SE450
SE455
Listen to new messages recorded on the answering machine (for CD455/SE455)
Press oon the base station to turn on the answering machine (the LED is turned on).
The outgoing message is played.
Press pon the base station to play phone messages (the first recorded message
will be played first).
Press sto skip the current message and play the next message.
Press Rto go back to the previous message (if pressed within 1 second of current
message playback).
Press Rto replay current message (if pressed after 1 second of current message
playback).
Press -+ to adjust speaker volume during message playback.
Press fto delete the current message.
Press oagain to turn off the answering machine (the LED is turned off).
Refer to your CD455/SE455 User Manual for details about the answering machine
functions.
Connect
Install
Enjoy
1
2
3
Quick start guide
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Need help?
User Manual
See the user manual that came with your phone.
Online help
www.philips.com/support
2008 ©Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner.
Printed in China
3111 285 46431
Troubleshooting
For more information, please refer to the User Manual that came with your phone.
Problem(s) Tip(s)
• Signal icon flashing • The handset may be out of range. Move closer to the
base station.
• If the handset displays UNREGISTERED, register the
handset again.
• Handset on the
charger does not
charge
• Check that the batteries are inserted correctly.
• Make sure the handset is placed properly on the charger.
• Batteries may be defective. Purchase new ones from
your dealer.
• No display • Check that the batteries are charged.
• Check the power and phone connections.
• Handset does not ring • Check that the handset ringer is turned on.
• Caller number is not
displayed
• Service is not activated. Check your subscription with
your network provider.
• Caller does not hear
me clearly
• Move closer to the base station.
• Move the base station at least one meter away from
any electronic appliances.

Enjoy
3
Make a call
Dial the number (maximum 24 digits) and press ror v.
OR
Press ror vto take the line, and dial the phone number.
Answer a call
When the phone rings, press ror v.
End a call
To end a call, press e.
Adjust the earpiece or speaker’s volume
During a call, press uor dto adjust the volume. Press OK to confirm. The
earpiece or speakerís volume is adjusted and the phone goes back to the call screen.
Save a phonebook record
1. Press m.
2. Select PHONEBOOK > NEW ENTRY. Press OK.
3. Enter the name. Press OK.
4. Enter the number. Press OK to confirm. Your new record is saved.
Set your handset’s ring melody
1. Press m.
2. Select PERSONAL SET > HANDSET TONES > RING TONES. Press OK.
3. Scroll to the desired melody. Press OK. The setting is saved.
Access phonebook
1. Press din standby.
2. Press uor dto browse the phonebook.
3. Press >to view the details of a record.
Call from the phonebook
1. Press din standby.
2. Press uor dto select a phonebook entry.
3. Press r. The call is initiated.
What’s in the box
Handset
Base Station with bracket
Power Supply NiMH AAA
Rechargeable
Batteries x 2
Battery Door
GuaranteeUser Manual
* You may find in the box the line adaptor delivered separately from the line cord. In this
case, you have to connect the line adaptor to the line cord first before plugging the line
cord to the line socket.
In multihandset packs, you will find one or more additional handsets, battery doors,
chargers with power supply units and additional rechargeable batteries.
WARNING Always use the line cord, power supply and batteries that came with your
phone.
Quick Start Guide
Line Cord*
Answering machine base
station with bracket
Belt clip
Connect
Connect the base station
Install
Insert rechargeable batteries and charge
1
1. Place the base station in a central
location near the telephone line socket
and electricity socket.
2. Connect the output plug of the mains
adapter to the bottom of the base
station.
3. Connect the mains adapter to a
standard wall outlet.
4. Connect the telephone line cord to the phone socket at the bottom of the base
station and the wall phone socket.
2
Install batteries Charge handset for 24 hours
1. Place the 2 rechargeable batteries (included) into the battery compartment.
2. Slide the battery door firmly into place.
2 4
A B

Enjoy
3
Make a call
Dial the number (maximum 24 digits) and press ror v.
OR
Press ror vto take the line, and dial the phone number.
Answer a call
When the phone rings, press ror v.
End a call
To end a call, press e.
Adjust the earpiece or speaker’s volume
During a call, press uor dto adjust the volume. Press OK to confirm. The
earpiece or speakerís volume is adjusted and the phone goes back to the call screen.
Save a phonebook record
1. Press m.
2. Select PHONEBOOK > NEW ENTRY. Press OK.
3. Enter the name. Press OK.
4. Enter the number. Press OK to confirm. Your new record is saved.
Set your handset’s ring melody
1. Press m.
2. Select PERSONAL SET > HANDSET TONES > RING TONES. Press OK.
3. Scroll to the desired melody. Press OK. The setting is saved.
Access phonebook
1. Press din standby.
2. Press uor dto browse the phonebook.
3. Press >to view the details of a record.
Call from the phonebook
1. Press din standby.
2. Press uor dto select a phonebook entry.
3. Press r. The call is initiated.
What’s in the box
Handset
Base Station with bracket
Power Supply NiMH AAA
Rechargeable
Batteries x 2
Battery Door
GuaranteeUser Manual
* You may find in the box the line adaptor delivered separately from the line cord. In this
case, you have to connect the line adaptor to the line cord first before plugging the line
cord to the line socket.
In multihandset packs, you will find one or more additional handsets, battery doors,
chargers with power supply units and additional rechargeable batteries.
WARNING Always use the line cord, power supply and batteries that came with your
phone.
Quick Start Guide
Line Cord*
Answering machine base
station with bracket
Belt clip
Connect
Connect the base station
Install
Insert rechargeable batteries and charge
1
1. Place the base station in a central
location near the telephone line socket
and electricity socket.
2. Connect the output plug of the mains
adapter to the bottom of the base
station.
3. Connect the mains adapter to a
standard wall outlet.
4. Connect the telephone line cord to the phone socket at the bottom of the base
station and the wall phone socket.
2
Install batteries Charge handset for 24 hours
1. Place the 2 rechargeable batteries (included) into the battery compartment.
2. Slide the battery door firmly into place.
2 4
A B

Enjoy
3
Make a call
Dial the number (maximum 24 digits) and press ror v.
OR
Press ror vto take the line, and dial the phone number.
Answer a call
When the phone rings, press ror v.
End a call
To end a call, press e.
Adjust the earpiece or speaker’s volume
During a call, press uor dto adjust the volume. Press OK to confirm. The
earpiece or speakerís volume is adjusted and the phone goes back to the call screen.
Save a phonebook record
1. Press m.
2. Select PHONEBOOK > NEW ENTRY. Press OK.
3. Enter the name. Press OK.
4. Enter the number. Press OK to confirm. Your new record is saved.
Set your handset’s ring melody
1. Press m.
2. Select PERSONAL SET > HANDSET TONES > RING TONES. Press OK.
3. Scroll to the desired melody. Press OK. The setting is saved.
Access phonebook
1. Press din standby.
2. Press uor dto browse the phonebook.
3. Press >to view the details of a record.
Call from the phonebook
1. Press din standby.
2. Press uor dto select a phonebook entry.
3. Press r. The call is initiated.
What’s in the box
Handset
Base Station with bracket
Power Supply NiMH AAA
Rechargeable
Batteries x 2
Battery Door
GuaranteeUser Manual
* You may find in the box the line adaptor delivered separately from the line cord. In this
case, you have to connect the line adaptor to the line cord first before plugging the line
cord to the line socket.
In multihandset packs, you will find one or more additional handsets, battery doors,
chargers with power supply units and additional rechargeable batteries.
WARNING Always use the line cord, power supply and batteries that came with your
phone.
Quick Start Guide
Line Cord*
Answering machine base
station with bracket
Belt clip
Connect
Connect the base station
Install
Insert rechargeable batteries and charge
1
1. Place the base station in a central
location near the telephone line socket
and electricity socket.
2. Connect the output plug of the mains
adapter to the bottom of the base
station.
3. Connect the mains adapter to a
standard wall outlet.
4. Connect the telephone line cord to the phone socket at the bottom of the base
station and the wall phone socket.
2
Install batteries Charge handset for 24 hours
1. Place the 2 rechargeable batteries (included) into the battery compartment.
2. Slide the battery door firmly into place.
2 4
A B

Register your product and get support at CD450
www.philips.com/welcome CD455
SE450
SE455
Listen to new messages recorded on the answering machine (for CD455/SE455)
Press oon the base station to turn on the answering machine (the LED is turned on).
The outgoing message is played.
Press pon the base station to play phone messages (the first recorded message
will be played first).
Press sto skip the current message and play the next message.
Press Rto go back to the previous message (if pressed within 1 second of current
message playback).
Press Rto replay current message (if pressed after 1 second of current message
playback).
Press -+ to adjust speaker volume during message playback.
Press fto delete the current message.
Press oagain to turn off the answering machine (the LED is turned off).
Refer to your CD455/SE455 User Manual for details about the answering machine
functions.
Connect
Install
Enjoy
1
2
3
Quick start guide
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Need help?
User Manual
See the user manual that came with your phone.
Online help
www.philips.com/support
2008 ©Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner.
Printed in China
3111 285 46431
Troubleshooting
For more information, please refer to the User Manual that came with your phone.
Problem(s) Tip(s)
• Signal icon flashing • The handset may be out of range. Move closer to the
base station.
• If the handset displays UNREGISTERED, register the
handset again.
• Handset on the
charger does not
charge
• Check that the batteries are inserted correctly.
• Make sure the handset is placed properly on the charger.
• Batteries may be defective. Purchase new ones from
your dealer.
• No display • Check that the batteries are charged.
• Check the power and phone connections.
• Handset does not ring • Check that the handset ringer is turned on.
• Caller number is not
displayed
• Service is not activated. Check your subscription with
your network provider.
• Caller does not hear
me clearly
• Move closer to the base station.
• Move the base station at least one meter away from
any electronic appliances.

Register your product and get support at CD450
www.philips.com/welcome CD455
SE450
SE455
Listen to new messages recorded on the answering machine (for CD455/SE455)
Press oon the base station to turn on the answering machine (the LED is turned on).
The outgoing message is played.
Press pon the base station to play phone messages (the first recorded message
will be played first).
Press sto skip the current message and play the next message.
Press Rto go back to the previous message (if pressed within 1 second of current
message playback).
Press Rto replay current message (if pressed after 1 second of current message
playback).
Press -+ to adjust speaker volume during message playback.
Press fto delete the current message.
Press oagain to turn off the answering machine (the LED is turned off).
Refer to your CD455/SE455 User Manual for details about the answering machine
functions.
Connect
Install
Enjoy
1
2
3
Quick start guide
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Need help?
User Manual
See the user manual that came with your phone.
Online help
www.philips.com/support
2008 ©Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner.
Printed in China
3111 285 46431
Troubleshooting
For more information, please refer to the User Manual that came with your phone.
Problem(s) Tip(s)
• Signal icon flashing • The handset may be out of range. Move closer to the
base station.
• If the handset displays UNREGISTERED, register the
handset again.
• Handset on the
charger does not
charge
• Check that the batteries are inserted correctly.
• Make sure the handset is placed properly on the charger.
• Batteries may be defective. Purchase new ones from
your dealer.
• No display • Check that the batteries are charged.
• Check the power and phone connections.
• Handset does not ring • Check that the handset ringer is turned on.
• Caller number is not
displayed
• Service is not activated. Check your subscription with
your network provider.
• Caller does not hear
me clearly
• Move closer to the base station.
• Move the base station at least one meter away from
any electronic appliances.