Philips M775 Operator's manual

Extended user
documentation
Hier können Sie Ihr Produkt registrieren und Unterstützung erhalten:
www.philips.com/support
Extended user
documentation
Register your product and get support at
www.philips.com/support
Design cordless
phone (M770)
Design cordless
phone with answering
machine (M775)
Faro

1EN
Contents
Contents
1 Important safety instructions 3
2 Your phone 4
What is in the box 4
Overview of the phone 4
Overview of the base station 6
3 Get started 7
Connect the base station 7
Install the handset 8
Congure your phone (country
dependent) 8
Change the remote access PIN
code (for M775) 9
Charge the handset 9
Check the battery level 10
What is standby mode? 10
Display icons 10
Check the signal strength 11
Switch the handset on or o 11
4 Calls 12
Make a call 12
Answer a call 12
End a call 13
Adjust the earpiece/speaker
volume 13
Mute the microphone 13
Turn the speaker on or o 13
Make a second call 13
Answer a second call 13
Switch between two calls 14
Make a conference call with
the external callers 14
5 Intercom and conference
calls 15
Make a call to another handset 15
Make a conference call 15
6 Text and numbers 17
Enter text and numbers 17
Switch between uppercase
and lowercase 17
7 Phonebook 18
View the phonebook 18
Search a record 18
Call from the phonebook 18
Access the phonebook during
a call 19
Add a record 19
Edit a record 19
Delete a record 19
Delete all records 19
8 Call log 20
Call list type 20
View the call records 20
Save a call record to the
phonebook 21
Return a call 21
Delete a call record 21
Delete all call records 21
9 Redial list 22
View the redial records 22
Save a redial record to the
phonebook 22
Redial a call 22
Access the redial list during a
call 22
Delete a redial record 22
Delete all redial records 22

2EN
10 Sound settings 23
Set the handset's ringtone
volume 23
Set the handset's ringtone 23
Set the key tone 23
Set the docking tone 23
Set the battery tone 23
Set the sound prole 23
11 Phone settings 25
Display settings 25
Eco mode 25
ECO+ mode 26
Name the handset 26
Set the date and time 26
Set the display language 26
Auto answer 27
Activate/Deactivate auto hang
up 27
12 Alarm clock 28
Set the alarm 28
Turn o the alarm 28
13 Telephone answering
machine 29
Turn the answering machine
on or o 29
Family notes 29
Set the answering machine
language 29
Announcements 29
Incoming messages 30
Call screening 31
Set the ring delay 31
Remote access 32
14 Privacy mode 34
Call barring (block outgoing
calls) 34
Block incoming calls 34
Silent mode 35
Change the privacy mode PIN/
passcord 36
15 Services 37
Call list type 37
Auto conference 37
Network type 37
Auto prex 37
Select the recall duration 38
Dial mode 38
Auto clock 38
Register the handset or
additional handsets 39
Unregister handsets 39
Restore default settings 40
16 Technical data 41
17 Notice 42
Declaration of conformity 42
Use GAP standard compliance 42
Compliance with EMF 42
Disposal of your old product
and battery 42
18 Frequently asked questions 44
19 Appendix 47
Text and number input tables 47

3EN
1 Important
safety
instructions
Power requirements
• This product requires an electrical
supply of 100-240 volts AC.
In case of power failure, the
communication can be lost.
• The voltage on the network
is classied as TNV-3
(Telecommunication Network
Voltages), as dened in the
standard EN 60950.
Warning
• The Electrical network is classied as
hazardous. The only way to power down
the charger is to unplug the power supply
from the electrical outlet. Ensure that the
electrical outlet is always easily accessible.
To avoid damage or malfunction
Caution
• Use only the power supply listed in the user
instructions.
• Use only the batteries listed in the user
instructions.
• Risk of explosion if battery is replaced by an
incorrect type.
• Dispose of used batteries according to the
instructions.
• Do not dispose of batteries in re.
• Always use the cables provided with the
product.
• Do not allow the charging contacts or the
battery to come into contact with metal
objects.
• Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage the
product.
• Metallic objects may be retained if placed
near or on the handset receiver.
• Do not use the product in places where
there are explosive hazards.
• Do not open the handset, base station or
charger as you could be exposed to high
voltages.
• For pluggable equipment, the socket-outlet
shall be installed near the equipment and
shall be easily accessible.
• Handsfree activation could suddenly
increase the volume in the earpiece to a very
high level: make sure the handset is not too
close to your ear.
• This equipment is not designed to make
emergency calls when the power fails. An
alternative has to be made available to allow
emergency calls.
• Do not allow the product to come into
contact with liquids.
• Do not use any cleaning agents containing
alcohol, ammonia, benzene, or abrasives as
these may harm the set.
• Do not expose the phone to excessive heat
caused by heating equipment or direct
sunlight.
• Do not drop your phone or allow objects to
fall on your phone.
• Active mobile phones in the vicinity may
cause interference.
About operating and storage
temperatures
• Operate in a place where
temperature is always between
0°C to +40°C (up to 90% relative
humidity).
• Store in a place where
temperature is always between
-20°C and +45°C (up to 95%
relative humidity).
• Battery life may be shorter in low
temperature conditions.

4EN
2 Your phone
Congratulations on your purchase and
welcome to Philips!
To fully benet from the support that
Philips oers, register your product at
www.philips.com/welcome.
What is in the box
Handset
Base station
Power adapter
Line cord*
Guarantee
Short user manual
Note
• * In some countries, you have to connect the
line adapter to the line cord, then plug the
line cord to the telephone socket.
Overview of the phone
1
2
3
4
5
6
7
8
9
10
17
16
15
14
13
12
11
18
a Loudspeaker
b Earpiece
4XLFNVWDUWJXLGH

5EN
c
• Scroll up on the menu.
• Increase the earpiece/speaker
volume.
• Access the phonebook in
standby mode.
d
• Press to delete individual text
or digit. Press and hold to
remove all text.
• Cancel operation.
• Access the redial list in standby
mode.
• Change the sound prole
during a call.
• Select the function displayed
on the handset screen directly
above the key.
e
Move the cursor to the right in
editing mode.
f
• End the call.
• Exit the menu/operation.
• Press and hold to power on/o
the handset.
g
• Scroll down on the menu.
• Decrease the earpiece/speaker
volume.
• Access the call log in standby
mode.
h
• Press to enter a space during
text editing.
• Press and hold to lock/unlock
the keypad in standby mode.
i
• Press and hold to enter a pause
when when making a call.
• Switch to upper/lower case
during editing.
j (for M770) or / (for M775)
• Mute or unmute the
microphone.
• Access to the answer machine
menu in standby mode (for
M775 only).
• Listen to new messages from
the answering machine (for
M775 only).
k Microphone
l
• Turn the speaker phone on/o.
• Make and receive calls through
the speaker.
m
• Press and hold to make an
intercom call (for multi-handset
version only).
• Set the dial mode (pulse mode
or temporary tone mode).
n
• Make and receive calls.
• Recall key (This function is
network dependent.)
o
Move the cursor to the left in
editing mode.
p OK
• Access the main menu in
standby mode.
• press and hold to access the
main menu when there is a new
missed call/new message/new
voice mail.
• Conrm selection.
• Enter the options menu
q
• Access the main menu in
standby mode.
• Press and hold to access the
main menu when there is a new

6EN
missed call/new message/new
voice mail.
• Conrm selection.
• Enter the options menu
• Select the function displayed
on the handset screen directly
above the key.
r Battery sleeve
Overview of the base
station
1
2
3
4
5
a
• Turn the speaker on/o (when
the pre-registered handset is
on the base station).
• Make and receive calls through
the speaker (when the handset
is on the base station).
12
b
Press to snooze the alarm (when
the pre-registered handset is on
the base station).
c LED indicator
• O: no new event.
• On: in a call.
• Flashing: new missed
calls/new messages on
answering machine/new voice
mails.
d LCD display
• The caller's name and number
are displayed alternately when
there is an incoming call (This
feature is available only if you
have registered to the caller
ID service with your service
provider).
• The time is displayed in
standby mode.
e
• Press to nd handsets.
• Press and hold to enter the
registration mode.

7EN
3 Get started
Caution
• Make sure that you have read the safety
instructions in the 'Important safety
instructions' section before you connect and
install your handset.
Connect the base
station
Warning
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the phone.
• Use only the supplied power adapter to
charge the batteries.
Note
• If you subscribe to the digital subscriber line
(DSL) high speed internet service through
your telephone line, ensure you install a DSL
lter between the telephone line cord and
the power socket. The lter prevents noise
and caller ID problems caused by the DSL
interference. For more information on the
DSL lters, contact your DSL service provider.
• The type plate is located on the bottom of
the base station.
1 Connect each end of the power
adapter to:
• the DC input jack at the bottom
of the base station;
• the power socket on the wall.
2 Connect each end of the line cord
to:
• the telephone socket at the
bottom of the base station;
• the telephone socket on the
wall.

8EN
Install the handset
The batteries are pre-installed in the
handset. Pull the battery tape o from
the battery door before charging.
Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or re. Never discard batteries
in re.
• Use only the supplied batteries.
• Risk of decreased battery life! Never mix
dierent brands or types of batteries.
Note
• Charge the batteries for 8 hours before rst
use.
• If the handset becomes warm when the
batteries are being charged, it is normal.
Warning
• When replacing the batteries, check the
battery polarity. Incorrect polarity may
damage the product.
Congure your phone
(country dependent)
1 When using your phone for the rst
time, you see a welcome message.
2 Press [OK].
Set the country/language
Select your country/language, then
press [OK] to conrm.
» The country/language setting is
saved.
Note
• The country/language setting option is
country dependent. If no welcome message
is displayed, it means the country/language
setting is preset for your country. Then you
can set the date and time.
To reset the language, see the
following steps.
1 Select [Phone setup] > [Language],
then press [OK] to conrm.
2 Select a language, then press [OK]
to conrm.
» The setting is saved.

9EN
Set the date and time
1 Select [Menu] > [Phone setup] >
[Date & time], then press [OK] to
conrm.
2 Press the numeric buttons to
enter the date, then press [OK] to
conrm.
» The time setting menu is
displayed on the handset.
3 Press the numeric buttons to enter
the time.
• If the time is in 12-hour format,
press / to select [am] or [pm]
(Country dependent).
4 Press [OK] to conrm.
Note
• The base clock is automatically synchronized
with the handset clock.
Change the remote
access PIN code (for
M775)
Note
• This feature is available only for models with
answering machine.
• The default answering machine remote
access PIN code is 0000 and it is important
to change it to ensure the security.
1 Press / or [Menu] > [Answer
machine] > [Remote access] >
[Change PIN], then press [OK] to
conrm.
2 Enter the old PIN, then press [OK]
to conrm.
3 Enter the new PIN code, then
press [OK] to conrm.
4 Enter the new PIN code again,
then press [Save] to conrm.
» The setting is saved.
Charge the handset
Charge your handset by docking it in
either direction. When the handset is

10 EN
placed correctly on the base station,
you hear a docking tone.
» The handset starts charging.
Note
• Charge the batteries for 8 hours before rst
use.
• If the handset becomes warm when the
batteries are being charged, it is normal.
• Over time, capacity of batteries decreases.
This is a normal battery behavior.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current
battery level.
When the handset is o
the base station, the bars
indicate the battery level
(full, medium and low).
When the handset is on the
base station/charger, the
bars ash until charging is
complete.
The empty battery icon
ashes. The battery is low
and needs recharging.
The handset LCD backlight turns o if
the battery level is low. The handset
turns o if the batteries are empty.
If you are on the phone, you hear
warning tones when the batteries
are almost empty. The call gets
disconnected after the warning.
What is standby mode?
Your phone is in standby mode when
it is idle. The handset name, date
and time, and handset number are
displayed on the handset screen.
When the handset is on the base
station, the clock screensaver will
be displayed after a while if there is
no event like missed calls or voice
message.
Display icons
In standby mode, the icons shown on
the main screen tell you what features
are available on your handset.
Icon Descriptions
When the handset is o the
base station/charger, the
bars indicate the battery
level (from full to low).
When the handset is on
the base station/charger,
the bars keep scrolling until
charging is complete.
The empty battery icon
ashes and you hear an alert
tone.
The battery is low and needs
recharging.
It shows the connection
status between the handset
and base station. The more
bars are shown, the better
the signal strength is.
It remains steadily on when
browsing incoming calls in
the call log.
It remains steadily on when
browsing outgoing calls in
the redial list.

11EN
It ashes when there is a
new missed call or when
browsing unread missed
calls in call log.
It remains steady on when
browsing the read missed
calls in call log.
It remains steadily on when
browsing blocked calls in call
log.
It ashes when receiving
incoming call.
It remains steadily on when
you are in a call.
The speaker is on.
The ringer is o.
The silent mode is set and
within active period
(the phone does not ring).
Answering machine (M775
only): it ashes when there is
a new message or when the
memory is full. It is displayed
when the telephone
answering machine is turned
on.
Press and hold to access
the network voice mail
(network and country
dependent).
It ashes when there is a
new voice message.
It remains steadily on when
the voice messages are
already viewed in the call
log.
The icon is not shown when
there is no voice message.
The silent mode is set, but is
outside of active period.
/ The alarm is activated. The
icon is displayed on the
screen of the pre-registered
handset and base station.
/ It is displayed when you
adjust the volume.
ECO The Eco mode is activated.
ECO+ The ECO+ mode is activated.
HAC It enables the phone to
couple with the hearing
aid device to amplify the
sound and reduce noise
interference.
Check the signal
strength
The number of bars
indicates the connection
status between the handset
and base station. The more
bars are shown, the better
the connection is.
• Make sure the handset is
connected to the base station
before you make or receive calls
and carry out the phone functions
and features.
• If you hear warning tones when
you are on the phone, the handset
is almost out of battery or the
handset is out of range. Charge
the battery or move the handset
nearer to the base station.
Note
• When ECO+ is on, the signal strength is not
displayed.
Switch the handset on
or o
Press and hold to switch the
handset on or o.

12 EN
4 Calls
Note
• When the power fails, the phone cannot
access emergency services.
Tip
• Check the signal strength before you make a
call or when you are in a call (see ‘Check the
signal strength’ on page 11).
Make a call
You can make a call in these ways:
• Normal call.
• Predial call.
You can also make a call from the
redial list (see ‘Redial a call’ on page
22), phonebook list (see ‘Call from
the phonebook’ on page 18) and
call log (see ‘Return a call’ on page
21).
Normal call
1 Press or .
2 Dial the phone number.
» The number is dialed out.
» The duration of your current
call is displayed.
Predial call
1 Dial the phone number
• To erase a digit, press [Clear].
• To enter a pause, press and
hold .
2 Press or to dial out the call.
Note
• The talk time of your current call is displayed
on the call timer.
• If you hear warning tones, the phone is
almost out of battery or out of range. Charge
the battery or move the phone close to the
base station.
Answer a call
When the phone rings, you can select
from the following options:
• press or to answer the call.
• pick up the phone to answer the
call when you activate the auto
answer feature (see ‘Auto answer’
on page 27).
• select [Silent] to temporarily
turn o the ringer of the current
incoming call.
Warning
• When the handset rings or when the
handsfree is activated, keep the handset
away from your ear to avoid ear damage.
Note
• The caller ID service is available if you have
registered to the caller ID service with your
service provider.
Tip
• When there is a missed call, a notication
message appears.

13EN
End a call
You can end a call in these ways:
• Press ;
• Place the handset to the base
station or charging cradle.
Note
• Placing the handset to the base station or
charging cradle does not end the call when
the auto hangup feature is turned o (see
‘Activate/Deactivate auto hang up’ on page
27).
Adjust the
earpiece/speaker
volume
Press / to adjust the volume during
a call.
» The earpiece/speaker volume is
adjusted and the phone is back
to the call screen.
Mute the microphone
1 Press during a call.
» The handset displays [Mute
on].
» The caller cannot hear you, but
you can still hear his voice.
2 Press again to unmute the
microphone.
» You can now communicate with
the caller.
Turn the speaker on or
o
Press on the handset or base
station.
Make a second call
Note
• This service is network dependent.
1 Press during a call.
» The rst call is put on hold.
2 Dial the second number.
» The number displayed on the
screen is dialed out.
Answer a second call
Note
• This service is network dependent.
When there is a periodical beep to
notify you of an incoming call, you can
answer the call in these ways:
1 Press and to answer the call.
» The rst call is put on hold, and
you are now connected to the
second call.
2 Press and to end the current
call and answer the rst call.

14 EN
Switch between two
calls
Note
• This service is network dependent. Check
with your network provider for operation.
Press and .
» The current call is put on hold,
and you are now connected to
the other.
Make a conference call
with the external callers
Note
• This service is network and country
dependent. Check with the service provider
for operation and additional charges.
When you are connected to two calls,
press , then .
» The two calls are combined
and a conference call is
established.

15EN
5 Intercom and
conference
calls
Note
• This feature is available for multi- handset
versions only.
An intercom call is a call to another
handset that shares the same base
station. A conference call involves a
conversation between you, another
handset user and the outside callers.
Make a call to another
handset
Note
• If the base station only has 2 registered
handsets, press and hold to make a call
to another handset.
1 Press and hold .
» The handsets available for
intercom are displayed.
2 Select a handset, then press [OK]
to conrm.
» The selected handset rings.
3 Press on the selected handset.
» The intercom is established.
4 Press [Cancel] or to cancel or
end the intercom call.
Note
• If the selected handset is busy, [Busy] is
displayed on the handset screen.
While you are on the phone
You can go from one handset to
another during a call:
1 Press and hold .
» The current caller is put on
hold.
» For multi-handset versions, the
handsets available for intercom
are displayed, then go to step
2.
2 Select a handset, then press [OK]
to conrm.
» Wait for the other side to
answer your call.
Switch between calls
Press to switch between the
outside call and the intercom call.
Make a conference call
A 3-way conference call is between
you, another handset user and
the outside callers. It requires two
handsets to share the same base
station.
During an external call
1 Press and hold to initiate an
internal call.
» The external caller is put on
hold.
» For multi-handset versions,
The handsets available for

16 EN
intercom are displayed. Then
go to step 2.
» For two-handset versions, the
other handset rings. Then go to
step 3.
2 Select a handset, then press [OK]
to conrm.
» The selected handset rings.
3 Press on the selected handset.
» The intercom is established.
4 Press [Conf].
» You are now in a 3-way
conference call with an external
call and a selected handset.
5 Press to end the conference
call.
Note
• Press to join an ongoing conference with
another handset if [Services] > [Conference]
is set to [Auto].
During the conference call
1 Press [Int.] to put the external
call on hold and go back to the
internal call.
» The external call is put on hold.
2 Press [Conf] to establish the
conference call again.
Note
• If a handset hangs up during the conference
call, the other handset remains connected to
the external call.

17EN
6 Text and
numbers
You can enter text and numbers for
handset name, phonebook records,
and other menu items.
Enter text and numbers
1 Press once or several times on
the alphanumeric key to enter the
selected character.
2 Press [Clear] to delete a character.
Press and hold [Clear] to delete all
characters. Press / to move the
cursor left and right.
3 Press to add a space.
Note
• For information on key mapping of
characters and numbers, see the chapter
'Appendix'.
Switch between
uppercase and
lowercase
By default, the rst letter of each word
in a sentence is uppercase and the
rest is lowercase. Press and hold to
switch between the uppercase and
lowercase letters.

18 EN
7 Phonebook
This phone has a phonebook that
stores up to 100 records. You can
access the phonebook from the
handset. Each record can have a name
up to 16 characters long. It can store
up to 3 numbers, with each number up
to 24 digits long.
You have up to 2 direct access
memories (Keys 1 and 2). Depending
on your country, keys 1 and 2 are
preset to the voice mail number and
information service number of your
service provider respectively. When
you press and hold on the key in
standby mode, the saved phone
number is dialed automatically.
Note
• The availability of direct access memory is
country dependent.
View the phonebook
Note
• You can view the phonebook on one
handset only each time.
1 Press or select [Menu] >
[Phonebook] > [View] > [OK] to
access the phonebook list.
2 Select a contact and view the
available information.
Search a record
You can search the phonebook
records in these ways:
• Scroll the contacts list.
• Enter the rst character of the
contact.
Scroll the contact list
1 Press or select [Menu] >
[Phonebook] > [View] > [OK] to
access the phonebook list.
2 Press and to scroll through the
phonebook list.
Enter the rst character of a
contact
1 Press or select [Menu] >
[Phonebook] > [View] > [OK] to
access the phonebook list.
2 Press the alphanumerical key that
matches the character.
» The rst record that starts with
this character is displayed.
Call from the
phonebook
1 Press or select [Menu] >
[Phonebook] > [View] > [OK] to
access the phonebook list.
2 Select a contact in the phonebook
list.
3 Press [View].
4 Select a type of number
(mobile/home/oce), press to
make the call.