Philips SE4354S/05 User manual

1
EN
Welcome
Quick start guide
1
2
3
Connect
Install
Enjoy

2
What’s in the box
Handset Base station Power supply for
base station
2 AAA rechargeable
batteries
Battery door
Line cord
Quick Start Guide Warranty card
User Guide
The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor
to the line cord first before plugging the line cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power supply units
and additional rechargeable batteries.
WARNING Always use the cables and batteries that came with your phone.

3
EN
1. Place the base station in a central location near the telephone line socket and electricity sockets.
2. Connect the line cord and the power cable to the proper connector at the back of the base station.
3. Connect the other end of the line cord to the telephone line socket and the other end of the power
cable to the electricity socket.
Connect
the power
supply
Connect
the power
supply
BA
1.
2.
Connect the line
cord to the
line socket B
A
A
1Connect
Connect the base station
Set date and time
1. Press m.
2. Scroll :to Clock & Alarm and press OK.
3. Press OK to select Set Date/Time.
4. Enter current time (HH:MM) and current date (DD/MM/YY) and press OK.
Now, you are ready to use your phone.
Insert batteries Charge handset for 24 hours
2Install
Insert batteries and charge

4
3Enjoy
Make a call
Enter the phone number and press r.
OR
Press rand enter the phone number.
Answer a call
When the phone rings, press rkey.
End a call
Press ekey.
Adjust earpiece volume during a call
Press :to select from Volume 1 to Volume 5.
Store a contact in the phonebook
1. Press m, scroll :to Phonebook and press OK, press OK again to select New Entry.
2. Enter the name of the contact (maximum 12 characters) and press OK.
3. Enter the number (maximum 24 digits) and press OK.
4. Enter the SMS box number and press OK (only for UK).
(The default SMS Box is 9. To modify, press BACK and then enter the number (0 to 9).)
5. Scroll : to a group (<No Group>, <Group A>, <Group B>, <Group C>) and press OK to
confirm.
A long confirmation beep tone is emitted.
Access the phonebook
1. Press din standby mode or press m, scroll : to Phonebook and press OK, scroll :to
List Entry and press OK.
2. Press :to browse the phonebook.
Set the ring melody
1. Press m, scroll :to Personal Set and press OK, press OK to select Handset Tones, scroll :
to Ring Melody and press OK.
2. Scroll : to your desired melody to play the melody.
3. Press OK to set your ring melody.
A confirmation beep is emitted and the screen returns to previous menu.

5
EN
Press To
mEnter the main menu from stand-by mode.
Select the function displayed on the handset screen directly above it.
>Go to redial list from stand-by mode.
Select the function displayed on the handset screen directly above it.
Activate mute function during a call.
rAnswer an incoming external or internal call.
Insert R for operator services when on the line.
eHang up a call.
Long press from menu browing to return to stand-by mode, short press to return to
previous menu.
Long press in stand-by mode to switch off the handset, short press to switch on the
handset again.
u Access call log from stand-by mode.
Scroll up a menu list or go to the previous phonebook or call log record.
Increase earpiece volume during a call.
Go to the previous character in editing mode.
d Access phonebook from stand-by mode.
Scroll down a menu list or go to the next phonebook or call log record.
Decrease earpiece volume during a call.
Go to the next character in editing mode.
cInitiate an internal call.
vAnswer an incoming call in handsfree mode.
Activate and deactivate the loudspeaker during a call.
#Dial # in stand-by mode.
Long press to mute the ringer in stand-by mode.
Insert a pause in dialling mode.
Switch between upper and lower case in editing mode.
*Dial * in stand-by mode.
Long press to activate and deactivate keypad lock.
Switch the handset On/Off
Press and hold ekey for 5 seconds to switch off the handset in stand-by mode.
Short press ekey to switch on the handset again.
Keypad lock/unlock
Press and hold *key for 2 seconds to lock and unlock keypad in stand-by mode.
Paging
1. Press ckey on the base until the handset starts to ring.
2. Once the handset is retrieved, press eto end the paging.

6
3111 265 27381
Troubleshooting
For more information, please refer to p.48 of SE430 user manual and p.56 of SE435 user manual.
Need help?
User Manual
Refer to the User Manual that is supplied with your SE430/435.
Online help
www.p4c.philips.com
Problem Solution
• No dialling tone • Check the connections
• Charge the batteries for at least 24 hours
• Use the line cable provided
• Poor audio quality • Move closer to the base station
• Move the base station at least one metre away from
any electrical appliances
• The icon is blinking • Register the handset to the base station
• Move closer to the base station
• Caller Line Identification
(CLI) service does not work
• Check your subscription with your network operator
ΣΕ430_ΣΕ435_ΘΣΓ_ΕΝ.φµ Παγε 6 Τηυρσδαψ, Φεβρυαρψ 16, 2006 3:39 ΠΜ