Philips 10FF2 Series Installation and operation manual

EN User manuals 1
PhotoFrame
10FF2 Series
7FF2 Series
5FF2 Series
Register your product and get support at
www.philips.com/welcome

ENGLISH
1
Content
Content
1. Important
1.1 Safety precautions and maintenance
1.2 Care of the PhotoFrame
1.3 Recycling
2. Your PhotoFrame
2.1 Product Overview
2.1.1 What’s in the box
2.1.2 Control Buttons
2.1.3 Connections
2.2 Product highlights
3. Getting started
3.1 Placing the product
3.2 Connecting to the mains
3.3 Charging the batteries
3.4 Turning on your PhotoFrame
3.5 Initial Setup
3.5.1 Access the Main Menu
3.5.2 Selecting your preferred language
3.5.3 Set Time, Date and Clock
3.5.4 Choosing clock mode
4. Using your PhotoFrame
4.1 View Photos
4.1.1 View pre-stored photos
4.1.2 View photos from a Memory Card
4.1.3 View photos from a USB device
4.2 Find a Photo
4.2.1 Browse Mode
4.2.2 Slide Show Mode
4.2.3 Thumbnail Access and Navigation
4.2.4 Quick access to thumbnails
4.2.5 Photo selection
4.3 View a slideshow or Album
4.3.1 Play All albums or selected slideshow
4.4 Copy Photos
4.4.1 Copy from a Memory Card
4.4.2 Copy from a PC/MAC
4.4.3 Copy from a Photoframe to a PC/MAC
4.5 Delete Photos
5. Use more of your PhotoFrame
5.1 Menu Navigation
5.2 Photo Menu
5.2.1 Rotate, Zoom and Crop
5.2.2 Move Photos
5.2.3 Photo Effects
5.2.4 Frames
5.3 Create and manage Photo Albums
5.3.1 Create an Album
5.3.2 Rename an Album
5.3.3 Delete an Album
5.3.4 Copy Photos between Albums
5.4 Create and Manage Slideshows
5.4.1 Create a Slideshow
5.4.2 Add Album to Slideshow
5.4.3 Remove Album from slideshow
5.4.4 Rename a slideshow
5.4.5 Delete a slideshow
5.4.6 Slideshow Sequence
5.4.7 Transition Effects
5.4.8 Frequency
5.4.9 Collage
5.4.10 Background Color
5.4.11 Show Clock
5.5 Event Reminder
5.5.1 Create an Event Reminder
5.5.2 Delete an Event Reminder
5.5.3 Event Reminder Snooze
5.6 Check the status of your photoframe
6. Settings
6.1 Brightness
6.2 Language
6.3 Memory Card
6.4 Time, Date and Clock
6.5 Timer function (Auto On/Off)
6.6 Rotate Function
6.7 Beep On/Off
7. Technical data
8. Frequently asked questions
9. Service and Warranty
3
3
3
4
5
5
5
6
6
7
8
8
8
8
8
8
8
8
9
10
11
11
11
11
11
11
11
11
12
12
13
14
14
14
15
16
17
17
19
19
19
19
21
22
23
24
24
25
26
27
27
27
28
29
30
31
32
33
33
34
35
36
37
37
39
40
40
42
42
42
43
44
45
47
48
49
51
53

2Content

1.1 Safety precautions and
maintenance
Read and follow these instructions when
connecting and using your PhotoFrame:
• To protect your display from possible damage,
do not put excessive pressure on the LCD
panel.When moving your PhotoFrame, grasp
the frame to lift; do not lift the it by placing
your hand or fingers on the LCD panel.
• Unplug the PhotoFrame if you are not going
to use it for an extensive period of time.
• Unplug the PhotoFrame if you need to clean
it with a slightly damp cloth.The screen may
be wiped with a dry cloth when the power is
off. However, never use alcohol, solvents or
ammonia-based liquids.
• Consult a service technician if the
PhotoFrame does not operate normally when
you have followed the instructions in this
manual.
• The casing cover should be opened only by
qualified service personnel.
• Keep the PhotoFrame out of direct sunlight
and away from stoves or any other heat
source.
• Keep the PhotoFrame dry.To avoid electric
shock, do not expose it to rain or excessive
moisture.
Introduction
Philips digital PhotoFrame can be placed either
vertically or horizontally to fit the photos on
display. Its internal rechargeable battery provides
you with the freedom to pass it around and
show photos without the power cord. Or,
you can place it somewhere in a room for a
continuous display by connecting it to the mains
power supply.
1. Important
• When positioning the PhotoFrame, make sure
the power plug and outlet are easily
accessible.
• To avoid the risk of shock or permanent
damage to the set, do not expose the
PhotoFrame to rain or excessive moisture.
1.2 Care of the PhotoFrame
1Do not drop
PhotoFrame is a complicated electronic
device and cannot withstand shock from
being dropped.
2Do not expose to moisture
PhotoFrame is neither moisture proof nor
moisture resistant. Exposing it to moisture
or liquid of any kind will very likely damage
your PhotoFrame.
3Do not hit or scratch
The LCD panel of PhotoFrame is made of
glass and is therefore sensitive to abnormal
force and sharp edges.
4Screen cleaning
Use only a dry soft cloth to clean your
screen.
3
Important
ENGLISH

5Battery charging
For first time use, fully charge your
PhotoFrame (Battery LED will be off when
battery is fully charged).This process may
take up to 3 hours or more. PhotoFrame
starts fully recharging its internal battery
only when the battery level is below
certain value.This is designed to extend
your PhotoFrame battery life by reducing
unnecessary battery charging.
Note:
Only the 7” and 10” PhotoFrame models have
built in battery, the 5” model does not.
6Keep the stand clear from cables
Make sure the stand of your PhotoFrame
is clear from cables as cables could pull the
stand out of PhotoFrame to the floor.
7Temperature and humidity limitations
Operating temperature: 0° ~ 45° (Celsius)
/ 32° ~ 113° (Fahrenheit) Humidity: 20% ~
80%
1.3 Recycling
• To minimize harm to the environment, the
batteries supplied with the PhotoFrame do
not contain mercury or nickel cadmium. If
possible, when disposing of batteries, use
recycling means available in your area.
• The PhotoFrame uses materials that can be
recycled.To minimize the amount of waste
in the environment, check your area for
companies that will recover used televisions
for dismantling and collection of reusable
materials, or contact your dealer for recycling
tips.
• Please dispose of the carton and packing
material through the proper waste disposal
management in your area.
4Important

5
Your PhotoFrame
ENGLISH
2. Your PhotoFrame
2.1 Product Overview
2.1.1 What’s in the box
Digital PhotoFrame Power adaptor USB Cable to PC
(male B type plug)
Quick start guide
Digital photo display 7FFI series
Connect
2Setup
3Enjoy
1
Quick start guide User manual and Auto Run
software on CD
What else you’ll need
AC
Power outlet Digital Photos on memory card or PC

2.1.2 Control Buttons
1
2
3
4
5
1. Play/Stop | Slideshow
2. Navigation controller | OK
3. Menu
4. Reset Button
5. Power ON/OFF
• Use your PhotoFrame by pressing the control
buttons in the back.
• The control buttons and instructions are
shown at the bottom of the menu screen.
Use the navigation controller to move
between the menus. Move it left and right to
cycle through the menu tree.
2.1.3 Connections
Memory Card
Photo display (underside)
A. CF Card
B. SD/ MMC /MS / xD Card
Inserting a memory card:
• Insert the memory card into the slot in the
frame.
• For a Compact Flash card, firmly slide card in
the larger slot end first and face DOWN.
• For a xD, SD, MMC, or Memory Stick card
slide card in the smaller slot end first and face
UP until it locks in-place.
After a few seconds photos on the memory
card will display and a slideshow will start.
Please DO NOT remove the memory card
just after inserting it in PhotoFrame or when
PhotoFrame is counting the Photo.Wait until
the screen is stable
Removing a memory card:
• To remove the Compact Flash card, pull out
the card slowly.
• To remove the xD, xD, SD, MMC, or Memory
Stick card, push the card again to unlock and
then pull out the card.
Note:
To copy photo from the memory card to the
PhotoFrame read the copying photo section.
6Your PhotoFrame

Tips:
• Increase the memory of the PhotoFrame
by permanently inserting permanently a
memory card into it.This allows the same
functions as the internal memory to be
performed.
• Two memory card slots can be used at the
same time; therefore one can be dedicated for
the extended memory, and the other slot for
reading and copying pictures from the camera
memory card.
Note:
To be able to delete photos on the memory
card this function on the memory card must
be allowed.To do so read the “Setup- Memory
card” section.
USB Connections
For Windows PC (XP & Vista):
• To copy photos from PC to PhotoFrame,
install Auto Run software PhotoFrame
manager on PC.
• For installation and more details about his
application, follow instrustions in user manual
on CD.
PhotoFrame™
PhotoFrame
PC
For Mac System: (OS X):
• Connect PhotoFrame to the Mac via USB
cable. (it will be recognized as a mass storage
device.)
• Select photos to be transferred and copy
them directly under the root directory of
PhotoFrame. (Only JPEG format supported)
• Disconnect the USB cable.
• After a few seconds, all photos will be copied
to default album in PhotoFrame.
Note:
Do not unconnect PhotoFrame when copying or
transfering Photo betweeen PC and PhotoFrame
2.2 Product highlights
The PhotoFrame is designed to be flexible and
convenient to use it provides the following
features:
• High pixel density for shart and crisp photo
display.
• View photos directly from memory cards
– no PC needed.
• Runs on battery up to one hour.
• Auto-Tilt function so portrait and landscape
photos are displayed in the best possible way.
• Rotating stand for best possible way of
viewing photos.
• Clock and event reminder so that you can
remember those e special days.
7
Your PhotoFrame
ENGLISH

3. Getting started
3.1 Placing the product
The PhotoFrame should be placed on a flat
surface and close to a power socket. Keep it
away from high temperatures and high levels of
moisture
3.2 Connecting to the mains
Connect the supplied power cable from
PhotoFrame to a power outlet.
Click
Note:
For safety reason and best stability Philips
recommend to adjust the stand with the angle
defined by the two clicked position. Using other
positions may cause the PhotoFrame to fall and
is under the entire responsibility of the user.
3.3 Charging the batteries
The batteries take approximately 2 hours to
be fully charged, when PhotoFrame is off and5
hours when it is on. Connect the PhotoFrame
to a power outlet as shown above.The internal
battery will start charging and the battery LED
turns blue and flashes.
3.4 Turning on your PhotoFrame
Press the power ON/OFF button.
The power LED will be blue and a slide show
will play.
3.5 Initial Setup
3.5.1 Access the Main Menu
The main menu can be accessed by either
pressing the menu button during a slide show
or photo or by left clicking the controller
from any menu item until you are returned to
the main menu.
3.5.2 Selecting your preferred language
1• Press the menu button to access the
MainMenu.
• Navigate down to highlight the setup
icon.
• Navigate right or press the OK button to
access the setup menu.
8Getting Started