Philips SPF1237/12 User manual

Register your product and get support at
www.philips.com/welcome
EN User Manual
SPF1237
PhotoFrame

3EN
8 Upgrade the PhotoFrame 18
9 Product information 19
10 Frequently asked questions 20
11 Glossary 21
Contents
1 Important 4
Safety 4
Notice 4
Banned Substance Declaration 6
2 Your PhotoFrame 7
Introduction 7
What’s in the box 7
Overview of the remote control 7
Overview of your PhotoFrame 8
3 Get started 9
Install the stand 9
Connect power 9
Turn on the PhotoFrame 9
Transfer photos 10
4 Display photos 12
Manage slideshow and photos 12
5 Browse and manage photos 13
6 Clock and calendar 14
7 Setup 15
Select an on-screen language 15
Adjust display brightness 15
Set time and date 15
Set display auto on/off 16
Select slideshow frequency 16
Select a slideshow transition effect 16
View the status of the PhotoFrame 16
Restore factory defaults 17
Need help?
Please visit www.philips.com/welcome where
you can access a full set of supporting materials
such as user manual, the latest software updates
and answers to frequently asked questions.

4
Notice
This product is in compliance with the
essential requirements and other relevant
provisions of Directives 2006/95/EC (Low
Voltage), 2004/108/EC (EMC).
The making of unauthorized copies of
copy-protected material, including computer

recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
End of life disposal
 Your new product contains materials that
can be recycled and reused. Specialized
companies can recycle your product to
increase the amount of reusable materials
and to minimize the amount to be
disposed of.
 
on how to dispose your old monitor from
your local Philips dealer.
 (For customers in Canada and U.S.A.)
Dispose the old product in accordance to
local-state and federal regulations.
For additional information on recycling contact
www.eia.org (Consumer Education Initiative).
1 Important
Safety
Safety precautions and maintenance
 Never touch, push, rub or strike the
screen with hard objects as this may
damage the screen permanently.
 When the product is not used for long
periods, unplug it.
 Before you clean the screen, turn off and
unplug the power cord. Only clean the
screen with a soft, water-damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners to clean
the product.
 Never place the product near naked

direct sunlight.
 Never expose the product to rain or
water. Never place liquid containers, such
as vases, near the product.
 Never drop the product. When you drop
the product, it will be damaged.
 Ensure that you install and use services or
software only from trustworthy sources
free of virus or harmful software.
 This product is designed for indoor use
only.
 Only use the supplied power adaptor for
the product.
EN

5
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment
and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
North Europe Information (Nordic
Countries)
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE
OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR
DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT
NETLEDNINGENS STIK OG STIKKONTAKT
ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
Recycling Information for Customers
Philips establishes technically and
economically viable objectives to optimize
the environmental performance of the
organization’s product, service and activities.
From the planning, design and production
stages, Philips emphasizes the importance of
making products that can easily be recycled.
At Philips, end-of-life management primarily
entails participation in national take-back
initiatives and recycling programs whenever
possible, preferably in cooperation with
competitors.
There is currently a system of recycling up and
running in the European countries, such as
The Netherlands, Belgium, Norway, Sweden
and Denmark.
In U.S.A., Philips Consumer Lifestyle North
America has contributed funds for the
Electronic Industries Alliance (EIA) Electronics
Recycling Project and state recycling initiatives
for end-of-life electronics products from
household sources. In addition, the Northeast
Recycling Council (NERC) - a multi-state

recycling market development - plans to
implement a recycling program.

be taken back by Environment Protection
Administration (EPA) to follow the IT product
recycling management process, detail can be
found in web site www.epa.gov.tw.
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
EN

6
VAROITUS:
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO
VOIDAAN TARVITTAESSA HELPOSTI
IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ
DU PASSE PÅ AT KONTAKTENE FOR
STØMTILFØRSEL ER LETTE Å NÅ.
Banned Substance
Declaration
This product complies with RoHS.
Norge

Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke

nettkontakten.

støt, skal apparatet ikke utsettes for regn eller
fuktighet.
EN

7
 User manual
Overview of the remote
control
aMENU
 Press to enter/exit a menu.
bOK
 Press to play/pause slideshow.
 
c/ / /
 Press to select the upper/lower/
right/left option.
d
 Press to go to the home screen.
 Press to go back.
Registeryour product and get support at
www.philips.com/welcome
PhotoFrame
User Manual
MENU
OK
b
ad
c
2 Your
PhotoFrame
Congratulations on your purchase, and

support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With Philips Digital PhotoFrame, you can display
JPEG photos in high quality directly from your
memories cards.
What’s in the box
 Philips Digital PhotoFrame
 Stand
 AC-DC power adaptor
 Remote control
MENU
OK
EN

8
hStand hole
iWall mounting hole
Overview of your
PhotoFrame
aBACK|POWER
 Hold to turn on/off the PhotoFrame
 Press to go to the home screen
 Press to go back
b/ / /
 Press to select the upper/lower/
right/left option
cOK
 Press to play/pause slideshow
 
dMENU
 Press to enter/exit a menu
eKensington lock
fSD/MMC/MS/MS Pro
 Slot for an SD/MMC/MS/MS Pro
card
gDC
 Socket for the AC-DC power
adaptor
i
a
c
b
d
e
fg
h
EN

9
Connect power
Note
 When you position the PhotoFrame, make
sure that the power plug and outlet are easily
accessible.
Connect the supplied power adaptor to:
 the DC socket of the PhotoFrame
 the AC outlet
»A few seconds later, the PhotoFrame
turns on automatically.
Turn on the PhotoFrame
Note
 When you connect the PhotoFrame to a
power supply, the PhotoFrame turns on
automatically.
1When the PhotoFrame is turned off and
connected to the power supply, you can
press BACK|POWER to turn on the
PhotoFrame.
»A few seconds later, the home screen
is displayed.
3 Get started
Caution
 Use the controls only as stated in this user
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the stand

attach the supplied stand to the back of the
PhotoFrame.
1Insert the stand into the PhotoFrame.
2Screw the stand into the stand hole

EN

10
You can play JPEG photos on one of the
following storage device that is connected to
the PhotoFrame:
 Secure Digital (SD)
 Secure Digital High Capacity (SDHC)
 Multimedia Card (MMC)
 Memory Stick (MS)
 Memory Stick Pro (MS Pro, with adaptor)
 
However, we do not guarantee the operations
for all types of storage device media.
1Insert a storage device into the slot.
»

PhotoFrame:
 The screen prompts you to select a
language.
 Press / to select a language, and then
press OK
Turn off the PhotoFrame
Note
 You can only turn off the PhotoFrame after all
copy and save actions are complete.
 To turn off the PhotoFrame, press and
hold BACK|POWER for 2 seconds.
Transfer photos
Caution
 Do not remove a storage device from the
PhotoFrame when you are transferring photos
from the storage device.
EN

11
To copy photos to the PhotoFrame:
1Select [Yes], and then press OK to

To display photos directly:
1Select [No], and then press OK to

2Select [Play], and then press OK.
 To remove a storage device, pull it out.
EN