Philips SPF2307/77 User manual

Register your product and get support at
www.philips.com/welcome
EN User manual
SPF2307
SPF2327
PhotoFrame

3EN
Need help?
Please visit www.philips.com/welcome where
you can access a full set of supporting materials
such as user manual, the latest software updates
and answers to frequently asked questions.
Contents
1 Important 4
Safety 4
Notice 4
Banned Substance Declaration 6
Class II statement 6
2 Your PhotoFrame 7
Introduction 7
What’s in the box 7
Overview of your PhotoFrame 8
3 Get started 9
Install the stand 9
Connect power 9
Turn on the PhotoFrame 10
Transfer media 11
Know these keypad icons 12
4 Display photos 13
Manage slideshow and photos 13
Zoom and crop a photo 14
5 Browse 15
Browse and manage albums and media 15
6 Clock 18
Display the clock 18
Clock menu 18
7 Message 19
Create a message 19
Edit a message 20
View a message 22
8 Settings 23
Select an on-screen language 23
Adjust brightness 23
Set time/date 24
Set SmartPower timer 25
Hibernate the PhotoFrame 26
Set auto orientation 26
Turn button sound on/off 27
Slideshow setting 27
View information of the PhotoFrame 30
Reset all settings to factory default 30
9 Upgrade the PhotoFrame 31
10 Product information 32
11 Frequently asked questions 34
12 Glossary 35

4
Failure to do so shall void any warranty, stated
or implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised
in this manual shall void the warranty.
This product is in compliance with the
essential requirements and other relevant
provisions of Directives 2006/95/EC (Low
Voltage), 2004/108/EC (EMC).
Respect copyrights
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
End of life disposal
Your new product contains materials that•
can be recycled and reused. Specialized
companies can recycle your product to
increase the amount of reusable materials
and to minimize the amount to be
disposed of.
Please find out about the local regulations•
on how to dispose your old monitor from
your local Philips dealer.
(For customers in Canada and U.S.A.)•
Dispose the old product in accordance to
local-state and federal regulations.
For additional information on recycling contact
www.eia.org (Consumer Education Initiative).
1 Important
Safety
Safety precautions and maintenance
Never touch, push, rub or strike the•
screen with hard objects as this may
damage the screen permanently.
When the product is not used for long•
periods, unplug it.
Before you clean the screen, turn off and•
unplug the power cord. Only clean the
screen with a soft, water-damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners to clean
the product.
Never place the product near naked•
flames or other heat sources, including
direct sunlight.
Never expose the product to rain or•
water. Never place liquid containers, such
as vases, near the product.
Never drop the product. When you drop•
the product, it will be damaged.
Ensure that you install and use services or•
software only from trustworthy sources
free of virus or harmful software.
This product is designed for indoor use•
only.
Only use the supplied power adaptor for•
the product.
The socket-outlet shall be installed•
near the equipment and shall be easily
accessible.
Notice
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops.
EN

5
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
North Europe Information (Nordic
Countries)
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE
OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR
DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT
NETLEDNINGENS STIK OG STIKKONTAKT
ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
VAROITUS:
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO
VOIDAAN TARVITTAESSA HELPOSTI
IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ
DU PASSE PÅ AT KONTAKTENE FOR
STØMTILFØRSEL ER LETTE Å NÅ.
Recycling Information for Customers
Philips establishes technically and
economically viable objectives to optimize
the environmental performance of the
organization’s product, service and activities.
From the planning, design and production
stages, Philips emphasizes the importance of
making products that can easily be recycled.
At Philips, end-of-life management primarily
entails participation in national take-back
initiatives and recycling programs whenever
possible, preferably in cooperation with
competitors.
There is currently a system of recycling up and
running in the European countries, such as
The Netherlands, Belgium, Norway, Sweden
and Denmark.
In U.S.A., Philips Consumer Lifestyle North
America has contributed funds for the
Electronic Industries Alliance (EIA) Electronics
Recycling Project and state recycling initiatives
for end-of-life electronics products from
household sources. In addition, the Northeast
Recycling Council (NERC) - a multi-state
non-profit organization focused on promoting
recycling market development - plans to
implement a recycling program.
In Asia Pacific, Taiwan, the products can
be taken back by Environment Protection
Administration (EPA) to follow the IT product
recycling management process, detail can be
found in web site www.epa.gov.tw.
Environmental information
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
EN

6
Banned Substance
Declaration
This product complies with RoHs and Philips
BSD (AR17-G04-5010-010) requirements.
Class II statement
Class II equipment symbol:
This symbol indicates that this product has a
double insulation system.
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke
frakoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
For å redusere faren for brann eller elektrisk
støt, skal apparatet ikke utsettes for regn eller
fuktighet.
EN

7
Quick start guide•
Registeryour product and get support at
www.philips.com/welcome
PhotoFrame
Quick Start Guide
2 Your
PhotoFrame
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this Philips Digital PhotoFrame, you can
use the PhotoFrame to:
Display JPEG photos•
Create gift messages•
What’s in the box
Philips Digital PhotoFrame•
Stand•
AC-DC power adaptor•
CD-ROM with User manual•
PhotoAlbum
EN

8
f
Slot for a USB cable to PC•
gSD/MMC/MS/MS Pro
Slot for an SD/MMC/MS/MS Pro•
card
hKensington lock
iStand hole
jWall mounting hole
Overview of your
PhotoFrame
a
Press to switch mode: slideshow/•
clock/calendar
Hold to turn on/off the PhotoFrame•
b
Press to go back•
Hold to go to the home screen•
cOK (Joystick)
Press to confirm a selection•
Press to pause or resume play•
Move up/down/left/right to select•
the upper/lower/right/left option
dMENU
Press to enter/exit the menu•
eDC
Socket for the AC-DC power•
adaptor
a
j
i
h
c
b
d
eg f
EN

9
Connect power
Note
When you position the PhotoFrame, ensure• that the power plug and outlet are easily
accessible.
1Connect the power cord to the DC
socket of the PhotoFrame.
2Connect the power cord to a power
supply socket.
A few seconds later, the PhotoFrame»
turns on automatically.
3 Get started
Caution
Use the controls only as stated in this user• manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the stand
To place the PhotoFrame on a flat surface,
attach the supplied stand to the back of the
PhotoFrame.
1Insert the stand into the PhotoFrame and
position the indication on the stand to
the position.
2Turn the stand anti-clockwise 45 degrees
to the position and lock it to the
PhotoFrame firmly.
EN

10
Move the joystick to set time and date,•
and then press OK.
Tip
If the PhotoFrame is disconnected from the• power supply for a long time, you need set
time and date again after you turn on the
PhotoFrame.
Turn off the PhotoFrame
Note
You can only turn off the PhotoFrame after all• copy and save actions are complete.
To turn off the PhotoFrame, press and•
hold for about 2 seconds.
Turn on the PhotoFrame
Note
When you connect the PhotoFrame to a• power supply, the PhotoFrame turns on
automatically.
1When the PhotoFrame is turned off and
connected to the power supply, hold to
turn on the PhotoFrame.
For the first time you turn on the
PhotoFrame:
The screen prompts you to select a•
language.
Select a language, and then press• OK.
The screen prompts you to set time and•
date.
EN

11
To copy photos to the PhotoFrame:
1Select [Yes], and then press OK.
• To remove a storage device, pull it out of
the PhotoFrame.
Transfer photos with a computer
Caution
Do not disconnect the PhotoFrame from the• computer during media transfer.
1Connect a USB cable to the PhotoFrame
and to the computer.
You can drag and drop the media from»
the computer to an album on the
PhotoFrame.
2When the transfer is complete,
disconnect the USB cable from the
computer and the PhotoFrame.
Tip
You can transfer media from the PhotoFrame• to a computer.
The transfer speed depends the operating
• system and the software configuration of the
computer.
Transfer media
Transfer photos with a storage device
Caution
Do not disconnect the storage device from the• PhotoFrame during media transfer.
The PhotoFrame supports most types of the
following storage device:
Secure Digital (SD)•
Secure Digital High Capacity (SDHC)•
Multimedia Card (MMC)•
Memory Stick (MS)•
Memory Stick Pro (MS Pro) (with•
adaptor)
1Insert a storage device into the
PhotoFrame.
An option menu is displayed.»
[Play Photos]: Select it to play media
on the storage device
[Browse]: Select it to browse media
on the storage device
[Copy to PhotoFrame]: Select it to
start transfer operation
2Select [Copy to PhotoFrame], and then
press OK.
A confirmation message is displayed.»
EN

12
Know these keypad icons
Input in English
Input in supported
European languages
Input in Simplified Chinese
Input in Russian
/ ABC Switch to select symbols,
punctuations, alphabet or
numbers
aA Switch between upper and
lower case
Enter a blank space
Enter a line break
EN

13
Manage slideshow and photos
You can take the following steps to manage
the photo in slideshow mode or the slideshow
settings:
1Press MENU.
An option menu is displayed.»
2Select an option, and then press OK.
• [View Mode]: Select the view mode
• [Add to Favorites]: Add the photo to the
[Favorites] album on the PhotoFrame
• [Slideshow Settings]
• [Interval]: Set the interval in
slideshow
• [Shuffle]: Play media randomly or not
• [Color Tone]: Select the color for
the photo
• [Transition Effect]: Select the
transition effect
• [Background Color]: Select the
background color
• [Rotate]: Select an orientation to rotate
the photo
• [Copy]: Copy the photo to another
album
• [Delete]: Delete the photo
• [Zoom]: Zoom and crop a photo
• [Brightness]: Move the joystick up/down
to adjust the brightness of display
4 Display photos
Note
You can display JPEG photos in slideshow• mode on the PhotoFrame.
1In the home screen, select [Play], and
then press OK.
Photos are displayed in slideshow»
mode.
In slideshow mode:
To pause the slideshow, press• OK.
To resume the slideshow, press• OK again.
To select the previous/next photo, move•
the joystick to the left/right.
To view photos in filmstrip mode, move•
the joystick up.
In filmstrip mode:
To select the previous/next photo, move•
the joystick to the left/right.
To return to slideshow mode, press• OK.
Tip
During collage slideshow, photos are displayed• randomly.
EN

14
8Select a location to save the new photo,
and then press OK.
After the photo is saved, the»
PhotoFrame goes back to the
slideshow mode.
Zoom and crop a photo
With the PhotoFrame, you can zoom in a
photo, crop it, and save it as a new photo.
1In slideshow mode, press MENU.
An option menu is displayed.»
2Select [Zoom].
3Press OK repeatedly to zoom in the
photo (or exit the zoom mode).
4Move the joystick to pan the photo.
5Press MENU.
6Select [Crop and Save], and then press
OK.
A confirmation message is displayed.»
7Select [Yes], and then press OK.
To cancel the operation, select• [No]
and then press OK.
EN

15
Albums are displayed in wave mode.»
• To access album mode, press .
• To return to wave mode, press .
In wave/album mode,•
Press• OK once: A photo is displayed
in pause mode.
Press• OK twice: Slideshow is started.
Manage albums and media:
1Select an album/device, press MENU.
An option menu is displayed.»
2Select an option, and then press OK to
continue.
Album menu:
• [Add to Favorites]: Add media in the
album to the [Favorites] album
• [Create New Album]: Create an album
5 Browse
Browse and manage albums
and media
You can browse and manage albums and media
in wave mode or album mode.
• Wave mode:
• Album mode:
Browse albums:
1In the home screen, select [Browse] and
then press OK.
EN

16
Add media to the favorite album
To add media in the album to the [Favorites]
album:
1Select [Add to Favorites], and then press
OK.
Create an album
1Select [Create New Album], and then
press OK.
2To enter the name (about 24 characters),
select an alphabet/number and then press
OK.
To switch between uppercase and•
lowercase, select aA on the displayed
keypad and then press OK.
3When the name is complete, select
and then press OK.
4Press OK to start the saving process.
Copy media
1Select [Copy], and then press OK.
2Select a destination album, and then
press OK to start copy.
Move media
1Select [Move], and then press OK.
2Select a destination album, and then
press OK to start move.
Delete media
1Select [Delete], and then press OK.
A confirmation message is displayed.»
2Select [Yes], and then press OK to start
deletion.
To cancel the operation, hold• .
• [Copy]: Copy media in the album to
another album
• [Move]: Move media in the album to
another album
• [Delete]: Delete media in the album
• [Rename]: Rename the album
• [Multiple-select]: Select multiple photos
to manage
Thumbnail photo menu:
• [Add to Favorites]: Add media in the
album to the [Favorites] album
• [Copy]: Copy media in the album to
another album
• [Move]: Move media in the album to
another album
• [Delete]: Delete media in the album
• [Rotate]: Rotate the photo in the album
• [Color Tone]: Select a color for the
photo
• [Multiple-select]: Select multiple photos
to manage
When you select the [Favorites] album, a
different menu is displayed.
• [Delete]: Delete media in the album
• [Copy]: Copy media in the album to
another album
EN

17
4Select an option to continue.
• [Add to Favorites]: Add the selected
media to the [Favorites] album
• [Copy]: Copy the selected media to
another album
• [Move]: Move the selected media to
another album
• [Delete]: Delete the selected media
• [Rotate]: Rotate the selected media
• [Play Slideshow]: Play the selected
media in slideshow mode
Rotate photos
1Select [Rotate], and then tap OK.
2Tap / to rotate the photo, and then
tap OK.
Rename an album
1Select [Rename], and then press OK to
confirm.
A keypad is displayed.»
2Move the joystick downwards twice to
enter the keypad.
3To enter the name (about 24 characters),
select an alphabet/number and then press
OK.
To switch between uppercase and•
lowercase, select aA on the displayed
keypad and then press OK.
4When the name is complete, select
and then press OK.
Select multiple photos to manage
1Select [Multiple-select], and then press
OK.
2Select media.
To select all media in the album,•
press OK.
To select some of the media: Move•
the joystick and press OK to select
a medium. Then repeat this step to
select others.
To de-select a medium, select it and•
then press OK again.
3After selection is complete, press MENU
to continue.
An option menu is displayed.»
EN

18
• [Time and Date]: Move the joystick up/
down/left/right to set time/date or to
select a time/date format. For details, see
Section “Settings - Set time and date”.
Select a clock/calendar style
1In the clock menu, select [Select Clock]
and then press OK.
2Move the joystick left/right to select a
clock or calendar template, and then
press OK.
To go back to the home screen, hold•
.
6 Clock
Display the clock
1In the home screen, select [Clock] and
then press OK.
A clock/calendar is displayed.»
Clock menu
1When a clock/calendar is displayed, press
MENU to enter the clock menu.
• [Select Clock]: Move the joystick left/
right to select another clock or calendar
to be displayed.
EN

19
Edit the text of the message or•
change image of the message.
Set the real time and date if•
applicable.
4Select [Done].
The screen prompts you to schedule»
the message.
5Schedule the message.
7 Message
Create a message
1In the home screen, select [Message] and
then press OK.
2Select [Add a message to your photo],
and then press OK.
3Move the joystick right or left to select a
message template, and then press OK.
EN

20
• To view the available messages, select
[View Message].
• To go back to the home screen, hold .
Enter the name of a message
1Select [Message Name], and then press
OK.
2Move the joystick downward twice to
enter the keypad.
3To enter the name (about 24 characters),
select an alphabet/number and then press
OK.
To switch between uppercase and•
lowercase, select aA on the displayed
keypad and then press OK.
4When the name is complete, select
and then press OK.
Edit a message
1In the home screen, select [Message] and
then press OK.
• [Message Name]: Enter the name.
For details, see “Enter the name of a
message”.
• [Repeat]: Select a repeat frequency
• [Set Date]: Set the date or day
• [Set Time]: Set the time
6After you complete the message, select
[Done] and press OK.
EN

21
• [Change Image]: Change the photo
of the message
• [Edit Text]: Edit the message text
To change the photo of a message:
1Select [Change Image], and then press
OK.
2Select a photo available on the
PhotoFrame, and then press OK.
To edit the text of a message:
1Select [Edit Text], and then press OK.
2Select a preset template, and then press
OK.
The keypad is displayed.»
2Select [Add a message to your photo],
and then press OK.
3Move the joystick right or left to select a
message template, and then press OK.
4Move the joystick to select one of the
following options to edit a message.
EN