Philips SPF5008 User manual

PhotoFrame
Get started
Play
Setup
1
2
3
SPF5008
SPF5208
SPF5010
SPF5210
SPF7008
SPF7208
SPF7010
SPF7210
EN
Quick start guide

What you also need
What’s in the box
Philips Digital PhotoFrame
AC power socket
AC-DC power adaptor
AC
Memory card / USB
Stand
Computer
CD-ROM, including
• Digital User Manual
• (SPF7008/SPF7208/
SPF7010/SPF7210) Philips
PhotoFrame Manager
(Software and User
Manual)
USB cable
(not supplied to
SPF5010/SPF5210)
Quick Start Guide
1
2
3
Quick start guide
SPH8008
SPF2107
SPF2107
SPA2007
SPA2007
Connect
Install
Enjoy
Eng
PhotoFrame

Install the stand
1 Insert the stand into the PhotoFrame.
2 Position the indication on the stand to the
position.
3 (SPF5008/SPF5208) Turn the stand anti-
clockwise 45 degrees to the position and
lock it to the PhotoFrame firmly.
(• SPF5010/SPF5210/SPF7008/SPF7208/
SPF7010/SPF7210) Turn the stand clockwise
45 degrees to the position and lock it to the
PhotoFrame firmly.
1 Get started
Control buttons
a
Turn on/off the PhotoFrame•
b
Access the home screen•
c
Access the quick menu•
Access option menu•
d Zoom in/out
•
Zoom in an image
Switch modes: Album mode →thumbnail
mode →slideshow mode →zoom in 2
times →zoom in 4 times
•
Zoom out an image
Switch modes: Album mode ←thumbnail
mode ←slideshow mode ←zoom out 2
times ←zoom out 4 times
e Up/down slider
Scroll up/down at high speed
•
Select the upper item
Increase the volume
•
Select the item below
Decrease the volume
f OK
Display slideshow
•
Play/Pause slideshow/video•
Confirm a selection•
g Left/right slider
Scroll left/right at high speed
•
Select the left item
•
Select the right item

For other times when the on screen language is
selected:
1 Press and hold for more than 1 second.
The home screen is displayed.»
To turn off the PhotoFrame, press and hold
•
for about 2 seconds.
Transfer photos/music or video
files from an SD card
Caution
Do not remove a storage device from the PhotoFrame•
when files are transferring from or to the storage
device.
For details on other applicable storage device, refer to
the User Manual of your PhotoFrame in the supplied
CD-ROM.
1 Insert an SD card or other storage device into
the PhotoFrame firmly.
SPF5008/SPF5208•
Connect power
1 Connect the supplied power cord to the DC
socket of the PhotoFrame.
• SPF5008/SPF5208
• SPF5010/SFP5210/SPF7008/SPF7208/
SPF7010/SPF7210
2 Connect the power cord to a power supply
socket.
Turn on/off the PhotoFrame
Note
You can only turn off the PhotoFrame after all copy•
and save actions are complete.
For the first time use:
1 Press and hold for more than 1 second.
The language selection menu is displayed.»
2 Select a language, and then tap OK to confirm.
The home screen is displayed.»
a
b
a
b

Transfer by Philips PhotoFrame
Manager (SPF7008/SPF7208/
SPF7010/SPF7210)
Recommended way for SPF7008/SPF7208/
SPF7010/SPF7210.
Caution
Do not disconnect the PhotoFrame from the PC when•
files are transferring between the PhotoFrame and
the PC.
Note
Ensure that Philips PhotoFrame Manager is installed•
on your PC.
1 Connect the supplied USB cable to the
PhotoFrame and to a PC.
Philips PhotoFrame Manager starts»
automatically.
SPF5010/SPF5210/SPF7008/SPF7208/•
SPF7010/SPF7210
An option menu is displayed.•
2 Select [Transfer], and then tap OK to confirm.
A confirmation message is displayed.»
3 To select all photos or video/music files, select
[Yes] and then tap OK to confirm.
To select some of photos or video/•
music files, select [No] and then tap OK
to confirm. Tap / / / and OK
to select photos or video/music files,
and then tap to continue the transfer
operation.
4 Select a destination album on the PhotoFrame,
and then tap OK to confirm.
Photos/video files are transferred to the»
PhotoFrame.
To remove a storage device, pull it out from
•
the PhotoFrame.

2 Select [Transfer Photos] / [Tranfer Music] /
[Transfer Video].
3 Under [My frame photos] / [My frame music] /
[My frame videos], select a destination album/
folder.
4 Under [My computer photos] / [My computer
music] / [My computer videos], select photos
or video/music files.
5 Click the icon to start transfer.
6 After all transfer actions are complete,
disconnect the USB cable from the PC and the
PhotoFrame.
Tip
If Philips PhotoFrame Manager does not start•
automatically, you can double click its icon on the
desktop of your PC to start it.
You can also drag and drop photos from the
•
PhotoFrame to a PC.
2 Play
Browse photos/video files in
album mode
1 In the home screen, select [Browse] and then
tap OK to confirm.
Photos/video files are displayed in album»
mode.
2 Select an album, and then tap to access the
album.
3 Tap / / / to browse photos/video files in
the album.
Tip
If you select an album and then tap• OK, photos/video
files in the selected album are displayed in slideshow.

Play photos/video files
Note
With the PhotoFrame, you can play JPEG/progressive•
JPEG photos and most video clips of a digital still
camera in M-JPEG (*.avi/*.mov), MPEG-1 (*.mpg),
MPEG-4 (*.avi/*.mov/*.mp4), H.263 (*.avi/*.mov)
format. Some video clips might have compatibility
issues when played on your PhotoFrame. Before
playing, ensure that these video clips are compatible
with your PhotoFrame.
Some video clips in a format which is not compatible
•
well with your PhotoFrame, like *.3gp/*.3g2 and some
others, may be played with no audio output. When a
video clip is played with no audio output, the icon is
displayed on the screen.
In album/thumbnail/filmstrip mode, a video file is
•
displayed with the icon on the left top corner.
1 In the home screen, select [Play] and then tap
OK to confirm.
Photos/video files are displayed in slideshow»
mode.
During play:
To view the album in which the slideshow
•
image/video is saved, tap twice.
To adjust volume, tap• /
To pause/resume play, tap• OK.
To play the previous/next file, tap• / .
Play background music
Note
Only MP3 (MPEG Audio Layer III) music files can be•
played on the PhotoFrame.
1 During photo display, tap .
An option menu is displayed.»
2 Tap repeatedly to select [Play Background
Music], and then tap OK to confirm.
3 Select [Set Music], and then tap OK to
confirm.
4 Select a folder.
5 To play all music files in the folder, tap OK to
confirm.
To play a single music file, tap• to access
the folder, select a music file, and then
tap OK to confirm.

If you have set music before:
In• [Play Background Music] menu, select
[Turn On] and then tap OK to confirm.
Selected music files are played.•
To stop music play:
In• [Play Background Music] menu, select
[Turn Off] and then tap OK to confirm.
Tip
After a music file is selected, you can tap• to access
the option menu to copy/delete it.
Display a theme clock (SPF5008/
SPF5208/SPF7008/SPF7208/
SPF7010/SPF7210)
Note
Ensure that you have installed a theme clock in your•
PhotoFrame.
You can also download latest theme clocks from www.
•
philips.com/support, in the coming future.
1 In the home screen, select [Theme Clock] and
then tap OK to confirm.
2 Select [Show Current], and then tap OK to
confirm.
To select and install another theme clock:
1 Download a theme clock and save it in an SD
card before you install it.
2 Insert the SD card into the PhotoFrame.
3 In [Theme Clock] menu, select [Select Other]
and then tap OK to confirm.
4 Select a theme clock, and then tap OK to
confirm.
After the theme clock is installed, it is»
displayed automatically.

3 Setup
Bluetooth (SPF7008/SPF7208/
SPF7010/SPF7210)
Note
Bluetooth connectivity is available only on SPF7008/•
SPF7208/SPF7010/SPF7210.
Set up Bluetooth connection
With the PhotoFrame, you can set up Bluetooth
connection with a device like a mobile phone. Once a
device is recognized, it is automatically accepted when
it tries to connect with the PhotoFrame.
1 In the home screen, select [Settings] and then
tap OK to confirm.
2 Select [Bluetooth], and then tap OK to
confirm.
3 Select [Setup], and then tap OK to confirm.
4 Select [Bluetooth On], and then tap OK to
confirm.
To set off• Bluetooth connection, select
[Bluetooth Off] and then tap OK to
confirm.
Tip
If• Bluetooth connection on your PhotoFrame is
enabled, the Bluetooth icon is displayed on the top-
right corner of the screen.
Photos obtained via
• Bluetooth connection are saved
in the Bluetooth album. You can access or manage the
Bluetooth album the same way you access or manage
other albums on the PhotoFrame.

Set Bluetooth pin code
To keep security, you can set a pin code (from 1 to
16 digits) on the PhotoFrame.The default pin code
is 0000.
1 In the home screen, select [Settings] and then
tap OK to confirm.
2 Select [Bluetooth], and then tap OK to
confirm.
3 Select [Security], and then tap OK to confirm.
4 Select [Pin Code], and then tap OK to
confirm.
A key pad is displayed.»
5 Select a number, and then tap OK to confirm.
6 Repeat Step 5 until the pin code is complete.
7 Select [Enter], and then tap OK to confirm.
8 To set the pin code on, select [Pin Code On]
and then tap OK to confirm.
To set the pin code off, select
• [Pin Code
Off] and then tap OK to confirm.
Send photos via Bluetooth
connection by your mobile
phone
Note
Ensure that• Bluetooth connection on your mobile
phone is enabled.
Ensure that
• Bluetooth connection on your
PhotoFrame is enabled.
Detailed operation procedure may vary based on
•
different mobile phones.
On your mobile phone:
1 Select photos to be sent to the PhotoFrame.
2 Select [Send] > [Bluetooth], and then confirm
the selection.
Your Philips PhotoFrame is searched.»
3 If a pin code is required, enter the pin code
(0000 by default ) of the PhotoFrame.
4 Select [Send], and then confirm the selection.
Selected photos are sent to and saved in»
the Bluetooth album on the PhotoFrame.