Philips Showline SL SUNLED 10 User manual

SL SUNLED 10

SL SUNLED 10 LED Luminaire installation & User’s Manual
Version as of: 24-004-3808-00 Rev1.0
2016 Philips Group. All rights reserved.
Showline Offices
Showline - Dallas
10911 Petal Street
Dallas, TX 75238
Tel: [phone]
Fax: [phone]
Showline - Europe
Marssteden 152
Enschede 7547 TD
The Netherlands
Tel: [phone]
Fax: [phone]
Showline - Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: [phone]
Fax: [phone]
Showline - Asia
Unit C, 14/F, Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: [phone]
Fax: [phone]
Website:
www.philips.com/showline
The material in this manual is for information purposes only and is subject to change without notice. Showline assumes
no responsiblitity for any errors or omissions which may appear in this manual. For comments and suggestions regarding
corrections and/or updates to this manual, please visit the Showline website at or contact yourwww.philips.com/showline
nearest Showline office.
Note: Information contained in this document may not be duplicated in full or in part by any person without prior written
approval of Showline. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of
this document for all other purposes is specifically prohibited.
Document Number: SL SUNLED 10 User’s Manual

Additional Reso urces for DMX512
For more information on installing DMX512 control systems, the following publication is available for purchase
from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide
for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:
USITT
315 South Crouse Avenue, Suite 200
Syracuse, NY 13210-1844
Phone: [phone] or 1.315.463.6463
www.usitt.org
Showline Limited Two-Year Warranty
Showline offers a two-year limited warranty of its luminaires against defects in materials or workmanship from the
date of delivery. A copy of Showline two-year limited warranty containing specific terms and conditions can be
obtained by contacting your local Showline office.
Warnings and Notices
When using electrical equipment, basic safety precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
Do not use outdoors.
Do not mount near gas or electric heaters.
Equipment should be mounted in locations and at heights where it will not readily be subject
to tampering by unauthorized personnel.
The use of accessory equipment not recommended by the manufacturer may cause an unsafe
condition.
Do not use this equipment for other than intended use.
Refer service to qualified personnel.
WARNING: You must have access to a mains circuit breaker or other power disconnect device
before installing any wiring. BE sure that power is disconnected by removing fuses or turning the
mains circuit breaker off before installation. Installing the device with power on may expose you
to dangerous voltages and damage the device. A qualified electrician must perform this installation.
WARNING: Refer to National Electrical Codeand local codes for cable specifications.
Failure to use proper cable can result in damage to equipment or danger to personnel.
WARNING: This equipment is intended for installation in accordance with the Nation Electric
Code and local regulations. It is also intended for installation in indoor applications only. Before
any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to
avoid shock or damage to the control. It is recommended that a qualified electrician perform this
installation.
Installation & User’s Manual
SL SUNLED 10 LED Luminaires

TABLE OF CONTENTS
TABLE OF CONTENTS
PREFACE
About this Manual
Included Items
SL SUNLED 10 LED LUMINAIRE OVERVIEW
SL SUNLED 10 LED Luminaire Components
Major Luminaire Components
LCD Display / Menu System
INSTALLATION AND SET UP
Power Requirements
AC Power Operation
Connecting Power
Connecting SL SUNLED 10 LED Luminaires to AC Power
Connecting to the DMX512 Network
Mounting Luminaire
OPERATION AND PROGRAMMING
LCD Display and Menu System
LCD Display and Menu System Operation
Edit a Preset
DMX Address
Dimming Curve Selection
SL SUNLED 10 LED Luminaires Menu Tree
Master / Slave Operational Mode
DMX CONTROL
Chase
Chase Speed
DMX Map
DMX Detail
SL SUNLED 10 LED Luminaire RDM Parameter IDs
CLEANING AND CARE
Special Cleaning and Care Instructions
Front Lens Cleaning
Service and Maintenance
TECHNICAL SPECIFICATIONS
SL SUNLED 10 LED Luminaire Operational Specifications
SL SUNLED 10 LED Luminaire Dimensions 23
........................................................................................................................................
..............................................................................................................................................
......................................................................................................................................
.........................................................................................................................................
......................................................................................................................................
...............................................................................................................................
................................................................................................................
..................................................................................................................
...................................................................................................................
.....................................................................................................................
.......................................................................................................
................................................................................................................................
..........................................................................................................................................................
.................................................................................................................................................
...................................................................................................................................................
.................................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
............................................................................................
...............................................................................................................................
...................................................................................................................
..............................................................................
.............................................................................................................
.....................................................................................................................................
...............................................................................................................................
............................................ ............................................
................................................................
.......................................................................
..........................................................................................
3
3
4
4
5
6
6
6
6
7
8
9
9
10
10
10
11
12
13
14
15
16
17
18
22
22
22
23
Chase
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires
2

PREFACE
1.About this Manual
The document provides installation and operation instructions for the following products:
S L SUNLED 10 LED Luminaire
Please read all instructions before installing or using this product. Retain this manual for future reference. Additional
product information and descriptions may be found on the product specification sheet.
Note: The SL SUNLED 10 LED Luminaire is universal voltage 100 to 240 VAC (auto-ranging).
2.Included Items
Each SL SUNLED 10 LED Luminaire includes the following items:
SL SUNLED 10 LED Luminaire
Power Cables with bare end
Installation and User’s Manual ( t his document)
Installation & User’s Manual
SL SUNLED 10 LED Luminaires
3

SL SUNLED 10 LED LUMINAIRE OVERVIEW
1. SL SUNLED 10 LED L u minaire Components
Major Luminaire Components
Figure 1: SL SUNLED 10 LED Luminaire Components
High Intensity LED Array
Yoke(Tilt) Position
Locking handle
DMX512 /
AC Input
RDM Input
DMX512 /
AC Output
LCD Display/Menu System
RDM Output
Main Body
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires
4
Top view without yoke

LCD Display / Menu System
Figure 2: LCD Display & Menu System
Note: For Menu operation and programming details, refer to "LCD Display and Menu System" on page 9.
SL SUNLED 10
Professional LED Strobe
Edit a Preset
Home(menu settings)
LCD Display
NOTE: Menu rotates with orientation of
luminaire and menu buttons are always in
the same position(with rotation of menu)
LEFT Arrow Button
RIGHT Arrow Button
Edit a Chase
DMX512 Addressing
Retrn to Main Screen
DOWN Arrow Button
UP Arrow Button
To rotate menu 180 degrees from current orientation,
press and hold the two center buttons for 2 seconds.
CHECK MARK(Accept) Button
Installation & User’s Manual
SL SUNLED 10 LED Luminaires
5

INSTALLATION AND SET UP
1.Power Requirements
The SL SUNLED 10 LED Luminaire operates on AC input voltages from 100 to 240 VAC.
WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely
remove power from unit when not in use.
AC Power Operation
When connected to an AC source, the unit operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire
contains an auto-ranging power supply. Each luminaire can draw up to 150 Watts.
WARNING!
Maximum amount of units that may be daisy-chained is (A) 11 units 100 ~ 120VAC (15 Amps) or (B)
20 units 230 ~ 240VAC (15 Amps).
.
2.Connecting Power
Units can be powered in one of two ways:
Direct connection to an AC power sour c e using an AC input cable with connector.
Connection from the AC output of another SL SUNLED 10 L ED Luminaire. When using this method, it is
very important not to connect any other type of equipment device.
WARNING! Only connect other SL SUNLED 10 LED Luminaires to the AC Output (Thru) connector of an
SL SUNLED 10 LED Luminaire.
Connecting SL SUNLED 10 LED Luminaires to AC Power
Table 2 on page 7 describes how to connect power to you rS L SUNLED 10 L ED Luminaire. Field wiring of
the SL SUNLED 10 LED Luminaire is straight forward. A total of 3 wires/conductors is supplied from the unit.
The following wiring scheme is used:
Table 1: SLSUNLED10 LED Luminaire Voltage (VAC) vs. Current*
Voltage (AC)Total Current (A)Voltage (AC)Total Current (A)
100 1.50 180 0.83
110 1.36 190 0.79
120 1.25 200 0.75
130 1.15 210 0.71
140 1.07 220 0.68
150 1.00 230 0.65
160 0.94 240 0.62
170 0.88
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires
6

Table 2: SL SUNLED 10 LED Luminaire AC Input Connections
Figure 3: SL SUNLED 10 LED Luminaire AC Input & Output Connections
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, by the user, with an
approved cable through an Authorized Dealer or Service Center.
3.Connecting to the DMX512 Network
Basic DMX512 installation consists of connecting multiple SL SUNLED 10 LED Luminaires together (up
to 32 luminaires) in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to
the DMX connector on the first SL SUNLED 10 LED Luminaire. Another cable runs from the other
DMX connector on the first unit to a DMX connector on the next SL SUNLED 10 LED Luminaire
Figure 4: SL SUNLED 10 LED Luminaire DMX512 Input / Output Connections
Back of Unit
Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on
page 1. For SL SUNLED 10 LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 13
.
POWER INPUT:
100-240V~,
50/60Hz.
THRU
POWER
INPUT (10A max.)
AC Input AC Output
DMX512 /
RDM Input
DMX512 /
RDM Output
(or DMX512 device to be controlled).
Installation & User’s Manual
SL SUNLED 10 LED Luminaires
7

Figure 5: SL SUNLED 10 LED Luminaire - DMX512 Connections
Figure 6: Mounting the fixture--Hanging Application
4. Mounting Luminaire
DMX512
DMX512 (out from first
to second luminaire)
DMX512 (out to the next
luminaire or DMX512
controlled device)
(from console or
control device)
The SL SUNLED 10 LED Luminaire is provided with a adjustable mount assembly. This assembly easily
attaches and detaches from the luminaire via a two bolts.This mount assembly is designed to accept a variety of
mounting hooks, clamps, etc. for hanging applications or stud adapters for stand mounting.
Simply attach hook, clamp, stud, etc. to the SL SUNLED 10 LED Luminaire mount assembly in the M10 hole.
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires
8

OPERATION AND PROGRAMMING
1. LCD Display and Menu System
The SL SUNLED 10 LED Luminaire’s LCD Display and Menu System provides local control for
accessing the following fixture’s settings:
Presets (Standard and User Defined)
Settings
Effects(Chases - preloaded and user defined)
Lock fixture
Password
Status
Note: If there are multiple luminaires in a system, changes would need to be made at each LCD Menu as desired.
Upon power up, the LCD will display the main screen showing menu of SL SUNLED 10 LED.
User can use “ ” and “ ” to select then enter the desired function menu.
Figure 7: LCD Display and Menu System
2. LCD Display and Menu System Operation
The LCD Display Menu system consists of several categories. Upon power up, the LCD will display the main
menu automatically. There are totally 6 menus available including Preset, Effects, Settings, Lock fixture, Password
and Status. When the desired menu item is reached, press OK button to display the menu options and to navigate
To navigate and access menu settings/selections:
Step 1. Make sure unit is powered and turned on.
Step 2. Press the desired button t o access menu categories.
Step 3. Use “ ” and “ ” arrow buttons to n a v igate through
Step 4. Make changes as desired.
Press OK button to accept changes.
the various options and settings.
and configure the menu options as required.
SL SUNLED 10
Professional LED Lighti ng
Edit a Preset
Home(menu settings)
LCD Display
LEFT Arrow Button
RIGHT Arrow Button
Edit a Chase
DMX512 Addressing
Retrn to Main Screen
DOWN Arrow Button
UP Arrow Button
CHECK MARK(Accept) Button
Installation & User’s Manual
SL SUNLED 10 LED Luminaires
9

Press “Edit a Preset” button to access Preset Select.
Press “Edit a Chase” button to access Chase.
Press Address quick access button to access Settings.
Use LEFT and RIGHT arrow buttons to scroll through all presets
and select Preset x(1 thru 31).
Use UP and DOWN arrow buttons to scroll through all menus,
including Master Intensity, Total Steps, Speed and FadeTime.
Press CHECK MARK(OK)button to select a figure.
The figure selected will be highlighted.
Use LEFT and RIGHT buttons to select through Pixel 1 to 10.
Once at desired menu, use LEFT and RIGHT arrow buttons to
adjust parameter value as desired. Once all values are adjusted as
desired, press CHECK MARK(OK)button.
Once at desired figure, use UP and DOWN arrow buttons to
adjust parameter value as desired. Once all values are adjusted as
desired, press CHECK MARK(OK)button.
Use DOWN arrow button to select Master Intensity.
Use LEFT and RIGHT arrow button to select between the 3 figures.
The figure selected will be highlighted.
When at desired pixel, use the UP and DOWN button to adjust the intensity.
DMX Address Button
Note: For more information about Preset, Settings and Status, please refer to “ LED LuminaireSL SUNLED 10
Menu Tree” on page 11.
Edit a Pres et
Edit a Chas e
Address
Mas ter Int ensit y
Master Intensity
Total S teps
Spe ed
Fad e Time
25 %
25 %
Pre set: 30
Bui lt-in C hase: 1
7.5 s
100%
8
Step 7. When all the parameters are set, press the CHECK MARK(OK)button to save the preset.
Use LEFT and RIGHT buttons to select the desired pixel.
Edit a Preset
Edit a Chase
Address
028
3. Quick Selection Buttons
When in Manual Mode, the SL SUNLED 10 can be accessed via the on-board LCD menu system or via three
quick select buttons:
Edit a Preset Button
To edit and save a Preset:
To edit and save a Chase:
To edit and save a DMX Address
Edit a Preset Button
Edit a Chase Button
Edit a Chase Button
DMX Address Button
Step 1.
Step 1.
Step 1.
Step 2.
Step 2.
Step 2.
Step 3.
Step 3.
Step 3.
Step 4.
Step 4.
Step 5.
Step 6.
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires
10

4. SL SUNLED 10 LED Luminaire Menu Tree
Figure 8: SL SUNLED 10 LED Luminaire Menu Tree
Installation & User’s Manual
SL SUNLED 10 LED Luminaires
11

5.Dimming Curve Selection
Through the menu, you are able to select one of four dimming curves:
Linear Curve
S_Curve
Square Curve
Figure 9: SL SUNLED 10 LED Luminaire Dimmer Curves
*PL Curve follows the dimming curve of Philips Selecon PL
series LED luminaries.
DMX Value
Lumen Output
0
Linear Curve
DMX Value
Lumen Output
0
S_Curve
DMX Value
Lumen Output
0
Square Curve
DMX Value
Lumen Output
0
PL_Curve *
PL_Curve
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires
12

6.Master / Slave Operational Mode
The Master / Slave Operational Mode allows one SL SUNLED 10 LED Luminaire to act as the "Master"
unit and all other connected units are controlled by this unit. When a unit is set to "Slave" mode, it will only listen
to and follow any commands sent from a "Master" unit. Only one "Master" unit is allowed in this type of operation.
To setup a master / slave network:
Step 1.Set the first device in the DMX512 chain to M a ster Mode through the unit’s menu system.
Step 2.Set all other connected units to S l a ve Mode
.
Step 3.The master unit can be controlled via DMX512, R D M or through standalone operation (self-contained
network utilizing on-board effects). The slave units will mimic the master unit’s operation in all cases.
Note:
For SL SUNLED 10 LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 14.
Figure 10: SL SUNLED 10 LED Luminaire - Master / Slave Configuration
Master Unit Slave Unit Slave Unit
Installation & User’s Manual
SL SUNLED 10 LED Luminaires
13
DMX512
DMX512 (out from first
to second luminaire)
DMX512 (out to the next
luminaire or DMX512
controlled device)
(from console or
control device)

1. CHASE
DMX CONTROL
2.Three Channel Mode
Table 4 provides DMX channel mapping of all DMX512 control values when the SL SUNLED 10 LED Luminaire is in Three
Channel mode (as set by the luminaire’s menu system).
Table 4: SL SUNLED 10 LED Luminaire DMX Channel Mapping (Three Channel Mode)
18 bit control for Intensity of LED settings.
Strobe's duration, Range is 0-255
White light mode (when strobe rate is also at 255)
Please refer to the Strobe Duration Detail
Strobe rate slow to fast.
White light mode (when strobe duration is also at 255)
Please refer to the Strobe Rate detail.
Intensity
Strobe Duration
Strobe Rate
2
3
This section contains information for CHASE of the luminaire. The figure below shows the ON/OFF status of each
each step thru Program 1-10 for all the LEDs. Detailed Chase Speed please refer to the SL SUNLED 10
CHASE SPEED DETAILS on page 15.
Figure 11: SL SUNLED 10 LED Luminaire - CHASE
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires
14

Table 3: SL SUNLED 10 LED Luminaire CHASE SPEED Detail
Table 3 provides Chase Speed details of SL SUNLED 10 LED Luminaire.
2. CHASE SPEED
151 21s
SPEED SPEED
TIME(Sec) TIME(Sec)
60s
49 99 0.2s 22s
48 98 0.3s 22.5s
47 97 0.4s 23s
46 96 0.6s 23.5s
45 95 0.8s 23s
44 94 1.0s 23.5s
43 93 1.2s 24s
42 92 1.5s 24.5s
41 91 2.0s 25s
40 90 2.5s 25.5s
39 89 3.0s 26s
38 88 3.5s 26.5s
37 87 4.0s 27s
36 86 4.5s 27.5s
35 85 5s 28s
34 84 5.5s 28.5s
33 83 6s 29s
32 82 6.5s 29.5s
31 81 7s 30s
30 80 7.5s 31s
29 79 8.0s 32s
28 78 8.5s 33s
27 77 9s 34s
26 76 9.5s 35s
25 75 10s 36s
24 74 10.5s 37s
23 73 11s 38s
22 72 11.5s 39s
21 71 12s 40s
20 70 12.5s 41s
19 69 13s 42s
18 68 13.5s 43s
17 67 13s 44s
16 66 13.5s 45s
15 65 14s 46s
14 64 14.5s 47s
13 63 15s 48s
12 62 15.5s 49s
11 61 16s 50s
10 60 16.5s 51s
959 17s 52s
858 17.5s 53s
757 18s 54s
656 18.5s 55s
555 19s 56s
454 19.5s 57s
353 20s 58s
252 20.5s 59s
50 100 0.1s 21.5s
Installation & User’s Manual
SL SUNLED 10 LED Luminaires
15

Table 4: SL SUNLED 10 LED Luminaire DMX Channel Mapping (Four Channel Mode)
Table 4 provides all the DMX Map details of SL SUNLED 10 LED Luminaire.
3. DMX Map
15
10
11
12
13
14
5
6
7
8
9
DMXChannel
1
2
3
4
PlayMode
Master
LED8
Program
LED3
LED3LED2
LED7
LED7LED6
6/8Bit
LED1
LED1
LED1&5
15/8bit
MasterMaster
LED2
Master
Program
LED5
LED5
Program
LED4
LED4
FadeTime
FadeTimeLED6
Speed
FadeTime
Play Mode
LED9
Speed
LED9
LED10
FadeTime
LED10Play Mode
Program
Speed
LED8
LED1&2
LED3&4
LED5&6
LED7&8
LED9&10
LED6&10
10/8Bit Pixel/8Bit 7/8Bit
LED1&10
Speed
PlayMode
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires
16

0--100%
Play Mode PlayMode Play Mode
DMX0--100%Map
0--100%Fadetime
FadeTime 0--255 0--100%
ControlprogramFadeTime.
Controlprogramrunspeed.
DMX0-80Stop
DMX81-160Pause
DMX161-255Play
Controlchaseplay
DMX45--49
0--255Speed
0--255Program
Thesmaller,theslower.
Thelarger,thefaster.
DMX0--4
DMXvaluemapFunction
DMX25--29
DMX5--9
DMX100--104
DMX105--109
DMX110--114
DMX145--149
DMX150--154
0--100%
DMX80--84
DMX85--89
DMX90--94
DMX95--99
DMX70--74
DMX75--79
DMX60--64
DMX65--69
DMX50--54
DMX55--59
DMX35--39
DMX30--34
DMX40--44
DMX115--119
DMX120--124
DescriptionParameter DMXRange Range %
Pixels 0--255 0--100%
IntensityMaster
PixelIntensity
0--100%Master 0--255
DMX130--134
DMX135--139
DMX140--144
DMX250--255
DMX215--219
DMX220--224
DMX225--229
DMX230--234
DMX235--239
DMX155--159
DMX160--164
DMX10--14
DMX15--19
DMX20--24
DMX240--244
DMX245--249
DMX190--194
DMX195--199
DMX200--204
DMX205--209
DMX210--214
DMX165--169
DMX170--174
DMX175--179
DMX180--184
DMX185--189
DMX125--129
PixelDimmer
PresetOFF
Preset1
Preset30
Preset 29
Preset 28
Preset 27
Preset 26
Preset 25
Preset 24
Preset 23
Preset 22
Preset 21
Preset 20
Preset 19
Preset 18
Preset 17
Preset 16
Preset 15
Preset 14
Preset 13
Preset 12
Preset11
Preset 10
Preset 9
Preset 8
Preset 7
Preset 6
Preset 5
Preset 4
Preset 3
Preset2
Preset 31
Chase1
Chase9
Chase8
Chase7
Chase6
Chase5
Chase4
Chase3
Chase2
Chase10
UserChase1
UserChase2
UserChase3
UserChase4
UserChase5
UserChase6
UserChase7
UserChase8
Table 5: SL SUNLED 10 LED Luminaire DMX Channel Mapping (Four Channel Mode)
Table 5 provides all the DMX Map details of SL SUNLED 10 LED Luminaire.
4. DMX Detail
Installation & User’s Manual
SL SUNLED 10 LED Luminaires
17

5. SL SUNLED 10 LED Luminaire RDM Parameter IDs
The following tables outline and describe all the RDM parameters IDs associated with SL SUNLED 10
Table 6, “SL SUNLED 10 LED Luminaire RDM Product Parameters IDs”
Table 7, “ SL SUNLED 10 LED Luminaire RDM UID”
Table 8, “ S L SUNLED 10 LED Luminaire RDM Parameters IDs,”on page18
Table 9, “ S L SUNLED 10 LED Luminaire RDM Manufacturer Status IDs,”on page19
Table 10 , “SL SUNLED 10 LED Luminaire RDM Manufacturer Specific PIDs for Root Device,”on page 20
Table 6: SL SUNLED 10 LED Luminaire RDM Product Parameters IDs
Model ID Manufacturer Model Description Product Category
Showline SL SUNLED 10 0x0509
Table 7: SL SUNLED 10 LED Luminaire RDM UID
UID
MSB of ESTA
29H
LSB of ESTA
B4H
MSB OF
Unique Seq.
LSB of
Unique Seq.
MSB of
Unique Seq.
LSB of
Unique Seq.
0x1200
LED Luminaires.
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires
18