Philips AD713/05 User manual

Register your product and get support at
www.philips.com/welcome
AD713
EN User manual

3
English
EN
Contents
1 Important 3
2 Your Docking Entertainment System 5
Introduction 5
What's in the box 5
Overview of the main unit 5
3 Get started 7
Connect power 7
Synchronize time with iPod/iPhone 7
4 Play from iPod/iPhone 8
Compatible iPod/iPhone 8
Listen to audio from iPod/iPhone 8
Remove the iPod/iPhone 8
Charge the iPod/iPhone 8
Adjust volume 8
5 Other features 9
Play audio from an external device 9
Set sleep timer 9
Adjust display brightness 9
6 Product informatio 10
10
7 Troubleshooting 10
8 Notice 12

4EN
1 Important
• Read these instructions.
• Follow all instructions.
• Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
ampliers)thatproduceheat.
• Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the unit.
• Only use attachments/accessories
speciedbythemanufacturer.
• Unplug this unit during lightning storms
or when unused for long periods of
time.
• Referallservicingtoqualiedservice
personnel. Servicing is required when
the unit has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus,
the unit has been exposed to rain or
moisture, does not operate normally,
or has been dropped.
• The unit shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on
theunit(e.g.liquidlledobjects,lighted
candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect
device, the disconnect device shall
remain readily operable.

5
English
EN
2 Your Docking
Entertainment
System
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from iPod/
iPhone or an external device.
What's in the box
Check and identify the contents of your
package:
• Main unit
• Power adapter
• Quick start guide
• Safety sheet

6EN
Overview of the main unit
a
b
c Dock for iPod/iPhone
d VOLUME +/-
e
g
f
d
a
b
c
VOL UME S LE EP
DO C K fo r
PM
3
-KN
IL
10V 1.8A
DC IN
e SLEEP
f MP3-LINK
g DC IN

7
English
EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
•Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the unit.
•Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Warning
•Toreducetheriskofreorelectricshock,donot
expose this device to rain or moisture.
Connect the power adapter to:
• the DC IN socket at the back of the device.
• the power socket.
Tip
•The type plate is located on the bottom of the device.
Synchronize time with iPod/
iPhone
When the docking system is connected to
power and an iPod/iPhone is docked, the
docking system synchronizes time with the
iPod/Phone automatically.
» Time is stored in the docking system even if
the ipod/iPhone is disconnected.
Set time format
1 Press and hold for 2 seconds.
» [12H] or [24H] is displayed.
2 Press VOLUME +/- repeatedly to select 12
or 24 hour format.
3 Press toconrm.

8EN
4 Play from iPod/
iPhone
You can enjoy audio from iPod/iPhone through
this unit.
Compatible iPod/iPhone
The docking system supports these iPod and
iPhone models:
Made for.
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod classic
• iPod with video
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
• iPod with color display
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
Listen to audio from iPod/
iPhone
1 Place an iPod/iPhone in the dock.
2 Play audio from the iPod/iPhone.
Tip
•To pause/resume play, press .
•In iPod/iPhone mode, if an external audio device is
connected, the device switches to MP3 Link mode.
Remove the iPod/iPhone
Pull the iPod/iPhone out of the dock.
Charge the iPod/iPhone
When the device is connected to power, the
docked iPod/iPhone starts charging.
Adjust volume
To adjust volume, press VOLUME +/-
repeatedly.

9
English
EN
5 Other features
Play audio from an external
device
You can listen to audio from an external device
through this docking system.
1 Connect the MP3 link cable (not supplied)
to:
• the MP3-LINK socket.
• the headphone socket of an external
device.
2 Play tracks in the external device (see the
device's user manual).
Set sleep timer
This docking system can be switched off
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF] (off) appears.
Adjust display brightness
Press repeatedly to select different brightness
levels.
15 30 60 90 120
OFF

10 EN
6 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 20W RMS
General information
AC Power Model: AS190-100-
AI180;
Input: 100-240 V ~,
50/60Hz, 0.7A;
Output: 10V 1.8A
Operation Power
Consumption
<12 W
Standby Power
Consumption
<2 W
Max. Load for iPod/
iPhone
5 V, 1 A
Dimensions
- Main Unit
(WxHxD)
290 x 158 x 113 mm
Weight
- With Packing
- Main Unit
1.97 kg
1.47 kg

11
English
EN
7 Troubleshooting
Warning
•Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).Whenyoucontact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•Ensure that the AC power plug of the unit
is connected properly.
•Ensure that there is power at the AC
outlet.
No sound
•Adjust the volume.
No response from the unit
•Disconnect and reconnect the AC power
plug, then turn on the unit again.