Philips AD385/93 User manual

Register your product and get support at
User manual
AD385/93
www.philips.com/support
Always there to help you
Question?
Contact
Philips

2EN
Contents
1 Safety and Notice 3
Safety 3
Notice 3
2 Your Docking Speaker 4
Introduction 4
What's in the box 4
Overview of the main unit 5
3 Get started 5
Connect power 5
Turn on 6
4 Play 6
Play from iPod/iPhone 6
Play from Bluetooth device 7
Play from an external device 7
Adjust volume 7
5 Specications 8
Amplier 8
Bluetooth 8
General information 8
6 Troubleshooting 8
About Bluetooth device 8

3EN
1 Safety and
Notice
Read and understand all instructions before you
use this product. If damage is caused by failure
to follow the instructions, the warranty does
not apply.
Safety
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never look into the laser beam inside this apparatus.
•Never place this apparatus on other electrical
equipment.
•Keep this apparatus away from direct sunlight, naked
amesorheat.
•Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
• The device shall not exposed to dripping
or splashing.
• Do no place any source of danger on the
device(e.g.liquidlledobjects.litcandles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Make sure that there is enough free space
around the product for ventilation.
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• The batteries should not be exposed to
excessiveheatsuchassunshinereorthe
like.
• Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
• Only use power supplies listed in the user
manual.
Notice
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
Environmental information

4EN
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separateintothreematerials:cardboard(box),
polystyrenefoam(buffer)andpolyethylene
(bags,protectivefoamsheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The making of unauthorized copies of copy-
protected material, including computer
programs,les,broadcastsandsoundrecordings,
may be an infringement of copyrights and
constitute a criminal offence. This equipment
should not be used for such purposes.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone respectively, and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Note
•The type plate is located on the bottom of the
apparatus.
2 Your Docking
Speaker
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this docking speaker, you can enjoy audio
from the iPod/iPhone, Bluetooth devices, and
other external audio devices.
What's in the box
Check and identify the contents of your
package:
• Main unit
• 1 x AC adaptor
• Short user manual

5EN
Overview of the main unit
a iPod/iPhone dock
b
• Turn on/off the unit.
c DC IN
• Power supply socket.
d AUDIO IN
• Connect an external audio device.
e VOLUME
• Adjust volume.
f
• Enable or disable Bluetooth function.
c
d
e
f
a
b
3 Get started
Caution
•Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
bottom of the apparatus.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power
Caution
•Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adaptor to:
• the power socket at the back of the
docking speaker.
• the wall socket.
DC IN

6EN
Turn on
Press to turn the docking speaker on.
» The LED indicators light up.
Switch to standby mode
The docking speaker switches to standby mode
in the following situation:
• Press again;
• The speaker is idle for 15 minutes
when powered by AC supply.
» The LED indicator lights off.
4 Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
• iPodtouch(5thgeneration)
• iPodnano(7thgeneration)
• iPhone 5
Listen to the iPod/iPhone
1 Press to turn the docking speaker on.
» The LED indicators light up.
2 Insert the iPod/iPhone into the dock.
3 Play audio on your iPod/iPhone.
» Audio comes out through this docking
speaker.

7EN
Charge the iPod/iPhone
When the docking speaker is connected to
AC power, the docked iPod/iPhone begins to
charge.
Play from Bluetooth device
Note
•The effective operation range between the docking
system and the paired device is approximately 10
meters(30feet).
•Keep this docking speaker away from other electronic
devices that may cause interference.
1 Press to select Bluetooth source.
» The Bluetooth indicator blinks.
2 Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
3 Select “PHILIPS AD385” displayed on your
device for pairing.
» If connection is successful, the
docking speaker beeps twice, and the
Bluetoothindicatorstopsashing.
• For some devices, you need to input
"0000" as pairing password.
4 Start music play on your Bluetooth device.
Play from an external device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
•Make sure that there is no audio detected from docking
connector in the speaker.
1 Press to turn the docking speaker on.
2 ConnecttheMP3linkcable(notsupplied)
to:
• the AUDIO-IN socket at the back of
the docking speaker.
• the headphone socket on an external
device.
3 Play audio on the device (see the device's
usermanual).
Adjust volume
To adjust volume:
• Press +/- on your docking speaker; or
• Adjust the volume control of your
iPod/iPhone or external device.

8EN
5 Specifications
Amplier
Rated Output Power 2 X 4 W RMS
Bluetooth
Standard Bluetooth Standard
Version 2.1+EDR
Output power 0dBm(Class2)
Frequency band 2.402 ~ 2.480
GHzISM Band
Range 10m(freespace)
General information
Power supply
- AC Power
- Battery
Model:(KTEC)KSAS-
B0241200150HC ;
Input: 100-240 V
~50/60Hz, 0.6A;
Output: 12 V 1.5 A
Li-ion polymer internal
rechargeable battery
7.4V/10WH
Operation Power
Consumption
<17 W
Standby Power Con-
sumption
<0.5 W
Max. load for iPod/
iPhone
5 V 1 A
Dimensions
- Main Unit
(WxHxD) 300 x 119 x 164 mm
Weight
- Main Unit 1.45 kg
Operation tempera-
ture and humidity
0°C to 45°C, 5% to
90% Humidity for all
climates.
Storage temperature
and humidity
-40°C to 70°C , 5% to
95%
6 Troubleshooting
Warning
•Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).Whenyoucontact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•Make sure that the docking speaker is fully
charged.
•Make sure that the AC power plug of the
unit is connected properly.
•Make sure that there is power at the AC
outlet.
No sound
•Adjust the volume.
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
•The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
•Thedevicedoesnotsupporttheproles
required for the system.
•The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.

9EN
•The system is not in the pairing mode.
•The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired device connects and disconnects
constantly.
•The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
•For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
No response from the unit
•Disconnect and reconnect the AC power
plug, then turn on the docking speaker
again.

Specifications are subject to change without notice
2014 © WOOX Innovations Limited.All rights reserved.
Philips and the Philips’Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used byWOOX Innovations Limited under license from
Koninklijke Philips N.V.
AD385_93_UM_V3.0