Philips DC350/12 User manual

DC350
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote control
1
Quick Start Guide
2
User Manual
User Manual
Quick Start Guide
1 x MP3 link cable
AC power adaptor
1 x Mini USB cable
DC350_12_QSG_Eng.indd 1DC350_12_QSG_Eng.indd 1 11/7/2008 1:52:48 PM11/7/2008 1:52:48 PM

1
Connect the AC power
adaptor to the DC350 and
the wall socket.
1
2
4
6
3
5
Press and hold SET TIME for 2 seconds.
Press 2; repeatedly to select 12 hour or 24 hour format.
Press SET TIME to confirm.
The hour digits are displayed and begin to blink.
Press ∞/§to set the hour.
Press SET TIME to confirm.
The minute digits are displayed and begin to blink.
Repeat steps 4-5 to set minute, year, month and day.
«
«
Set clock and date
DC350_12_QSG_Eng.indd 2DC350_12_QSG_Eng.indd 2 11/7/2008 1:52:51 PM11/7/2008 1:52:51 PM

6
5
4
3
2
Press TUNER to select FM.
Press and hold ∞/§for more than 2 seconds.
The radio tunes to a station with strong reception automatically.
Press and hold PROG for 2 seconds to activate program mode.
“PR01” blinks on the display.
Press PRESET +/- to allocate a number (1 to 40) to this radio station,
then press PROG to confirm.
Repeat the steps 2-4 to program other stations.
Press PRESET +/- to select a preset number.
«
«
3
1
2
Play from iPod/iPhone
With the connectors facing each other, place the
iPod/iPhone in the dock.
Turn the tilt adjustment control to adjust the angle at
which the iPod/iPhone tilts.
When the DC350 is connected to power, the
docked iPod/iPhone begins to charge.
Press iPod/iPhone to select iPod/iPhone source.
The connected iPod/iPhone plays automatically.
«
«
1
Listen to radio
DC350_12_QSG_Eng.indd 3DC350_12_QSG_Eng.indd 3 11/7/2008 1:52:52 PM11/7/2008 1:52:52 PM

1
2
3
4
Press BLUETOOTH to select the Bluetooth source.
[BT] (Bluetooth) is displayed.
Press and hold PAIRING for more than 3 seconds.
[PAIRING] (Pairing) is displayed, and the Bluetooth indicator blinks.
On the device, set up the Bluetooth connection:
Enable Bluetooth to search for other Bluetooth devices. (Refer to the
user manual on how to enable the function.)
When “ PHILIPS DC350” is recognized and displayed, select it to start
to connect.
When prompted for a password, enter “0000”.
Wait until you hear a double beep from the DC350.
The connection is completed, and the Bluetooth indicator turns on.
«
«
«
«
«
«
Use Bluetooth devices
Note:
The operational range between this DC350 and a bluetooth
device is approximate 10 meters (30 feet).
Connect a device for the first time
Note:
You can receive phone calls through this DC350 with devices
that support the HFP or HSP profile.
Receive a phone call
1
Connect the Bluetooth device.
DC350_12_QSG_Eng.indd 4DC350_12_QSG_Eng.indd 4 11/7/2008 1:52:53 PM11/7/2008 1:52:53 PM

2
4
3
2
CRoyal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com PDCC-JH/ZYL-0845
When a call is received, you hear the incoming call alert tone. Press
PAIRING to accept the call.
To reject the call, press .
Speak into the MIC located on the front panel.
To select to hear the audio from the device or from the DC350, press
PAIRING .
Press to end the call.
«
«
Listen to music
1
Connect the Bluetooth device.
On the Bluetooth device, start play.
You hear the music through this DC350.
«
Note:
You can listen to audio through this DC350 from devices that
support A2DP or AVRC.
Tip:
Refer to the supplied user
manual for more details.
DC350_12_QSG_Eng.indd 5DC350_12_QSG_Eng.indd 5 11/7/2008 1:52:54 PM11/7/2008 1:52:54 PM