Philips DC350/37B User manual

DC350
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote control
1
Quick Start Guide
2
User Manual
User Manual
Quick Start Guide
1 x MP3 link cable
AC power adaptor
1 x Mini USB cable
DC350_37_QSG_Eng.indd 1DC350_37_QSG_Eng.indd 1 12/23/2008 6:12:33 PM12/23/2008 6:12:33 PM

1
Connect the AC power
adaptor to the DC350 and
the wall socket.
1
2
4
6
3
5
Press and hold SET TIME for 2 seconds.
The hour digits are displayed and begin to blink.
«
Press ∞/§to set the hour.
Press SET TIME to confirm.
The minute digits are displayed and begin to blink.
«
Repeat steps 2-3 to set minute, year, month and day.
Press ∞/§repeatedly to select 12 hour or 24 hour format.
Press SET TIME to confirm.
Set clock and date
DC350_37_QSG_Eng.indd 2DC350_37_QSG_Eng.indd 2 12/23/2008 6:12:37 PM12/23/2008 6:12:37 PM

3
2
Press TUNER to select FM.
In the tuner mode, press and hold PROG for more than 2
seconds to activate automatic program mode.
[AUTO] (auto) is displayed.
«
All available stations are programmed in the order of
«
waveband reception strength.
The first programmed radio station is broadcast
«
automatically.
Press PRESET +/- to select a preset number.
3
1
2
Play from iPod/iPhone
With the connectors facing each other, place the
iPod/iPhone in the dock.
Turn the tilt adjustment control to adjust the angle at
which the iPod/iPhone tilts.
When the DC350 is connected to power, the
«
docked iPod/iPhone begins to charge.
Press iPod/iPhone to select iPod/iPhone source.
The connected iPod/iPhone plays automatically.
«
1
Listen to radio
DC350_37_QSG_Eng.indd 3DC350_37_QSG_Eng.indd 3 12/23/2008 6:12:38 PM12/23/2008 6:12:38 PM

3
2
1
4
5
Press BLUETOOTH to select the Bluetooth source.
For an iPhone, load it in the dock for automatic re-connection setup.
Press and hold PAIRING for more than 3 seconds.
The Bluetooth indicator blinks.
«
On the device, set up the Bluetooth connection:
a. Enable Bluetooth to search for other Bluetooth devices. (Refer to the
device user manual on how to enable the function.)
b. When “ PHILIPS DC350” is recognized and displayed, select it to start to
connect.
c. When prompted for a password, enter “0000”.
Wait until the Bluetooth indicator turns on.
The connection is complete.
«
Use Bluetooth devices
Note:
The operational range between this DC350 and a bluetooth
device is approximate 10 meters (30 feet).
Connect a device for the first time
Note:
You can receive phone calls through this DC350 with devices
that support the HFP or HSP profile.
Receive a phone call
1
Connect the Bluetooth device.
DC350_37_QSG_Eng.indd 4DC350_37_QSG_Eng.indd 4 12/23/2008 6:12:38 PM12/23/2008 6:12:38 PM

2
4
3
2
CRoyal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com PDCC-JH/ZYL-0852
When a call is received, you hear the incoming call alert tone,
press PAIRING to accept the call.
To reject the call, press
«.
Speak into the MIC located on the front panel.
To select to hear the audio from the device or from the DC350, press
«
PAIRING .
Press to end the call.
Listen to music
1
Connect the Bluetooth device.
On the Bluetooth device, start play.
You hear the music through this DC350.
«
Note:
You can listen to audio through this DC350 from devices that•
support A2DP or AVRCP.
As iPhone doesn’t support Bluetooth audio streaming, DC350•
doesn’t play audio files from iPhone through Bluetooth connection.
Tip:
Refer to the supplied user
manual for more details.
DC350_37_QSG_Eng.indd 5DC350_37_QSG_Eng.indd 5 12/23/2008 6:12:39 PM12/23/2008 6:12:39 PM