ServiceManual
Philips DomesticAppliances and Personal Care
Published by Philips DomesticAppliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Shaver
8160XL
Corona
06/09
PRODUCT INFORMATION
General:
- Mains/rechargeable operation
- World-wide automatic voltage selection
- Electronic on/off button
- Washable
Safety information
- This product meets the requirements regarding
interference suppression on radio andTV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage : 100 - 240 Volt / 50- 60 Hz
- Motor voltage : 3,6 Volt
- Shaving heads : HQ9 - 4222 036 11150
- SAP coding : 8160XL
DISASSEMBLY-AND RE-ASSEMBLYADVICE
Disassembly:
- Remove shaving unit, to prevent damaging during
repairing.
- Remove the 2 screws Aon the backside of the shaver.
- Remove the 2 screws Bout of the hairchamber.
- Remove the hairchamber from the body.
- Remove the cover.
- Take out the basic body.
- Remove the 3 screws Con the cover side off the basic body.
- Remove the cover from the basic body.
- Remove the mains from the motor by turning and pulling
the wires out of the motor.
- Remove the driving unit by pushing the motor.
REPAIR INSTRUCTION
- No specific issues
OPTIONAL (accessories)
- Pouch ME : 4222 036 11500
- Pouch Halley : 4222 036 11460
- Washing machine : 4222 036 11660
- Washing machine Jet clean II : 4222 036 13990
- Cleaningroom-assy : 4222 036 11580
- Container-assy : 4222 036 11620
- Container-plug-assy : 4222 036 12320
Shaving Performance:
If customers complain about poor shaving performance
of the triple-track shaving heads, replacing the driving
unit is recommended.
= changed
