Philips Easy Shave HQ6849 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Shaver
HQ6849
Easy Shave
07/12
PRODUCT INFORMATION
Shaving system
- 3-dimentional contour following system
- Lift & Cut system
- Individually floating heads
- Three Super Reflex Action shavingheads HQ55
- Silent power
- Hair collecting chamber
Power system
- Rechargeable
- Mains operation possible
- 1 hour charge time
- Up to 30 minutes cordless shaving time
- Quick charge in 6 minutes for 1 cordless shave
- World-wide automatic voltage selection
Features
- Travel pouch
- Pop-up trimmer
Luxe
***
Safety information
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage : 100-240 V AC 50-60 Hz
- Power consumption : Motor depending
- Motor Voltage : 1,2 V
- Power system : Rechargeable
: corded operation possible
- Shaving heads : HQ55 - 4222 036 08370
- Charging indication : 1 led green
- SAP coding : HQ6849
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- Remove shaving unit, to prevent damages during repairs.
- Remove the screws A1 (2x).
- Remove cover. (See Fig. 1)
- To remove the trimmer, first
disassemble the trimmer slide
by pushing down the locking
pegs (2 x “X” in exploded view)
and move the slide slightly
outwards.
- Make room between trimmer
and cover with a small screw-
driver (“Y” in exploded view).
- Remove screws B1 (2 x).
- The PC-board with motor and
hairchamber can now be removed from the housing.
- Detach the motor clamping springs (item 17) on the
bearing block with a small screwdriver
OPTIONAL (accessories)
- Pouch - 4222 036 08450
Fig. 1

HQ6849
EXPLODED VIEW & PARTS LIST
A1
Ni-Cd
B1
14
19
20
21
18
22
6
5
4
3
2
1
7
8
12
16
17
15
10
9
11
13
X
Y
2-3
Pos Service code Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
4222 036 05430
4222 036 09010
4222 036 08370
4222 036 05460
4222 036 08380
4822 466 10937
4222 036 08390
4222 036 08590
4222 036 08600
4222 036 08940
4222 036 05650
4822 479 30183
4222 036 08650
4222 036 05550
4822 138 10633
protecting cap
bracket
HQ55 shaving head
holder assy
hair chamber complete
dust seal
on/off knob
panel EUR
panel NOR
housing
on/off slide assy
cleaning brush
printed circuit board
inlet
AA NiCd cell
Pos Service code Description
15
16
17
18
19
20
21
22
4822 522 33605
4822 361 10959
4822 492 71735
4222 036 08420
4822 466 12153
4222 036 05670
4222 036 05730
4822 321 10344
4822 321 10096
4222 036 02480
4822 321 10095
4822 502 30526
4222 036 08450
4222 036 08620
pinion
motor assy
motor spring
trimmer assy
foam
connecting strip
cover
flex assy USA
flex assy GBR
flex assy KOR
flex assy EUR
screw (torx-slot)
pouch EUR
pouch NOR

HQ6849
Old to new PCB
You can use the PCB with service code 4222 036 13300
Give consideration to the following steps:
Cut the connecting strip
Place a new Battery on the PCB.
You can’t use the old Battery (the new PCB is a one hour charging PCB).
Place the new PCB and connect the wires to the old connecting strip.
REPAIR INSTRUCTION
3-3
= changed