Philips HQ-T 388 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
BeardTrimmer
HQ-T 388
PRODUCT INFORMATION
Features :
- Adjustable attachment comb for even cutting result.
- Adjustable to 9 different beard lengths up to 18 mm.
- Stubble setting for 1.5 mm stubble beard.
- Easy length adjustment by zoom ring construction.
- Length indication window.
- Maintenance free cutting element - no oiling required.
- Precision pop-up trimmer.
- Green pilot light to indicate charging.
- Mains operating possible when batteries are empty.
TECHNICAL DATA
Power system : rechargeable
Batteries : 1 x AA NiCd
Charging period : 10 hours
Capacity : 40 minutes
Voltage : 100 - 240Volt / 50 -60 Hz
4322 277 00040
99/12
PCS 101 335
Product meets the requirements regarding
interference suppression on radio andTV.
NOTES :
In order to guarantee the longest possible working life of
the battery :
- Do not charge for more than 24 hours.
- Do not keep the cord permanently plugged in.
- A weaker motor sound indicates that the rechargeable
battery will be empty soon.
- Only plug in the cord when you hear this weaker sound.
- Discharge the battery completely once a year by letting the
motor run until it stops.
- If you haven’t used the appliance for a long period,
charge it before use.
If the battery is completely empty the trimmer might not
start immediately. In this case switch off the product, charge
for one minute and switch again.

PCS 101 335
DISASSEMBLY ADVICE
to replace SPRING ON/OFF
SWITCH (4)
to replace BATTERY (6)
PCB (7)
remove SCREW A
N.B. Never use again a deformed trimmer clamp (10).
Before reassembling the battery holder, make sure that the
internal wiring is guided.
After the product has been repaired, it should function properly
and has to meet the safety requirements as laid down and officially
established at this moment.
to replace ZOOM RING +
GUIDE PART (8)
SPRING ZOOM RING (9)
SPRING POP-UP
TRIMMER (11)
POP-UP TRIMMER (12)
remove COMB (1)
remove CUTTER (2)
remove TRIMMER CLAMP (10) 5 mm
0.5 mm
± 80 mm
Prepare a disassembly tool of a metal strip.
Insert the disassembly tool into the small
gap on the rear side of the product.
1
2
Turn and push the zoom ring as shown in
the picture.

EXPLODED VIEW + PARTS LIST HQ-T 388
Pos Description Service code
Comb
Cutter
Cleaning brush
Spring ON/OFF switch
Slide ON/OFF switch
Battery (NiCd)
PCB 110 - 240Volt (NiCd battery included)
Zoom ring + guide part
Spring zoom ring
Trimmer clamp
Spring pop-up trimmer
Pop-up trimmer, spring (11) included
Cord set (Euro)
Cord set (UK)
Cord set (CND)
Cord set (Aus/NZ)
Cord set (USA)
Pouch
Dir. for use: UK, D, S, N, SF, DK, GR
Dir. for use: UK, D, F, NL, E, P, I,TR
Dir. for use: UK, Russian, Polish, Estonian, Latvian, Lithuanian
Dir. for use: UK, Russian, Ukrainian, Croatian, Slovenian, Czech,
Slovak, Hungarian, Rumanian
1
2
3
4
5
6
7
8
9
10
11
12
13
14
4203 035 72190
4822 690 10174
4822 479 30183
4822 492 71508
4822 277 11808
4822 138 10336
4203 035 72210
4203 035 71430
4203 035 71380
4203 035 72280
4203 035 72200
4203 035 71440
4822 321 10095
4822 321 10096
4822 321 10097
4822 321 10148
4822 321 10344
4203 035 72180
4203 035 72240
4203 035 72250
4203 035 72260
4203 035 72270
A
8
9
10
2
1
5
4
3
14
11
13
7
6
12