Philips PT880 User manual

Register your product and get support at
www.philips.com/welcome
PT880, PT860, PT735, PT730, PT725, PT720

1

PT880, PT860, PT735, PT730, PT725, PT720
ENGLISH 6
简体中文 20

6
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
Please read this user manual, as it contains
information about the wonderful features of this
shaver as well as some tips to make shaving easier
and more enjoyable.
General description (Fig. 1)
AProtection cap
BShaving unit
CShaving unit release button
DShaver on/off button
ECharging light
FTrimmer (PT880, PT860 only)
GTrimmer release slide (PT880, PT860 only)
HCleaning brush
IAdapter
Note:You can find the type number on the back of
the shaver.
Important
Read this user manual carefully before you use the
appliance and save it for future reference.
Danger
- Keep the adapter dry.
- This symbol means: Forbidden to clean under a
running tap.
ENGLISH

Warning
- The adapter contains a transformer. Do not cut
off the adapter to replace it with another plug, as
this causes a hazardous situation.
- The appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
- Children should be supervised to ensure that they
do not play with the appliance.
- Always unplug the shaver before you clean it
under the tap.
- This symbol means: Forbidden to use in the
shower.
- Warning: Do not use this appliance close to a
bathtub, shower or other containers filled
with water.
Caution
- Do not immerse the shaver in water or any
other liquid.
- Do not use water hotter than 80°C to rinse
the shaver.
- Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
- The shaver is not dishwasher-proof.
- Warning: Remove the detachable cord from the
handheld part before cleaning this part in water.
- Water may leak from the socket at the bottom
of the shaver when you rinse it.This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
ENGLISH 7

- Do not use the shaver, adapter or any other part if
it is damaged, as this may cause injury. Always
replace a damaged adapter, charger or part with
one of the original type.
- Use, charge (specific types only) and store the
appliance at a temperature between 10°C and
35°C.
- Always place and use the shaver on a surface that
is fluid-resistant.
- Only use the adapter, charger and accessories
supplied.
- Always put the protection cap on the shaver
to protect the shaving heads when you are
travelling.
Compliance with standards
- This shaver complies with all standards regarding
electromagnetic fields (EMF). If handled properly
and according to the instructions in this user
manual, this shaver is safe to use based on
scientific evidence available today.
- This shaver complies with the applicable IEC safety
standards.
General
- This shaver can be safely cleaned under the tap.
- This symbol means: Suitable to be cleaned under a
running tap.
- The adapter is equipped with an automatic
voltage selector and is suitable for mains voltages
ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe
low voltage of less than 24 volts.
Charging
PT880, PT860: It takes approx. 1 hour to fully charge
the shaver.
ENGLISH8

PT735/PT730/PT725/PT720: It takes approx. 8 hours
to fully charge the shaver.
When you charge the shaver for the first time or
after a long period of disuse, let it charge until the
charging light lights up continuously.
A fully charged shaver provides up to 17 (PT880,
PT860) or 14 (PT735/PT730/PT725/PT720)
cordless shaves.
The shaving time may be less than 17 (PT880,
PT860) or 14 (PT735/PT730/PT725/PT720)
cordless shaves as a result of your shaving behaviour,
your cleaning habits or your beard type.
Charge indications
Battery low
- When the battery is almost empty (when there
are only 5 or fewer shaving minutes left), the
charging light starts to flash orange.
- When you switch off the shaver, the charging light
continues to flash orange for a few seconds.
Quick charging
- When you start charging the empty battery,
the charging light alternately flashes orange and
green. After approx. 3 minutes, the charging light
continues to flash green.The shaver now contains
enough energy for a 5-minute shave.
Charging
- When the shaver is charging, the charging light
flashes green.
Battery fully charged
- When the battery is fully charged, the charging
light lights up green continuously.
Note:After approx. 30 minutes, the charging light goes
out to save energy.
ENGLISH 9

Charging with the adapter
1 Put the small plug in the shaver.
2 Put the adapter in the wall socket.
,The charging light shows the charging status of
the shaver (see section ‘Charge indications’ in
this chapter).
Using the shaver
Note:You can also use the shaver directly from the
mains. Simply connect the shaver to the mains.
Shaving
1 Press the on/off button once to switch on the
shaver.
2 Move the shaving heads over your skin. Make
circular movements.
- Do not make straight movements.
- Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
3 Press the on/off button once to switch off the
shaver.
4 Clean the shaver (see chapter ‘Cleaning and
maintenance’).
Trimming (PT880, PT860 only)
You can use the trimmer to groom your sideburns
and moustache.
1 Press the on/off button once to switch on
the shaver.
ENGLISH10

2 Push the trimmer slide downwards to open
the trimmer.
,You can now start trimming.
3 After trimming, close the trimmer and switch
off the shaver.
Cleaning and maintenance
Warning: Remove the detachable cord from the
handheld part before cleaning this part in water.
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the appliance.
- Clean the shaver after every shave for optimal
shaving performance.
- Regular cleaning guarantees better shaving
performance.
- For the best cleaning results, we advise you to use
the Philips Cleaning spray (HQ110).
- Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
Note:Water may leak from the socket at the bottom
of the shaver when you rinse it.This is normal and not
dangerous because all electronics are enclosed in a
sealed power unit inside the shaver.
ENGLISH 11

Cleaning the shaving unit under the tap
1 Switch off the shaver and disconnect it from
the mains.
2 Press the release button to open the shaving
unit.
3 Rinse the shaving unit and hair chamber under
a hot tap for 30 seconds.
Be careful with hot water.Always check if the
water is not too hot, to prevent your hands from
getting burnt.
- Rinse the hair chamber and the inside of the
shaving unit.
- Rinse the outside of the shaving unit.
4 Close the shaving unit and shake off excess
water.
Be careful not to hit the shaving unit against
anything while shaking off excess water.
Never dry the shaving unit and the hair chamber
with a towel or tissue, as this may damage the
shaving heads and the coupling spindles.
5 Open the shaving unit again and leave it open
to let the shaver dry completely.
Cleaning the shaving unit with the
cleaning brush
1 Switch off the shaver and disconnect it from
the mains.
ENGLISH12

2 Press the release button to open the
shaving unit.
3 Pull the shaving unit off the shaver.
4 Turn the lock anticlockwise (1) and remove the
retaining frame (2).
5 Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a
guard.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance
is restored.
- Remove the cutter from the shaving guard and
clean it with the brush.
2
1
ENGLISH 13

- Clean the inside and outside of the shaving guard
with the brush.
6 Put the shaving heads back into the shaving unit.
PT880, PT860/PT735/PT730: Make sure that the
projections of the shaving heads fit exactly into the
recesses.
7 Put the retaining frame back into the shaving
unit and turn the lock clockwise.
8 Insert the lug of the shaving unit into the slot
in the top of the shaver (1).Then close the
shaving unit (2).
Note: If the shaving unit does not close smoothly, check
if you have inserted the shaving heads properly and if
the retaining frame is locked.
Cleaning the trimmer with the cleaning
brush (PT880, PT860 only)
Clean the trimmer every time you have used it.
1 Switch off the shaver and disconnect it from
the mains.
1
2
ENGLISH14

2 Push the trimmer slide downwards to open
the trimmer.
3 Clean the trimmer with the short-bristled side
of the cleaning brush. Brush up and down along
the trimmer teeth.
4 Close the trimmer (‘ click’).
Tip: For optimal trimming performance, lubricate the
trimmer teeth with a drop of sewing machine oil every
six months.
Storage
- Put the protection cap on the shaver every time
you have used it, to prevent damage.
Replacement
For maximum shaving performance, we advise
you to replace the shaving heads every two years.
Replace damaged shaving heads right away.
Only replace the shaving heads with original HQ8
Philips Shaving Heads.
ENGLISH 15

1 Switch off the shaver and disconnect it from
the mains.
2 Press the release button to open the shaving
unit.
3 Pull the shaving unit off the shaver.
4 Turn the lock anticlockwise (1) and remove the
retaining frame (2).
5 Remove the shaving heads and place new ones
in the shaving unit.
Make sure that the projections of the shaving
heads fit exactly into the recesses.
6 Put the retaining frame back into the shaving
unit and turn the lock clockwise.
7 Insert the lug of the shaving unit into the slot
in the top of the shaver (1).Then close the
shaving unit (2).
Note: If the shaving unit does not close smoothly, check
if you have inserted the shaving heads properly and if
the retaining frame is locked.
Accessories
To retain the top performance of your shaver, make
sure you clean it regularly and replace its shaving
heads at the recommended time.
2
1
1
2
ENGLISH16

Shaving heads
- We advise you to replace your shaving heads
every two years. Always replace with HQ8 Philips
Shaving Heads
Cleaning
- Use Cleaning spray (HQ110) to clean the shaving
heads thoroughly.
Environment
- Do not throw away the appliance with the normal
household waste at the end of their life, but
hand them in at an official collection point for
recycling. By doing this, you help to preserve the
environment.
- The built-in rechargeable shaver battery contains
substances that may pollute the environment.
Always remove the battery before you discard or
hand in the shaver at an official collection point.
Dispose of the battery at an official collection
point for batteries. If you have trouble removing
the battery, you can also take the appliance to a
Philips service centre.The staff of this centre will
remove the battery for you and will dispose of it
in an environmentally safe way.
Removing the rechargeable shaver battery
Only remove the rechargeable battery when you
discard the shaver. Make sure the rechargeable
battery is completely empty when you remove it.
1 Disconnect the shaver from the mains.
2 Let the shaver run until it stops.
ENGLISH 17

3 Undo the screws in the back of the shaver and
in the hair chamber.
4 Remove the front panel and the back panel.
5 Bend the 6 hooks aside and take out the
power unit.
Be careful, the hooks are sharp.
6 Remove the battery.
Be careful, the battery strips are sharp.
Do not connect the shaver to the mains again after
you have removed the rechargeable battery.
Guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone
number in the worldwide guarantee leaflet). If there
is no Consumer Care Centre in your country, go to
your local Philips dealer.
Guarantee restrictions
The shaving heads (cutters and guards) are not
covered by the terms of the international guarantee
because they are subject to wear.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the appliance. If
you are unable to solve the problem with the
information below, contact the Consumer Care
Centre in your country.
ENGLISH18

Problem Possible cause Solution
The shaver does
not shave as well
as it used to.
The shaving
heads are
damaged or
worn.
Replace the shaving heads (see
chapter ‘Replacement’).
Long hairs
obstruct the
shaving heads.
Clean the shaving heads one by
one (see section ‘Cleaning the
shaving unit with the cleaning
brush’ in chapter ‘Cleaning and
maintenance’).
You have not
inserted the
shaving heads
properly.
Make sure that the projections of
the shaving heads fit exactly into
the recesses (see section ‘Cleaning
the shaving unit with the cleaning
brush’).
The shaver does
not work when I
press the on/off
button.
The
rechargeable
battery is
empty.
Recharge the battery (see chapter
‘Charging’) or connect the
shaver to the mains.
The
temperature
of the shaver
is too high. In
this case, the
shaver does
not work.
As soon as the temperature of the
shaver has dropped sufficiently, you
can switch on the shaver again.
ENGLISH 19

20
简介
感谢您的惠顾，欢迎光临飞利浦！为了您能充
分享受飞利浦提供的支持，请在 www.philips.
com/welcome 上注册您的产品。
请阅读本用户手册，手册包含有关此剃须刀各
种功能的信息以及一些使用技巧，让您的剃须
体验更轻松更舒适。
一般说明 (图 1)
A 保护盖
B 剃毛刀头部件
C 剃须刀头部件释放按钮
D 剃须刀开/关按钮
E 充电指示灯
F 修发器（仅限于 PT880, PT860）
G 修发器释放滑块（仅限于 PT880, PT860）
H 清洁刷
I 适配器
注意： 您可以在剃须刀的背面找到型号。
注意事项
使用本产品之前，请仔细阅读本使用说明书，
并妥善保管以备日后参考。
危险
-保持适配器干燥。
-警告符号注释：禁止用在打开的水龙头下进
行清洗。
警告
-电源软线不能更换，如果软线损坏，此
-器具(电源适配器）应废弃。
-电源适配器内含有一个变压器。切勿自行更
换插头，否则将导致严重后果。
简体中文