Philips S7786 User manual

S7786

3
1
2
4
5
6
7
10
11 12 13
8 9

English 6
Français (Canada) 36

English
Contents
Introduction_______________________________________________________ 6
General description_______________________________________________ 6
Important safety information_____________________________________ 7
General____________________________________________________________ 12
What do the icons on my appliance handle mean?_____________ 12
What does the icon on my Quick Clean Pod mean?_____________ 14
How do I charge my appliance?__________________________________ 14
How do I use my appliance?_____________________________________ 16
How do I clean my appliance?___________________________________ 21
How do I use the Quick Clean Pod? (specific models only)_____ 24
How do I connect my shaver and smartphone?_________________ 27
How do I replace the shaving heads?____________________________ 29
Ordering accessories_____________________________________________ 31
Disposal___________________________________________________________ 32
Warranty and support____________________________________________ 34
Trademarks_______________________________________________________ 35
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome or via the app.
General description
1 Pop-up trimmer
2 Trimmer release slide
3 Shaving unit
4 Shaving unit release button
5 On/off button
6 Handle
7 Socket for small plug
8 Supply unit
9 Small plug
10 Pouch
6English

11 Quick Clean Pod Cartridge (specific models
only)
12 Quick Clean Pod (specific models only)
13 Cleaning brush
Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your appliance.
Important safety information
Read this important information carefully before
you use the appliance and its accessories and save
it for future reference. The accessories supplied
may vary for different products. The box shows
which accessories are supplied with your product
and whether your product is Bluetooth enabled.
Danger
- Keep the supply unit dry.
Warning
- To charge the battery, only use the detachable
supply unit (HQ8505) provided with the
appliance.
- The supply unit contains a transformer. Do not
cut off the supply unit to replace it with another
plug, as this causes a hazardous situation.
- Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
- Always unplug the appliance before you clean it
under the tap.
7
English

- Always check the appliance before you use it.
Do not use the appliance if it is damaged, as
this may cause injury. Always replace a
damaged part with one of the original type.
Philips Quick Clean Pod Cartridge fluid
- Do not swallow.
- Keep out of reach of children.
Caution
- Never use water hotter than 60°C to rinse the
shaver.
- Only use this appliance for its intended purpose
as shown in the user manual.
- For hygienic reasons, the appliance should only
be used by one person.
- Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the
appliance.
- If your shaver comes with a cleaning system,
always use the original Philips Quick Clean Pod
cartridge.
- Always place the cleaning system on a stable,
level and horizontal surface to prevent leakage.
- Always make sure the cartridge compartment is
closed before you use the cleaning system.
- When the cleaning system is ready for use, do
not move it to prevent leakage of cleaning fluid.
- Water may drip from the socket at the bottom
of the shaver when you rinse it. This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the
shaver.
- Do not use the supply unit in or near wall
sockets that contain an electric air freshener to
prevent irreparable damage to the supply unit.
8English

- Be careful when handling your smartphone
near water and in moist environments.
- The shortwave radio frequency signals of a
Bluetooth® appliance may impair the operation
of other electronic and medical devices.
- Switch off Bluetooth where it is prohibited.
- Do not use the appliance in medical facilities,
aircraft, refuelling points, close to automatic
doors, automatic fire alarms or other
automatically controlled devices.
- Keep this appliance at least 20 cm from
pacemakers and other medical devices. Radio
waves may impair the operation of pacemakers
and other medical devices.
Battery safety instructions
- Only use thisproduct for its intended purpose
and follow the general and battery safety
instructions as described in this user manual.
Any misuse can cause electric shock, burns, fire
and other hazards or injuries.
- To charge the battery, only use the detachable
supply unit (HQ8505) provided with the
product. Do not use an extension cord.
- Charge, use and store the product at a
temperature between 5°C and 35°C.
- Always unplug the product when it is fully
charged.
- Do not burn products and their batteries and
do not expose them to direct sunlight or to high
temperatures (e.g. in hot cars or near hot
stoves). Batteries may explode if overheated.
- If the product becomes abnormally hot, gives
off an abnormal smell, changes color or if
charging takes much longer than usual, stop
using and charging the product and contact
your local Philips dealer.
9
English

- Do not place products and their batteries in
microwave ovens or on induction cookers.
- This product contains a rechargeable battery
that is non-replaceable. Do not open the
product to replace the rechargeable battery.
- When you handle batteries, make sure that your
hands, the product and the batteries are dry.
- To prevent batteries from heating up or
releasing toxic or hazardous substances, do not
modify, pierce or damage products and
batteries and do not disassemble, short-circuit,
overcharge or reverse charge batteries.
- To avoid accidental short-circuiting of batteries
after removal, do not let battery terminals come
into contact with metal objects (e.g. coins,
hairpins, rings). Do not wrap batteries in
aluminum foil. Tape battery terminals or put
batteries in a plastic bag before you discard
them.
- If batteries are damaged or leaking, avoid
contact with the skin or eye. If this occurs,
immediately rinse well with water and seek
medical care.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Radio Equipment Directive
- S7000 series appliances are equipped with
Bluetooth class 2.
- The frequency band in which the Bluetooth on
S7000 series appliances operates is 2.4GHz.
- The maximum radio frequency power radiated
in the frequency band in which the S7000
series appliances operate is less than 20 dBm.
10 English

- This equipment has been so constructed that
the product complies with the requirement of
Article 10(2) as it can be operated in at least one
EU Member State as examined and the product
is compliant with Article 10(10) as it has no
restrictions on putting into service in all EU
member states.
- Hereby Philips declares that S7000 series
appliances are in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU. The declaration of
conformity may be consulted at
www.philips.com/support.
General
- This shaver is waterproof. It is suitable for use in
the bath or shower and for cleaning under the
tap. For safety reasons, the shaver can
therefore only be used without cord.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
- The Bluetooth® wordmark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Koninklijke
Philips N.V. is under license.
- Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
- This device complies with ISED license-exempt
RSS(s). Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
11
English

- This device complies with the ISED RF exposure
limits and has been evaluated in compliance
with portable exposure condition.
- There is no limitation as to which distance can
be used from the human body.
- This Class B digital apparatus complies with
Canadian ICES-003.
General
- This shaver is waterproof. It is suitable for use in
the bath or shower and for cleaning under the
tap. For safety reasons, the shaver can
therefore only be used without cord.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
- The Bluetooth® wordmark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Koninklijke
Philips N.V. is under license.
What do the icons on my appliance handle
mean?
Icon Behavior Meaning
Pulsing The cleaning program is in progress.
Flashing slowly
when you
remove the
shaver from the
Quick Clean Pod
during the
cleaning program
The cleaning program was interrupted. If
you put the shaver back into the Quick
Clean Pod within four seconds, the
cleaning program resumes automatically.
12 English

Icon Behavior Meaning
Flashing when
you switch off
the appliance
Clean the shaver in the Quick Clean Pod.
Clean the attachments under the tap.
Lights up
continuously The cleaning program is in progress.
Flashing quickly
when you
remove the
shaver from the
Quick Clean Pod
or press the
on/off button
during the
cleaning program
The cleaning program was stopped. If you
wish to continue, you need to restart the
cleaning cycle by putting the shaver into
the Quick Clean Pod and pressing the
on/off button.
Lights up The SkinIQ is actively detecting your
shaving behavior.
Lights up green The correct shaving motion (circular
movements) was used.
Lights up orange Your shaving motion can be improved.
See the app for details and advice.
Lights up Open the app. Either there is a notification
waiting for you or you need to sync your
shaves to prevent data loss (see 'How do I
connect my shaver and smartphone?').
Flashing slowly No connection is established between
your shaver and smartphone (see 'How do
I connect my shaver and smartphone?').
Flashing quickly An error has occurred (e.g. the motor is
blocked). Check the app for details.
Flashing The appliance must be disconnected from
the wall socket before you can switch it
on (see 'How do I charge my appliance?').
13
English

Icon Behavior Meaning
Flashing when
you press the
on/off button
The travel lock is activated (see 'Storage
and travel').
Lights up when
you pick up the
appliance
The number of bars lit up show the
remaining battery charge.
Bottom light
flashing orange The battery is almost empty (see 'How do I charge my appliance?').
Lights flashing in
sequence The appliance is charging.
Lights up
continuously The appliance is fully charged.
What does the icon on my Quick Clean Pod
mean?
Icon Behavior Meaning
Becomes visible on the
Quick Clean Pod The Quick Clean Pod Cartridge needs to be replaced.
How do I charge my appliance?
Charge the appliance before you use it for the first
time and when the bottom light of the battery
status indicator flashes orange, indicating that the
battery is almost empty.
Charging takes approx. 1 hour.
Quick Charge: After approx. 5 minutes of charging,
the battery contains enough energy for one shave.
When the appliance is fully charged it has a
cordless operating time of up to 60 minutes.
14 English

Note: You cannot use the appliance while it is
charging.
Charging with the supply unit
1Make sure that the appliance is switched off.
2Insert the small plug into the appliance and put
the supply unit in the wall socket.
-While the appliance is in quick charge mode,
the lights of the battery status indicator light
up one after the other. After approximately 5
minutes, the bottom light of the battery
status indicator flashes. The battery now
contains enough energy for one shave.
-While the appliance charges, first the bottom
light of the battery status indicator flashes
and then lights up continuously. Next the
second light flashes and then lights up
continuously, and so on until the appliance
is fully charged.
-When the appliance is fully charged, all three
battery indicator lights light up continuously.
After approx. 30 minutes, the light goes out
automatically.
3After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
Charging in the charging stand (specific models only)
1Make sure the appliance is switched off.
2Put the small plug in the charging stand and put
the supply unit in the wall socket.
3Place the appliance in the charging stand.
Specific models only: The light ring on the
bottom of the charging stand lights up and
rotates quickly.
15
English

-After approximately 5 minutes, the light ring
rotates slower. The battery now contains
enough energy for one shave.
-As the appliance continues to charge, the
light ring becomes brighter and rotates
slower.
-When the appliance is fully charged, the light
ring lights up fully and stops rotating.
4After charging, remove the supply unit from the
wall socket and pull the small plug out of the
charging stand.
'Unplug for use' symbol
The 'unplug for use' symbol flashes to remind you
to disconnect the appliance from the wall socket
and remove the small plug from the appliance
before you switch it on.
How do I use my appliance?
Warning: Always check the appliance and
all accessories before use. Do not use the
appliance or any accessory if it is damaged,
as this may cause injury. Always replace a
damaged part with one of the original type.
Note: This appliance is waterproof. It is suitable for
use in the bath or shower and for cleaning under
the tap. For safety reasons, the appliance can
therefore only be used without cord.
16 English

SkinIQ
This appliance is equipped with SkinIQ technology
which intelligently detects your hair density and
shaving technique. For a better technique, you can
get personalized shaving advice in the app.
You get advice in 2 ways: guided shaves in real
time and synchronized shaves. We advise you to
start with the guided shave to enhance your
shaving experience.
- Correct handling of your appliance will
contribute to the best shaving result.
- Follow the advice obtained from the
synchronized shaves and the personalized
programs.
Shaving
You can use this appliance either wet or dry, or
even under the shower. For a wet shave, apply
some water and shaving foam or gel to your skin
and rinse the shaving heads under the tap with
warm water before following the steps below.
1Switch on the appliance.
2Move the shaving heads over your skin in
circular movements to catch all hairs growing in
different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
Note: Do not press too hard, as this can cause
skin irritation.
Note: If you are shaving with gel or foam, rinse
the shaving unit regularly during your shave to
ensure that it continues to glide smoothly over
your skin.
17
English

3Use the narrow sides of the shaving unit to
shave in hard-to-reach areas such as along
your jawline and under your nose.
4Switch off and clean the appliance after each
use.
Note: Make sure you rinse all foam or shaving
gel off the appliance.
SkinIQ motion guidance: When you have
finished shaving you receive feedback on the
handle. The motion feedback icon lights up in
various colors, giving you feedback on your
overall shave.
-When you shave in the correct motion
(circular movements), the motion feedback
icon lights up green.
-When your shaving motion can be improved,
the motion feedback icon lights up orange.
See the app for details and advice.
Skin adaptation period
Your first shaves may not bring you the result you
expect and your skin may even become slightly
irritated. This is normal. Your skin needs time to
adapt to any new shaving system.
Follow the advice provided by the app and shave
regularly (at least 3 times a week) with this shaver
for a period of 3-4 weeks to allow your skin to
adapt to the new shaver.
18 English

Cleaning reminder
When you switch off the appliance, the cleaning
reminder flashes to remind you to clean the
appliance.
- Clean the appliance and attachments after
each use to prevent clogging and damage.
- Clean the shaving heads thoroughly once a
month or when the appliance does not shave
as well as it used to (see 'Thorough cleaning').
Synchronize your shaves
This shaver stores your shave data so you don't
need to take your smartphone with you when you
shave.
When the data storage is almost full, the
notification symbol flashes. To prevent data loss,
synchronize the shaver with the app (see 'How do I
connect my shaver and smartphone?').
1Make sure you are close to the shaver and open
the app.
2The app connects automatically and
synchronizes your last shaves.
Trimming
You can use the trimmer to groom your sideburns
and moustache.
1Push the trimmer release slide downwards to
open the trimmer.
2Switch on the appliance.
19
English

3Hold the trimmer perpendicular to the skin and
move the appliance downwards while you exert
gentle pressure.
4You can also use the trimmer under your nose.
5Switch off the appliance and clean the trimmer
after each use to prevent clogging and damage.
6Close the trimmer.
Storage and travel
Note: We advise you to let the appliance and its
attachments dry before you store them for the
next use.
- Store the appliance in the pouch (if supplied).
Travel lock
You can lock the shaver when you are going to
travel to prevent it from switching on accidentally.
Activating the travel lock
3 sec.
Press the on/off button for 3 seconds to use the
travel lock mode.
When the travel lock is activated, the travel lock
symbol flashes.
Note: Bluetooth is switched off when the travel
lock is activated.
Deactivating the travel lock
Press the on/off button for 3 seconds.
20 English

Once the travel lock is deactivated, the appliance
switches on automatically.
Note: The shaver unlocks automatically when it is
connected to a wall socket.
How do I clean my appliance?
Clean the appliance and the attachments after
each use for optimal performance.
Cleaning the shaver under the tap
Clean the shaver after each use to prevent
clogging and damage.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
While rinsing the shaving unit, water may drip out
of the base of the shaver. This is a normal
occurrence.
1Switch on the shaver.
2Rinse the shaving unit under a warm tap.
3Switch off the shaver. Press the release button
to open the shaving unit.
21
English

4Rinse the hair chamber under a warm tap.
5Rinse the shaving head holder under a warm
tap.
6Carefully shake off excess water and let the
shaving head holder air-dry completely.
7Close the shaving unit.
Thorough cleaning
We advise you to clean the shaving heads
thoroughly once a month or when the shaver does
not shave as well as it used to.
1Make sure that the appliance is switched off
and disconnected from the wall socket.
2Press the release buttons on the shaving unit
and pull the shaving head holder off the
shaving unit.
22 English