Philips 3000 series User manual

3000
TAT3225

MICRO-USB
TAT3225
TAT3225
3000
クイックスタートガイド

5
Multi-function buttons
Micro USB charging slot
1
3
2
4
5

first
• Charging process is verified by
the LED light. The white light flashes
on the front panel,
• When the charging case is fully
charged,the white light stops flashing.
While charging earpieces, White LED will flash.
White LED stops flashing and keeps lighting
on, means fully charged.
White

TAT3225
TAT3225
Auto power on: take the earpieces
from charging case, the earpieces
power on automatically and start
for pairing. Both left and right LED
of earpieces flash.
You will hear " power on" reminder
voice.
first

TAT3225
TAT3225
If you met L/R earbud disconnected
problem, please try below 2 methods
to reconnect.
4.1 Put both Left and Right earbuds in to
charging case，close the charging cover 10
seconds and pick up for Blue Tooth
reconnection.
4.2 If still not works, try below.
Step1: Hold & Press 5 seconds to manual
power off both earbuds.
Step2: Hold & Press both Left and Right
earbuds 10 seconds.
Step3: White LED flashes 3 times.
Step4: Reset done, headset in new pairing.
Take the L / R earpieces from the
charging case, the earpiece will
power on automatically. There will
be a voice " Power on" from L / R
earpiece.
4

Take both
earpieces out
from the
charging case
or Hold & Press
5 seconds.
Earpieces
press once
press once
press and hold
2 seconds
press 3 timesRight/Left
earpieces
The LED flashes
once
The LED flashes
quickly
The LED flashes
quickly. If no
connection can be
made, the ear pieces
will turn itself off in 5
minutes.
You will hear low
battery voice pop
press and hold
for 2 seconds
press and hold
2 seconds
Earpieces
Place both earpieces in
charging case and close
the charging cover..
Backward
Forward Only the white
LED flashes.
The white LED is
on
press and hold
the key for 5s

TAT3225
TAT3225