Philips SHC8680/61 User manual

SHC 8680
Instructions for use
English 6
Mode d'emploi
Français 14
Instrucciones de manejo
Español 22
Bedienungsanleitung
Deutsch 30
Gebruiksaanwijzing
Nederlands 38
Instruzioni per l'uso
Italiano 46
Manual de utilização
Português 54
Bruksanvisning
Svenska 62
Käyttöohje
Suomi 70
 
 78
Kullanım talimatları
Turkçe 86
Instrukcja obsługi
Polski 94
Návod k použití
Česky 102
Használati utasítás
Magyar 110
Инструкции по использованию
Русскйи 118
Kasutusjuhend
Eesti keel 126
Lietošanas pamācība
Latviešu valoda 134
Naudojimo instrukcija
Lietuviškai 142
SHC8680new.qxd 04-05-2005 10:23 Pagina 1

A)
SHC8680new.qxd 04-05-2005 10:23 Pagina 2

☎Helpline (www.p4c.philips.com)
België/Belgien/Belgique
070 222 303
China
86-800 820 5128
Deutschland
0180 535 6767
España
902 113 384
France
0825 889789

0 0800 3122 1280
Hong Kong
868-2619 9663
Ireland
01 764 0292
Italia
199 11 88 99
Nederland
0900 8406
Österreich
0810 001 203
Polski
22 571 0 571
Portugal
2 1416 3033
Schweiz/ Suisse/ Svizzera
0844 800 544
Suomi
09 6158 0250
Sverige
08 5985 2250
Turkiye
0800 261 3302
UK (United Kingdom)
0870 900 9070
SHC8680new.qxd 04-05-2005 10:23 Pagina 3

4
B)
SHC8680new.qxd 04-05-2005 10:23 Pagina 4

5
SHC8680new.qxd 04-05-2005 10:23 Pagina 5

6ENGLISH
Introduction
SHC8680
One of the most sophisticated designs of FM wireless headphone system.
This lightweight system implements the most advanced analog FM wireless
technology, which offers you complete freedom of movement while
enjoying your favourite movie or music.The energizing docking station
recharges your receiver unit while it is not in use.Your headphone will
always be ready to use when you need to enjoy a movie.This innovative
design of docking station also allows neat storage of earphone cables,
neckstrap and accessories.You are now free from the hassles of tangled
cables!
To ensure you achieve the best performance from your FM wireless
headphone system, please read this manual carefully and keep it for future
reference.
Functional overview -
Product illustrations on inside flap
A) Transmitter station
1Power indication
2Charging indication
3Line in
4DC power input
5 Channel switch
B) Receiver Unit
6Power
7Auto tuning button
8Volume control
9L/ R channel balance
10 Bass / Off / Treble
11 L / STEREO / R
12 Power status
13 Headphone output
14 Battery compartment door
15 In ear headphone (SHE775WN/00)
16 Neckstrap
17 Belt clip
SHC8680new.qxd 04-05-2005 10:23 Pagina 6

ENGLISH 7
Important information
Please read the following instructions carefully, and retain this booklet for
future reference.All safety and operating instructions should be read
before using the FM wireless headphone system.
Safety precautions
•Prevent fire or shock hazard: do not expose this equipment to humidity,
rain, sand or excessive heat caused by heating equipment or direct
sunlight.
•Radio equipment for wireless audio applications is not protected against
disturbance from other radio services.
•Do not use cleansing agents containing alcohol, spirits, ammonia or
abrasives as they may harm the housing. Use a slightly dampened chamois
cloth to clean the housing.
•If fluid spills into the headphone system, remove the batteries
immediately and consult an authorized dealer.
•Do not use this product in damp places or close to water.
•Do not expose this product to extreme heat or direct sunlight.
•Do not disassemble the product. In the event of technical difficulties, take
it to your Philips retailer.
•Do not cover this product
•Inadequately protected or sensitive electronic equipment may be affected
by the use of this product.This interference may lead to damage to either
equipment. Please check whether or not surrounding equipment may be
affected by this product before you start using it.
•Hearing Safety! Continuous use at high volume may permanently
damage your hearing.
Getting your FM wireless headphone system ready
IMPORTANT!
• Use only Philips SBC CS030/00 (/05 for UK, Ireland)
12V/200mA AC/DC adapter.
• Use only Philips’ shortened sleeve rechargeable battery NiMH
(AA, type number:AY3362, partnumber 310330884711).
• Do not use NiCd batteries or alkaline batteries as they may
damage your FM wireless headphone system.
SHC8680new.qxd 04-05-2005 10:23 Pagina 7

8ENGLISH
Installing/replacing batteries
1Open the battery compartment door located at the bottom of the
receiver unit.
2Insert a rechargeable battery.
3Make sure the battery is correctly inserted as indicated by the engraved
polarity symbol in the battery compartment.
4Close the battery compartment door.
Power up the transmitter station
5Make sure the adapter’s rated voltage indicated on the type plate
corresponds to the mains voltage supply.
6Connect the DC power output connector of the 12 Volt/ 200mA AC/DC
adapter to the DC POWER INPUT jack at the back of the transmitter.
7Connect the 12 Volt/200mA AC/DC adapter to the mains socket.
Always remove the adapter from the mains socket if the transmitter will not
be used for a period of time.
Charging the receiver unit
8Open the lid of the transmitter station.
9Place the receiver unit into the transmitter station (will also be referred
to as the ‘energizing docking station’ in the following texts).
10 Make sure the charging contacts at the bottom of the receiver unit are
well aligned with the charging pins of the docking station.
11 Close the lid of the docking station.
12 The CHARGING INDICATION on front of the docking station will be
illuminated in green, and will be turned off automatically at the end of the
charging cycle.
Ni-MH
Type: . . . .
Input: . . . .
Output: . . . .
TRANSMIT CHARGING
CHARGINGTRANSMIT
SHC8680new.qxd 04-05-2005 10:23 Pagina 8

IMPORTANT!
• Make sure you switch off the receiver unit before charging.
WARNING!
• Before using the FM headphone for the first time, please ensure
that the battery is fully charged for at least 16 hours.
This will guarantee a longer operating lifetime of battery.
• This product complies with the latest safety regulations.
Please only charge the battery with the docking station provided
(SHC8680) or with fully compatible charger.
Audio connection (Transmitter station)
13 Connect one end of the audio cable (3.5 mm stereo plug) to the
transmitter’s 3.5 mm stereo LINE IN jack.
14 Connect the other end of the 3.5 mm stereo cable to either:
a) The headphone output of an audio source, such as TV, HiFi or PC.
Adjust the volume level of the audio source to a fixed reasonably high level;
for example 25% of the maximum level.
• In case your audio source has a 6.3mm headphone output, use the
supplied 3.5mm to 6.3mm stereo adapter plug.
IMPORTANT!
• In case of certain TVs, the headphone jack output level can only
be adjusted after accessing the TV on-screen menu.
b) The line output of an audio source, such as REC OUT or LINE OUT
(with the Y-cable supplied).
•Check if the red RCA plug (right channel) is connected to the right
channel (red) of the audio source.
•Check if the white RCA plug (left channel) is connected to the left
channel (white) of the audio source.
• In case the audio source has an adjustable RCA output level,
adjust the output level to the highest acceptable undistorted level.
ENGLISH 9
L
w
het
i
R
r
ed
HiFi PC
Computer
CD
SHC8680new.qxd 04-05-2005 10:23 Pagina 9

10 ENGLISH
Audio connection (Receiver unit)
15 Plug the bypacked in ear headphone (SHE775WN/00) into the
HEADPHONE OUTPUT jack ( ) of the receiver unit.
16 Depending on your preferred wearing style, you may carry the receiver
unit with the provided neckstrap or belt clip.
For details in wearing styles, please refer to the separate Quick Reference
Guide.
Using your FM Wireless Headphone System
17 Select one of the three transmission channels provided at the back of the
transmitter station.
We recommend you to select channel one as your first option.
18 Switch on your audio source and carefully increase the volume of the
audio source.
The POWER INDICATION on front of the transmitter station will be
illuminated in red when signals are received.
19 Switch on the POWER of the receiver unit.
The POWER STATUS light on the receiver unit will be illuminated in red
automatically.
20 Press and hold the AUTO TUNING button on the receiver unit for about
1 second to tune to the correct transmission channel.
The receiver unit will automatically be tuned to the transmitter.
21 In case interference from neighbouring transmitters has occurred, adjust
the transmission channel of the transmitter station, then repeat step 20
to tune the receiver unit.
22 Adjust the volume to your desired listening level.
IMPORTANT!
• Avoid adjusting the listening volume level at the audio source as
this may compromise the audio quality on too low input levels.
23 To enjoy sound enhancement features, you may choose between the
following 2 options:
– Bass boost
– Treble boost
ON
TRANSMIT CHARGIN
G
AUTO
TUNING
ON
l
OFF
AUTO VOL
ON
l
OFF
AUTO
TUNING
ON
l
OFF
AUTO
TUNING
VOL
ON
l
OFF
AUTO
TUNING
ON
l
OFF
AUTO
TUNING
VOL
ON
l
OFF
ONO
I
F
FAUTOT
UNN
IGVOL.
SHC8680new.qxd 04-05-2005 10:24 Pagina 10