Philips SHN2600/28 User manual

Register your product and get support at
www.philips.com/welcome
EN Quick Start Guide
ES Guía de configuración rápida
FR-CA Guide de démarrage rapide
SHN2600
Noise Canceling Headphone

A
B
CD
1
34
23
45
12

English
Important
No naked flame sources, such as lighted candles, should be placed on the
apparatus.
The equipment will be used in moderate climate only.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Disposal of batteries
Your product and/or accessories operate on batteries covered by
the European Directive 2006/66/EC, which cannot be disposed with
normal household waste. Please inform yourself about the local rules
on separate collection of batteries because the correct disposal will help
prevent negative consequences for the environmental and human health.
Use the headphones
To save battery power, adjust the switch to OFF after use.
1Install the battery (Fig. A).
2Try on each pair of caps (3 pairs supplied) for the most suitable one (Fig. B_1).
3Adjust the slider position (Fig. B_2).
4Put on the headphones in neck-strap style, with the slider behind your neck
(Fig. B_3).
5Twist ear buds gently to get the best fit (Fig. B_4).
6Connect the audio plug to your music player (Fig. C).
7Adjust the switch to ON to enable noise canceling function (Fig. D).
LED light turns orange.»
8To continue playing music when the battery is exhausted or removed, adjust
the switch to OFF (Fig. D).
LED light turns off.»
9Replace the battery when LED light blinks in orange continuously.

© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Specifications are subject to change
without notice.
Trademarks are the property of
Koninklijke Philips Electronics N.V. or
their respective owners.
V1.1 Printed in China W