Philips MCD802/98 User manual

Quick start guide
MCD802/98
Connect
Setup
Enjoy
EN
1
2
3
Micro DVD Theater

What’s in the box
FM wire antenna
Control cableRemote Control
Quick Start Guide User manual
FM T-Type antenna
Connect
1
Install remote control batteries
1Open the battery compartment.
2Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3Close the battery compartment.
A
Composite video
cable (yellow)
Power cord
Connect control cable
B
1Connect the supplied control cable to the
CONTROL CABLE jacks on the main unit.
1
2
Quick start guide
XXXXXX
Connect
Setup
2Enjoy
Eng
XXXXXXX
XXXXXX

Connect
1
Connect FM antenna
D
Connect speakers
CDNote
•Ensure that the colors of the speaker
wires and terminals are matched.
1Hold down the socket flap.
2Insert the stripped part of the wire com-
pletely.
Insert the right speaker wires to•
“SPEAKER RIGHT”, left speaker wires
to “SPEAKER LEFT”.
3Release the socket flap.
1Connect the supplied FM wire antenna to
the FM ANTENNA socket on the unit.
For better reception, connect the FM
T-Type antenna:
1Connect the supplied FM T-Type antenna to
the FM ANTENNA socket on the unit.
2Stretch the antenna out to its full length,
and affix it to the wall.
Left speakerRight speaker

Connect
1
Connect power
F
Connect TV
E
TV
ETip
•See the User Manual for how to connect
other devices to this system.
1Connect the supplied composite video
cable to:
• the VIDEO socket on this unit.
• the video input socket on the TV.
CCaution
•Risk of product damage! Ensure that the
power supply voltage corresponds to
the voltage printed on the back or the
underside of the unit.
•Risk of electric shock! When you unplug
the AC power cord, always pull the plug
from the socket. Never pull the cord.
• Before connecting the AC power cord, ensure
you have completed all other connections.
1Switch the voltage selector at the bottom
of the unit to the local power line voltage.
2Connect the power cord to the AC
MAINS~ jack on the main unit.
3Connect the power plug to the wall outlet.

Play disc
A
1Press DISC to select the disc source.
2Press to open the disc compartment.
3Insert a disc with the printed side facing
up, then close the disc compartment.
Play starts automatically.
»
To pause/resume play, press•.
To stop play, press•9.
Enjoy
3
Setup
2
Set the clock
A
1In standby mode, press CLOCK to activate
the clock setting mode.
The time digits are displayed and begin to blink.
»
If the time digits are not displayed, press
»
and hold for more than 2 seconds to
switch to standby mode, then repeat step 1.
2Press / to set the hour.
3Press / to set the minute.
4Press and hold CLOCK to select 12-hour
or 24-hour format.
5Press CLOCK to confirm.
Play from USB
B
1Flip open the USB socket cover on the
front panel.
2Insert the USB plug of a USB device into
the USB socket.
3Press USB to select the USB source.
Play starts automatically.
»
To pause/resume play, press•.
To stop play, press•9.
L
a
b
e
l
s
i
d
e

Enjoy
3
Program and tune to radio
stations
C
First time tuning
When you access to radio mode for the first
time, follow the instructions to install the radio
stations.
1Press TUNER.
‘AUTO INSTALL ... PRESS PLAY’ is displayed.
»
2Press .
All detected radio stations are stored.
»
Once complete, it tunes to the first preset
»
radio station.
ETip
• Detailed features and additional functions are
described in the user manual.
© Royal Philips Electronics N.V. 2009
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China PDCC-2009
• To stop auto tuning, press .
Reinstall and listen to radio stations
1Press TUNER to select the tuner source.
2Press and hold PROG for more than 2 sec-
onds to activate automatic program mode.
All available stations are programmed in the
»
order of waveband reception strength.
3Press
J/Kto select a preset number.
ETip
• For better FM stereo reception, connect the
supplied T-Type antenna.
• For optimal reception, fully extend and adjust
the position of the FM antenna.