Philips SCF281 User manual

SCF283, SCF282, SCF281
Register your product and get support at
www.philips.com/welcome

1

SCF283, SCF282, SCF281
ENGLISH 6
 10
 15
 19
 23
 27
 31
 36
 40
 44
 49
 53
 58
 62
 66
 70

6
Introduction
Congratulations on your purchase and welcome to Philips!To fully benefit from the support that
Philips offers, register your product at www.philips.com/welcome.
General description (Fig. 1)
1Lid
2Clips
3Basket
4Base
5Bottle cavities
6Teat cavities
7Dome cap holders
8Slots for large bottles
9Slots for breast pumps
Important
Read this user manual carefully before you use the microwave steriliser and save it for future
reference.
Warning
- Let the steriliser cool down before you remove it from the microwave. Be careful when you
move or open the steriliser, because the water in it can still be hot.
- Do not remove the lid from the steriliser immediately after sterilising, as the steam that comes
out is very hot. Let the steriliser cool down, as steam can cause burns.
- Only use water without any additives.
- Always make sure that the base is filled with water when you use the steriliser in the microwave.
- Do not put bleach or other chemicals in the steriliser.
- Do not place metal items in the steriliser, as this may cause damage to the microwave.
- Do not overload the steriliser, otherwise the items are not sterilised properly.
- Only sterilise baby bottles and other items that are suitable for sterilisers. Check the user
manual of the items you want to sterilise, to make sure they are suitable for sterilisers.
- This steriliser is intended for household use only.
Caution
- Children should be supervised to ensure that they do not play with the steriliser.
- Always make sure the base is filled with 200ml water before you start sterilising.
- After each use, pour any remaining water out of the steriliser after the water has cooled down.
- Always let the steriliser cool down before you store it.
- Always wash your hands before you touch the sterilised items.
- Do not expose the steriliser to extreme heat or direct sunlight.
- Do not place the steriliser on a hot surface.
- If you use a combination oven (with grill function), make sure that the oven or grill is switched
off and has cooled down before you put the steriliser in it.
Before first use
Before you use the steriliser for the first time, clean it thoroughly as described below.
1 Remove the basket from the base.
2 Fill a baby bottle or a measuring cup with exactly 200ml tap water and pour this into the
base (Fig. 2).
ENGLISH

The amount of water needs to be exactly 200ml.When the base contains too much water, the
items will not be sterilised properly.When the base does not contain enough water, this can
cause damage to the steriliser or microwave.
3 Place the basket in the base (Fig. 3).
4 Put the lid on the steriliser (1) and push down the clips to lock the lid into place (2). (Fig. 4)
5 Place the steriliser in the microwave. (Fig. 5)
Note: Make sure that the microwave is clean and dry before you start sterilising.
Note: If you have a combination oven, make sure that the oven or grill is switched off and has cooled
down before you put the steriliser in it.
6 Select the appropriate microwave wattage and time (see the table in chapter ‘Using the
microwave steriliser’) and let the microwave operate.
7 After the microwave has finished, open it and let the steriliser cool down before you remove
it from the microwave.
8 Pull open the clips (1) and remove the lid (2) (Fig. 6).
9 Pour out the remaining water and rinse the base and basket thoroughly.
Preparing for use
Filling the basket
Before you put the items to be sterilised in the basket, clean them thoroughly in the dishwasher or
clean them by hand with hot water and some washing-up liquid. Make sure you remove all milk residues.
Note: Make sure all items to be sterilised are completely disassembled and place them in the basket with
their openings pointing downwards, to prevent them from filling with water.
Note: Do not stack the items too closely together.The steam has to be able to circulate around the items
to ensure effective sterilisation.
There are several ways to fill the basket:

1 Place the bottles upside down in the bottle cavities. (Fig. 7)
2 Place the teats in the teat cavities (Fig. 8).
3 Place the screw rings loosely on top of the teats (Fig. 9).
Note: Larger screw rings only fit if placed in slanted position over the teats.
4 Place the dome caps in the dome cap holders (Fig. 10).

1 Insert the rim of the bottles into the slots for large bottles (Fig. 11).
2 Place the teats in the teat cavities (Fig. 12).
3 Place the screw rings loosely on top of the teats (Fig. 13).
Note: Larger screw rings only fit if placed in slanted position over the teats.
4 Place the dome caps in the dome cap holders (Fig. 14).
ENGLISH 7


1 Place the storage cups upside down in the basket (Fig. 15).
2 Place the lids vertically around the bottles. (Fig. 16)

Do not place the electrical parts in the steriliser.
1 Fully disassemble the breast pump.
2 Insert the rim of the pump body in the breast pump slots in the bottom of the
basket (Fig. 17).
3 Place the bottles upside down in the bottle cavities (Fig. 18).
4 Place the remaining non-electrical parts of the breast pump in any unobstructed space in the
basket (Fig. 19).
Note: Make sure steam can circulate around these parts.

Only place items in the steriliser that are suitable for sterilising. Do not sterilise your bottle
brush or items that are filled with liquid, e.g. teethers filled with cooling fluid.
Note: Before you sterilise bottles and other items, clean them first.
1 Remove the basket from the base.
2 Fill a baby bottle or measuring cup with exactly 200ml tap water and pour this into the
base (Fig. 2).
The amount of water needs to be exactly 200ml.When the base contains too much water, the
items will not be sterilised properly.When the base does not contain enough water, this can
cause damage to the steriliser or microwave.
3 Place the basket in the base (Fig. 3).
4 Place the items to be sterilised in the basket (see chapter ‘Preparing for use’).
5 Put the lid on the steriliser (1) and push down the clips to lock the lid into place (2) (Fig. 4).
6 Place the steriliser in the microwave. (Fig. 5)
Note: Make sure that the microwave is clean and dry before you start sterilising.
7 Select the appropriate microwave wattage and time (see table below) and let the microwave
operate.
Note: If you have a combination oven, make sure that the oven or grill is switched off and has cooled
down before you put the steriliser in it.
Note: Do not exceed the sterilising time indicated in the table.
ENGLISH8


Wattage Sterilising time Cool-down time
1200W-1850W 2min. 2min.
850W-1100W 4min. 2min.
500W-800W 6min. 2min.
8 After the microwave has finished, open it and let the steriliser cool down before you remove
it from the microwave.
Be careful, hot steam may come out of the microwave.
9 Remove the steriliser from the microwave.
Note: Make sure you keep the steriliser level to avoid leaking or spilling hot water.
Note:The sterilised items remain sterile for up to 24 hours in the microwave steriliser if you do not
remove the lid.
10 Pull open the clips (1) and remove the lid (2) (Fig. 6).
11 Remove the bottles and other items from the basket. Use the tongs to remove the smaller
items.
Be careful, hot steam may come out of the steriliser and the sterilised items may still be hot.
12 When you have removed the sterilised items, pour out the remaining water, rinse the base
and basket thoroughly and wipe all parts dry.
Cleaning
Clean the lid, the basket and the base after every use, to prevent scale from building up.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as bleach, petrol or
acetone to clean the steriliser.
Note: Let the steriliser cool down before you clean it.
1 Clean the steriliser parts in hot water with some washing-up liquid.
Note:You can also clean the steriliser parts in the dishwasher.
2 After cleaning, dry all parts properly.
Note:After cleaning, store the steriliser in a clean, dry place.

If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you find its
phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
ENGLISH 9

10

Поздравления за вашата покупка и добре дошли във Philips! За да се възползвате
изцяло от предлаганата от Philips поддръжка, регистрирайте продукта си на адрес
www.philips.com/welcome.

1 Капак
2 Щипки
3 Кошница
4 Основа
5 Кухини за бутилки
6 Кухини за биберони
7 Държачи за капачки
8 Отвори за големи бутилки
9 Отвори за гръдни помпи

Преди да използвате микровълновия стерилизатор, прочетете внимателно това ръководство
за потребителя и го запазете за справка в бъдеще.

- Оставете стерилизатора да изстине, преди да го извадите от микровълновата фурна.
Внимавайте, когато премествате или отваряте стерилизатора, тъй като водата в него все
още може да е гореща.
- Не отваряйте капака непосредствено след стерилизиране, тъй като излизащата пара е
много гореща. Оставете стерилизатора да изстине, тъй като парата може да причини
изгаряния.
- Използвайте само вода без примеси.
- Основата винаги трябва да е пълна с вода, когато използвате стерилизатора в
микровълновата фурна.
- Не слагайте в стерилизатора белина или други химикали.
- Не поставяйте в стерилизатора метални предмети, тъй като това може да повреди
микровълновата фурна.
- Не претоварвайте стерилизатора, тъй като тогава нещата не се стерилизират, както
трябва.
- Стерилизирайте само бебешки бутилки и предмети, подходящи за стерилизиране.
Проверете в ръководството за потребителя за предметите, които искате да
стерилизирате, дали са подходящи за стерилизиране.
- Този стерилизатор е предназначен само за битови цели.

- Наглеждайте децата, за да не си играят със стерилизатора.
- Преди да започнете да стерилизирате, се уверете, че основата е пълна с 200 мл вода.
- След всяка употреба изливайте останалата вода от стерилизатора, след като тя изстине.
- Винаги оставяйте стерилизатора да изстине, преди да го приберете.
- Винаги измивайте ръцете си, преди да докосвате стерилизираните предмети.
- Не излагайте стерилизатора на високи температури или пряка слънчева светлина.
- Не поставяйте стерилизатора върху гореща повърхност.
- Ако използвате комбинирана фурна (с грил), се уверете, че фурната (или грилът) е
изключена и е изстинала, преди да поставите стерилизатора в нея.
