Philips 1001FDM User manual

Performance Recessed CFL Downlighting 1001FDM
Page 1 of 1 5" Aperture, 1 Light, Compact Fluorescent, Non-IC, Dimming, Frame-In Kit
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • G0808
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier is a Philips group brand
FOR O.A. HEIGHT
SEE TRIM
SPECIFICATION
5" FRAME APERTURE
5 1/4" CEILING CUTOUT
1
2
6
4
5
7
8
3
8 7/8"
7 3/4"
9"
12 15/16" MIN
24 1/8" MAX
Complete Fixture consists of Frame-In Kit and Reflector Trim. Select each separately.
Uniframe™
Frame-In Kit
Uniframe™Compact Fluorescent Performance Series Reflector Trims
Vertical
Open
Vertical Wall
Wash - Single
Vertical Wall
Wash - Double
Horizontal
Open
Horizontal Wall
Wash - Single
Horizontal Wet Location
Lensed / Diffused
Horizontal
Cross Blade
1001FD26MX1
(Advance Mark10 – 120v)
26w Triple, GX24q-3 Base
120v – 0.26amp max
1001FD26MX2
(Advance Mark10 – 277v)
26w Triple, GX24q-3 Base
277v – 0.11amp max
1001FD13M7U
(Advance Mark7 – 120/277v)
13w Triple, GX24q-3 Base
120v – 0.14amp max
277v – 0.07amp max
1001FD18M7U
(Advance Mark7 – 120/277v)
18w Triple, GX24q-3 Base
120v – 0.18amp max
277v – 0.09amp max
1001FD26M7U
(Advance Mark7 – 120/277v)
26w Triple, GX24q-3 Base
120v – 0.26amp max
277v – 0.11amp max
1001CL
1001CD
1001WH
1001CLSW
1001CDSW
1001WHSW
1001CLDW
1001CDDW
1001WHDW
1001HCL
1001HCD
1001HWH
1001HCLSW
1001HCDSW
1001HWHSW
Clear Lens
1001HCLC
1001HCDC
1001HWHC
Fresnel
1001HCLF
1001HCDF
1001HWHF
Opal Lens
1001HCLO
1001HCDO
1001HWHO
1001HACB
1001HWHCB
Universal Series Reflector Trims
(Not all lamping compatible. Reference Trim Spec Sheet)
Performance
Cone
Cone Satin
Cone
Baffle Wall
Wash
Wet
Location
1013CFL
1013CDCFL
1012*
1013*
1013BK*
1013WH
1013CD*
1071
1045
1046
1046CD
1008*
1010*
1005*
1005BNM
1005WH
1076
1076WH
1035
1035WH
1085
1095
1096
1096CD
1024
1078
*Add NM sufx to catalog number for Natural Metal ange and nish.
Features
1. Mounting Frame: 036" (#20ga.) Galvanized Steel. Accommodates all ceilings
up to 1-1/2" thick; including existing or inaccessible areas.
2. Trim Clips: “Push In / Twist Out” Stainless Steel clips hold reflector flush to
ceiling.
3. Junction Box: 2" x 4" x 3-1/2" (22cu.in.) .032" (#22ga.) galvanized steel. UL
Listed for maximum of 8 (#12ga.) through branch circuit conductors.
4. UniFrame™ Mounting System – Grid Ceiling: Tool free mounting in grid
ceilings. .036" (20ga.) Galvanized Steel interlocking slide bars adjust to 24-1/8"
long accommodating 24" O.C. Ceiling Grid. Adjustable speed clamps for positive
attachment to grid ceiling systems.
5. UniFrame™ Mounting System – Wood Joist Ceiling: Integral nailing tabs,
alignment guides, fastener holes and bendable strapping guides for wood joist
installation. Galvanized Steel interlocking slide bars adjust from 12-15/16" to
24-1/8" long to accommodate 16" and 24" O.C. joist spacing, with or without
strapping.
6. Ballast: 120V – 277V UL Listed Electronic Ballast, end of lamp life protection,
class “P” thermally protected, class “A” sound rating.
7. Socket: Four-pin base, molded thermoplastic socket, prewired with No. 18
AWM leads to ballast.
8. Socket Housing: .036" (#20ga.) Galvanized Steel housing attaches to reflector
trim by spring clip for precise optic alignment.
Accessories
1967B Extra Thick Ceiling Adapter (2" thk)
Labels
cULus Listed. Suitable for Damp Locations.