Philips selecon plcyc1 MKII Instruction Manual

For PLCYC1MKII

Philips Selecon Offices
The material in this manual is for information purposes only and is subject to change without notice. Philips
Selecon assumes no responsibility for any errors or omissions which may appear in this manual. For comments and
suggestions regarding corrections and/or updates to this manual, please visit the Philips Selecon web site at
www.seleconlight.com or contact your nearest Philips Selecon office.
El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso. Philips
Selecon no asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier comentario, sugerencia
o corrección con respecto a este manual, favor de dirijirlo a la oficina de Philips Selecon más cercana.
Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten. Philips
Selecon uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch auftreten. Für
Bemerkungen und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen und/oder
Aktualisierungen in diesem Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten Philips Selecon-
Niederlassung aufzunehmen.
Le matériel décrit dans ce manuel est pour information seulement et est sujet à changements sans préavis. La
compagnie Philips Selecon n'assume aucune responsibilité sur toute erreur ou ommission inscrite dans ce manuel.
Pour tous commentaires ou suggestions concernant des corrections et/ou les mises à jour de ce manuel, veuillez s'il
vous plait contacter le bureau de Philips Selecon le plus proche.
Note: Information contained in this document may not be duplicated in full or in part by any person without prior written
approval of Philips Selecon. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The
use of this document for all other purposes is specifically prohibited.
Document Number: 02.9701.2202
Version as of: 01 September 2015
PLCYC1 MKII LED Luminaire Installation & User’s Manual
©2015 Philips Group. All rights reserved.
Philips Selecon - Dallas
10911 Petal Street
Dallas, TX 75238
Tel: [phone]
Fax: [phone]
Philips Selecon - Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: [phone]
Fax: [phone]
Philips Selecon - Asia Limited
Unit C, 14/F, Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: [phone]
Fax: [phone]
Philips Selecon - Europe
Rondweg zuid 85
Winterswijk 7102 JD
The Netherlands
Tel: [phone]
Website:
www.seleconlight.com

1
PLCYC1 MKII LED Luminaire Installation & User’s Manual
IMPORTANT INFORMATION
Warnings and Notices
Additional Resources for DMX512
For more information on installing DMX512 control systems, the following publication is available for purchase
from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide
for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:
USITT
315 South Crouse Avenue, Suite 200
Syracuse, NY 13210-1844
Phone: [phone] or 1.315.463.6463
www.usitt.org
Philips Selecon Limited Three-Year Warranty
Philips Selecon offers a three-year limited warranty of its luminaires against defects in materials or workmanship
from the date of delivery. A copy of the Philips Selecon three-year limited warranty containing specific terms and
conditions can be obtained from the Philips Selecon web site at www.seleconlight.com or by contacting your local
Philips Selecon office.
PLCYC1 MKII LED Luminaire powerful LED engine offers exceptional performance and life. Under normal
operating conditions, our LED engine has a life expectancy in excess of 50,000 hours, however under worst case
operating conditions with the luminaire set to continuous full output it is possible that a small percentage of LED’s
may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against
premature failure of the LED engine.
When using electrical equipment, basic safety precautions should always be followed including the following:
a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b. Do not use outdoors.
c. Do not mount near gas or electric heaters.
d. Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.
e. The use of accessory equipment not recommended by the manufacturer may cause an unsafe
condition.
f. Do not use this equipment for other than intended use.
g. Refer service to qualified personnel.
SAVE THESE INSTRUCTIONS.
WARNING: You must have access to a main circuit breaker or other power disconnect device
before installing any wiring. Be sure that power is disconnected by removing fuses or turning the
main circuit breaker off before installation. Installing the device with power on may expose you to
dangerous voltages and damage the device. A qualified electrician must perform this installation.
WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to
use proper cable can result in damage to equipment or danger to personnel.
WARNING: This equipment is intended for installation in accordance with the National Electric
Code® and local regulations. It is also intended for installation in indoor applications only. Before
any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid
shock or damage to the control. It is recommended that a qualified electrician perform this
installation.

Installation & User’s Manual PLCYC1 MKII LED Luminaire
2TABLE OF CONTENTS
TABLE OF CONTENTS
Philips Selecon Offices........................................................................................................ Inside Front Cover
IMPORTANT INFORMATION
Warnings and Notices...................................................................................................................................... 1
Additional Resources for DMX512................................................................................................................. 1
Philips Selecon Limited Three-Year Warranty ............................................................................................... 1
TABLE OF CONTENTS
PREFACE
About this Manual .................................................................................................................................................. 3
Accessories ............................................................................................................................................................. 3
PLCYC1 MKII LED Luminaire Power Input Cables ..................................................................................... 3
PLCYC1 MKII LED Luminaire Clamps ........................................................................................................ 3
PLCYC1 MKII LED Luminaire USB Luminaire Software Cable ................................................................. 3
PLCYC LED LUMINAIRE OVERVIEW
PLCYC1 MKII LED Luminaire Components........................................................................................................ 4
Major Luminaire Components ........................................................................................................................ 4
Luminaire Connections and LCD Display ...................................................................................................... 4
LCD Display / Menu System .......................................................................................................................... 5
INSTALLATION AND SET UP
Power Requirements............................................................................................................................................... 6
Connecting Power................................................................................................................................................... 6
Connecting to the DMX512 Network..................................................................................................................... 7
Mounting ................................................................................................................................................................ 8
Tilt Adjustments ..................................................................................................................................................... 8
OPERATION AND PROGRAMMING
LCD Menu Operation............................................................................................................................................. 9
LCD Menu System ............................................................................................................................................... 10
Menu Structure ..................................................................................................................................................... 11
Security................................................................................................................................................................. 13
Locking Fixture ............................................................................................................................................. 13
Presets................................................................................................................................................................... 14
Editing Preset Names .................................................................................................................................... 14
Settings ................................................................................................................................................................. 14
DMX CONTROL
16-Bit Mode.......................................................................................................................................................... 16
8-Bit Mode............................................................................................................................................................ 18
DMX 5-Channel (5-Chan) Mode.......................................................................................................................... 20
PLCYC1 MKII LED Luminaire DMX Timing Channel Detail........................................................................... 20
CLEANING AND CARE
Special Cleaning and Care Instructions................................................................................................................ 26
Front Lens / Reflector Cleaning ........................................................................................................................... 26
Service and Maintenance...................................................................................................................................... 26
Accessories ........................................................................................................................................................... 27
TROUBLESHOOTING
Troubleshooting Guide ......................................................................................................................................... 28
TECHNICAL SPECIFICATIONS
PLCYC1 MKII LED Luminaire Operational Specifications ............................................................................... 29
PLCYC1 MKII LED Luminaire Dimensions....................................................................................................... 29

About this Manual 3
PLCYC1 MKII LED Luminaire Installation & User’s Manual
PREFACE
1. About this Manual
The document provides installation and operation instructions for the following products:
• PLCYC1 MKII LED Luminaire (PLCYC1MKII1-03-).
Please read all instructions before installing or using this product. Retain this manual for future reference. Additional
product information and descriptions may be downloaded at www.seleconlight.com
Note: All PLCYC1 MKII LED Luminaires are universal voltage (100VAC to 240VAC, Auto-ranging).
2. Accessories
Contact your Authorized Philips Selecon Dealer for price and availability of all accessories for PLCYC1 MKII LED
Luminaires. Additional information can be found on the Philips Selecon web site at www.seleconlight.com.
PLCYC1 MKII LED Luminaire Power Input Cables
PLCYC1 MKII LED Luminaire Clamps
PLCYC1 MKII LED Luminaire USB Luminaire Software Cable
Part Number Description
PC1BE PLCYC1 MKII LED Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon without
Connector (user to supply AC connector)
PC1GP PLCYC1 MKII LED Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Stagepin
Connector
PC1GTL PLCYC1 MKII LED Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Twistlock
Connector
PC1GR PLCYC1 MKII LED Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Edison
Connector
PC3PC PLCYC1 MKII LED Luminaire PowerCon Male to PowerCon Female 2.5 Meter Cable for
interconnection between units
Part Number Description
SC Selecon Molded Yoke rated C-Clamp
MC Mega Claw, Black Anodized
Part Number Description
PEGASUS USB Luminaire Software Programming Kit (for updating luminaire firmware) - includes USB Upload
Cable, QuickStart Guide, and Carry Bag

Installation & User’s Manual PLCYC1 MKII LED Luminaire
4PLCYC LED LUMINAIRE OVERVIEW
PLCYC LED LUMINAIRE OVERVIEW
1. PLCYC1 MKII LED Luminaire Components
Major Luminaire Components
Figure 1: PLCYC LED Luminaire Components
Luminaire Connections and LCD Display
Figure 2: PLCYC1 MKII LED Luminaire - Rear View
1) PLCYC LED Luminaire Head
2) LCD Display Menu System (see "LCD Display / Menu System" on page 5 for more information)
3) Tilt Axis Point / Locking Handle
4) Yoke / Mounting Point
1
4
32
Front of Unit Rear of Unit
A
C
E
F
B
D
G
PowerCon (AC) Input
PowerCon (AC) Output
DMX512 Input
DMX512 Output / Thru
Yoke Assembly
Yoke Adjustment / Locking Knob
LCD Display & Menu System
A
E
F
B
D
G
C
Rear View

PLCYC1 MKII LED Luminaire Components 5
PLCYC1 MKII LED Luminaire Installation & User’s Manual
LCD Display / Menu System
Figure 3: LCD Display & Menu System
1) LCD Display (Menu System)
2) Preset / Intensity / Menu Access Buttons
3) Function (Menu System) Select Push Buttons
1
Note: For Menu operation and programming details,
refer to "LCD Menu Operation" on page 9.
2
3

Installation & User’s Manual PLCYC1 MKII LED Luminaire
6INSTALLATION AND SET UP
INSTALLATION AND SET UP
1. Power Requirements
WARNING! The PLCYC1 MKII LED Luminaire should be connected to a constant circuit or a relay device. It
should never be connected to a dimmer or circuit controlled by a dimmer.
The PLCYC1 MKII LED Luminaire operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire
contains an auto-ranging power supply. Depending on supply voltage, each luminaire can draw up to 140 Watts. The
maximum through current should not exceed 20 Amps*.
WARNING! *The Maximum Allowable Input Current of 20 Amps (and the maximum power supply limit of 140
Watts). Do not overload circuits! Must be supplied by a branch circuit protected by a maximum 20 Amp circuit
protector. Doit être alimenté par un circuit de dérivation protégé par un maximum de 20 ampères circuit
protecteur. Do not overload circuits!
IMPORTANT AC POWER CONNECTION NOTES:
a. Must be supplied by a branch circuit protected by a maximum 20 Amp
circuit protector. Doit être alimenté par un circuit de dérivation protégé
par un maximum de 20 ampères circuit protecteur.
b. When using the daisy-chain connection method, ONLY connect PLCYC1
MKII LED Luminaires to AC Output Connection of PLCYC1 MKII LED
Luminaires. DO NOT CONNECT OTHER TYPES OF LUMINAIRES
OR DEVICES!
c. Use only use approved cable types.
d. Do not overload circuits!
e. Do not connect PLCYC1 MKII LED Luminaires to dimmed circuits.
f. The MAXIMUM allowable number of PLCYC1 MKII LED Luminaires
which can be 'daisy-chained' on one power feed should not exceed
ratings. DO NOT EXCEED!
2. Connecting Power
Units can be powered in one of two ways:
• Direct connection to a AC power source using an AC input cable.
• Daisy chain connection using a interconnect AC cable.
AC Input Connection AC Output Connection
(to next luminaire, optional)

Connecting to the DMX512 Network 7
PLCYC1 MKII LED Luminaire Installation & User’s Manual
If the unit is supplied with an AC input cable but you did not order an AC input connector, Table 1 describes how to
connect power to your PLCYC1 MKII LED Luminaire. Field wiring of the PLCYC1 MKII LED Luminaire is
straight forward. A total of 3 wires/conductors need to be brought to the unit. The following wiring scheme is
required:
Table 1: PLCYC1 MKII LED Luminaire AC Input
Connections
3. Connecting to the DMX512 Network
Basic DMX512 installation consists of connecting multiple PLCYC1 MKII LED Luminaires together (up to 30
luminaires) in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the DMX
connector on the first PLCYC1 MKII LED Luminaire. Another cable runs from the other DMX connector on the first
unit to a DMX connector on the next PLCYC1 MKII LED Luminaire (or DMX512 device to be controlled).
Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on
page 1. For PLCYC1 MKII LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 16.
Figure 4: PLCYC1 MKII LED Luminaire - DMX512 Connections
Wire Color Purpose
Brown Main / Line (120 to 240VAC)
Blue Neutral
Green/Yellow Ground
Neutral Main /
Ground / Earth
Line
AC Input Connector
(on back of unit)
DMX512
DMX512 (out from first
to second luminaire)
DMX512 (out to the next luminaire or DMX512
controlled device)
PLCYC1 MKII LED Luminaires
(from console or
control device)
DMX512 Connections
Data Thru
Cable Pinout
Male Conn
Pin 1
Common
(Drain)
Pin 2
Data (-)
Pin 3
Data (+)
Pin 4
Not Used
Pin 5
Not Used
Data In
Cable Pinout
Female Conn
1
2
3
4
5
1
2
3
4
5

Installation & User’s Manual PLCYC1 MKII LED Luminaire
8INSTALLATION AND SET UP
4. Mounting
PLCYC1 MKII LED Luminaires offer a plastic
monocoque yoke design for mounting by theatrical
clamps or hooks (sold separately).
For optimum performance and use, PLCYC1 MKII
LED Luminaires should be mounted and spaced as
shown in Figure 5.
How to read Figure 5:
• S = Spacing between fixtures
• D = Distance from fixture to projection surface.
• A ratio of S = D x 0.9 is the formula used to cal-
culate the optimum spacing for these fixtures.
WARNING! Before attempting any installation or
service, disconnect all power at power source.
Turning off the output of the luminaire does not
disconnect power. Installation and service should
only be performed by a trained and qualified
professional. Be sure to check circuit capacity
before installing luminaires.
5. Tilt Adjustments
To adjust luminaire tilt position:
Step 1. As shown in Figure 6, at tilt locking handle, loosen handle by twisting to the left.
Figure 6: Tilt Adjustments
Step 2. Position tilt (up or down) luminaire head assembly as desired.
Step 3. Hand-tighten, but do not over tighten, tilt locking handle.
SD
gure 5: PLCYC1 MKII LED Luminaire Hanging / Spacing
Tilt Locking
Yoke Assembly
Luminaire
Head Assembly
Handle
R 5.7 in. /
143.5 mm
R 7.7 in. /
195.0 mm
1.2 in. /
30.2 mm
6.7 in. /
170.5 mm
9.5 in. /
240.4 mm

LCD Menu Operation 9
PLCYC1 MKII LED Luminaire Installation & User’s Manual
OPERATION AND PROGRAMMING
1. LCD Menu Operation
The PLCYC1 MKII LED Luminaire’s LCD Display and Menu System provides local control for accessing all the
fixture’s status information, menu options, and settings.
Note: If there are multiple luminaires in a system, changes would need to be made at each LCD Menu as desired.
Upon power up, the LCD will display the main screen showing the product type/name. If DMX is enabled, the
programmed address will appear after power up.
Figure 7: LCD Display and Menu System
Up/Down/Left/Right Arrow Buttons -
Navigates menu system and used for
Escape Button -
Enters menu options. Navigates
OK (Enter) Button -
Accesses details, activates
a field, or enters a setting
depending on the current menu item.
selecting and setting options.
(backs up) one menu level.
PRESET Button -
Allows the recall of
LCD Display -
Displays all menu parameters and
option settings. Also displays DMX512
address (DMX models only).
INTENSITY Button -
Allows the customization of current
intensity (light output). Note, using the
LEFT and RIGHT arrow buttons you can
select each RGBW channel individually
and change their intensity using the UP
and DOWN arrows.
stored presets.

Installation & User’s Manual PLCYC1 MKII LED Luminaire
10 OPERATION AND PROGRAMMING
2. LCD Menu System
The LCD Display Menu system consists of several categories. Use the four arrow buttons as required (refer to Figure
7 on page 9) to access and make changes to the menu items. When the desired menu item is reached, press [OK] to
display the menu options. Use navigation and [OK] buttons to view status and configure the LCD Menu as required.
Note: Refer to "Menu Structure" on page 11 for complete structure and settings.
To navigate and access menu settings/selections:
Step 1. At Main Menu, press [ESC] / [MENU] button once. Another window will appear with sub-menu categories:
• Save as Preset
• Edit a Preset
• Color Mixer
• Settings
• Lock Fixture
• Fixture Status
• Normalize Colors
Step 2. Press [OK] at desired menu item to access and make changes.
Step 3. Make changes as desired.
Note: When DMX512 signal is present, Edit Preset and Color Mixer options will not appear in menu structure.
To navigate fixture status menus:
Step 1. At default screen, press LEFT or RIGHT arrow button once. The default menu screen will change to allow
for quick reference to the following items (note, depending on which arrow button is pressed, status screens
may appear in reverse order):
a. DMX Address (note, if fixture is UNLOCKED, hit [OK] to change DMX address).
b. Fixture Hours (displays fixture operating hours since last reset).
c. Fixture Power (displays Max Power Limit setting (in Watts), Present Power consumed by fixture (in
Watts), and Hours of Use).
d. Fixture Status (displays current operational temperature, LED status, and fan speed setting).
Step 2. Press LEFT or RIGHT arrow buttons to scroll through status screens.
Step 3. Press [ESC] at anytime to access Main Menu.

Menu Structure 11
PLCYC1 MKII LED Luminaire Installation & User’s Manual
3. Menu Structure
Note: See "To navigate and access menu settings/selections:" on page 10 to learn how to access menus. To save
changes, hit [OK]. Press [ESC] to cancel any changes you made.
MAIN MENU
Save a Preset
Sub Menu Options Comments
Select Preset to Save - (Option)
Scrolls and sets current user-defined
color mix to various recallable presets
in the fixture using arrow buttons.
Note: To edit a current (set) preset,
see Edit Presets.
Off Users can:
• Save the current settings (look) to
a specific recallable Preset in the
fixture’s memory.
• Edit the levels (values) for Red,
Green, Blue, White, and Intensity
values (in percent%) by using the
arrow buttons. Once the values
are adjusted, the preset is saved
as desired.
*Only intensities may be stored on
White Color Temperature presets.
RGBW in these presets cannot be
edited or changed.
Scratch Pad
Warm White*
Cool White*
Day Light*
Preset X (5 through 31)
Continued next page
LCD Display /
Menu System

Installation & User’s Manual PLCYC1 MKII LED Luminaire
12 OPERATION AND PROGRAMMING
Menu Structure (continued)
Edit a Preset
Sub Menu Options Comments
Select Preset to Edit - (Option)
Selects a current preset and outputs
the preset, so preset can be edited.
Note: To save a specific look of the
fixture, see Save Presets.
For additional information, refer to
"Presets" on page 14.
Off
Users can:
• Edit the current settings (look) to a
specific recallable Preset in the fix-
ture’s memory.
• Edit the values for Red, Green,
Blue, White, and Intensity values
(in percent%) by using the arrow
buttons.
• Once the values are adjusted, the
"Save Preset" menu option
appears to save the edits.
NOTES:
*Only intensities may be stored on
White Color Temperature presets.
RGBW in these presets cannot be
edited or changed.
**If a Calibrated Preset's Color Mix is
changed (5 thru 25), an asterisk '*' is
appended to the end of the name to
indicate that it has been modified.
This only happens if the name
matches the original calibrated name,
stored in EEPROM. This does not
happen if the Intensity is changed,
only the color mix.
Scratch Pad
Warm White*
Cool White*
Day Light*
Preset X (5 through 31)**
Note: When DMX512 signal is present, Edit a Preset option will not appear in menu structure.
Color Mixer
Sub Menu Options Comments
Select Color or Intensity to Adjust -
(Option)
Red
Users can:
• Edit Red, Green, Blue, White, and
Intensity values (in percent%) by
using the arrow buttons.
• Once the values are adjusted,
press [OK] to save the edits to
scratch pad.
Green
Blue
White
Intensity
Note: When DMX512 signal is present, Color Mix option will not appear in menu structure.
Continued next page
Continued from previous page
Settings
Sub Menu Options Comments
SETTINGS - (Option)
Scrolls and sets the various fixture
settings using arrow buttons.
See "Settings" on page 14 for details.

Security 13
PLCYC1 MKII LED Luminaire Installation & User’s Manual
Menu Structure (continued)
4. Security
Unwanted changes to the Fixture's Configuration or Setting can be controlled by locking the fixture’s menu.
PLCYC1 MKII LED Luminaires are shipped with a default numeric PIN code of "0000" (four zeros). Users may set
their own PIN code (four-digit number) via Settings > General > Set PIN. When setting a PIN code, write it
down and keep it in a secure location. Note, Philips Selecon does not have records of PIN codes established by users
or owners.
Note: Contact Philips Selecon technical support if a unit is locked and the PIN code is lost for instructions on how to
reset luminaire.
Note: If the Fixture is locked when it is powered down the fixture will remain in the locked state when powered up.
Locking Fixture
To lock the fixture:
Step 1. At Main Menu, press [MENU] and scroll to Lock Fixture. Note, default PIN is "0000" (four zeros).
Step 2. Press [OK].
Step 3. Enter four-digit, user-selectable, PIN code.
Step 4. Use [LEFT ARROW] or [RIGHT ARROW] keys to highlight "YES", press [OK] or [ESC] twice to cancel
action.
Step 5. Fixture is now locked if locking process was not canceled as described in previous step.
Continued from previous page
Lock Fixture
Sub Menu Options Comments
Enter PIN Lock / Are you sure?
Use arrow buttons to make selection.
Press [OK] to accept. Note, a PIN
code must be established (set) in
order to lock a fixture. Locking the
fixture will disable access to changing
menu settings. For details, refer to
"Security" on page 13.
Fixture Status
Sub Menu Options Comments
LED Status Information
Scrolls through the various levels.
Depending on the arrow button
pressed, the screens may appear in a
different order that shown in
"Options".
LED 1
Displays LED’s current status (in
percentage%) of Intensity, Red,
Green, Blue, and White elements of
the LED). Fan Speed, operational
LED junction temperature, power
settings.
Levels
Displays DMX levels for each LED
element (Red, Green, Blue, and
White) and total power.
Normalize Colors
Sub Menu Options Comments
Normalize Colors Adjustment of RGBW Intensities
Allows for fine adjustments to color
intensities for near perfect color
matching.

Installation & User’s Manual PLCYC1 MKII LED Luminaire
14 OPERATION AND PROGRAMMING
Note: When the Fixture is Locked only the [ESC]/[MENU] key is functional. Pressing this key will display a request
for a password. When a valid PIN code is entered the fixture is unlocked.
5. Presets
Presets are Color Mixes that are stored in the Fixture, they can be recalled to reproduce a specific output from the
fixture. Presets are made up of a Color Mix; Red, Green, Blue, and White. They also have Intensity associated with
them.
Presets can be recalled via the User interface or by a DMX channel, when under DMX control. The Preset’s Intensity
is applied if the User Interface is used; if DMX, the DMX Intensity channel is used for Intensity.
If the fixture is locked, Presets cannot be changed at the menu.
• Locked Presets are factory Calibrated, and their Color Mix cannot be changed by the user. Their Intensity can be
changed. Three Presets 5 through 25 are Locked.
• Preset 0, the "off" preset is also Locked to the OFF value.
• If the fixture is unlocked, User Presets can have their Color Mix and Intensity changed without restriction.
Note: If the Color Mix of a Factory Calibrated Preset is changed, by turning protection Off, an '*' is appended to the
end of the Preset's Name to indicate that the Calibrated values have been changed.
Note: DMX will take priority over any menu selected preset.
Editing Preset Names
On the Edit Preset screen, the option is available to edit the name of a preset, via Screen button. However, the names
of Presets 0, 2, 3, and 4 cannot be edited. Scratch Pad, preset 1, can be changed but retains its original functionality.
Use the [LEFT ARROW] and [RIGHT ARROW] keys to select the character to be changed and use the [UP
ARROW] and [DOWN ARROW] keys to change that character. The Character Scroll order is A-Z, space, 0-9. If you
are scrolling up the Alpha character displays as Upper Case; if you are scrolling down the Alpha character displays as
Lower Case. Stop on the character you want, ignoring case, then press the opposite [UP ARROW] or [DOWN
ARROW] key if you want to change the case. [OK] to save changes, [ESC] to cancel changes.
6. Settings
Table 2, “Settings Menu User-Settable Parameters,” on page 15 shows the user-settable parameters available in the
Settings menu section.
To edit a value on the Setting Screen, use the [UP ARROW] or [DOWN ARROW] keys to move the highlight to the
settings value you wish to change. Press [OK] to begin editing that value. Use the [UP ARROW], [DOWN
ARROW], [LEFT ARROW] or [RIGHT ARROW] keys to make changes to the value. Press [OK] when complete to
save changes, or [ESC] to cancel changes to that value.
When done making changes on the Settings Screen press [ESC] to re-boot fixture and implement changes. Fixture
will not re-boot if nothing was changed.

Settings 15
PLCYC1 MKII LED Luminaire Installation & User’s Manual
Table 2: Settings Menu User-Settable Parameters
Note: To Exit the Settings screen, use the [ESC] key. [ESC] and [OK] can be used to cancel or save changes to an
individual parameter. However, once a parameter has been accepted, by pressing [OK] that change cannot be undone/
canceled by pressing the [ESC] key.
Parameter Values Default Description
General
Power, Fan
Normal Mode (120W),
Studio Mode (80W), or
Quiet Mode (60W)
Normal Mode
Sets the luminaire’s output mode - Normal
Mode (120W), Studio Mode (80W) or
Quiet Mode (60W).
Power-Up All presets Cool White
Users can set what the default preset is
when the unit is powered up. Factory
default is Cool White.
Red Correct No / Yes No Turns on or off red correction.
Reset Hours No, Yes No Resets luminaire’s operational hours.
Set PIN #### 0 0 0 0 (four zeros) A four-digit user-settable PIN code to lock
the fixture.
Presets
Protected No, 5 - 25 5 - 25 Determines if the factory Presets' Color
Mix is protected from changes.
Load Factory No, Yes No Reload Factory Presets, Intensity changes
will also be reloaded.
DMX
Address 001 to 512 001 DMX512 address. Note, it can be set if
displayed.
Map 8-bit, 16-bit, or 5-Chan 16-bit
Defines size/precision of DMX map. Color
Mixing/Intensity in 16-bit provides higher
resolution for precision control. 5-Chan
provides minimal channel usage.
When no DMX Off, Hold, Hold 8Hr (8
hours), or No Output Hold
If DMX is detected and then goes away,
this defines what will happen to the output.
At end of 8Hr hold Fixture goes to No
Output setting.
Display
Flip Display No, Yes No Flips (inverts) Display and Keypad Arrows.
Adj Contrast 0 - 100% 50% Use left or right arrow keys to adjust
display contrast as desired.
Fixture
Fixture ID Shows Fixture Type - Profile, Cyc, or Fresnel Shows luminaire type.

Installation & User’s Manual PLCYC1 MKII LED Luminaire
16 DMX CONTROL
DMX CONTROL
This section contains information for operating the luminaire using DMX control in 16-Bit, 8-Bit, or 3-Channel (3-
Chan) modes. For Menu options and detailed information, see "Settings" on page 14.
Note: These tables assume a DMX start address of 1. When a different starting address is used, this address becomes
channel 1 function and other functions follow in sequence.
1. 16-Bit Mode
Table 3 provides DMX channel mapping of all DMX512 control values when the PLCYC1 MKII LED Luminaire is
in 16-bit DMX512 mode (as set by the luminaire’s menu system).
Table 3: PLCYC1 MKII LED Luminaire DMX Channel Mapping (16-Bit Mode)
DMX
Channel Parameter Range DMX Range%
Default -
recommended
console default
values
Description
1 Intensity - High 0 - 65535 0 - 100% 0 16-bit control for Intensity of LED settings.
2 Intensity - Low
3 Red - High Byte 0 - 65535 0 - 100% 0 16-bit control of Red LEDs from 0 to full.
4 Red - Low Byte
5 Green - High Byte 0 - 65535 0 - 100% 0 16-bit control of Green LEDs from 0 to full.
6 Green - Low Byte
7 Blue - High Byte 0 - 65535 0 - 100% 0 16-bit control of Blue LEDs from 0 to full.
8 Blue - Low Byte
9 White - High Byte 0 - 65535 0 - 100% 0 16-bit control of White LEDs from 0 to full.
10 White - Low Byte
11 Preset Color Selection 0 - 255 0 - 100% 0
Used to access presets stored in fixture
firmware, such as CCT presets, defined gel
presets, etc.
No Preset Activated = DMX 0-3 (default)
Color Preset 0 (Off) = DMX 4 - 7
Color Preset 1 (Scratch Pad) = DMX 8 - 11
Color Preset 2 (Warm White) = DMX 12 - 15
Color Preset 3 (Cool White) = DMX 16 - 19
Color Preset 4 (Daylight) = DMX 20 - 23
Color Preset 5 (Arc White) = DMX 24 - 27
Color Preset 6 (Red) = DMX 28 - 31
Color Preset 7 (Yellow) = DMX 32 - 35
Color Preset 8 (Daylight Blue) = DMX 36 - 39
Color Preset 9 (Magenta) = DMX 40 - 43
Color Preset 10 (Aqua) = DMX 44 - 47
Color Preset 11 (Medium Amber) = DMX 48 - 51
Color Preset 12 (Lavender) = DMX 52 - 55
Color Preset 13 (Blue) = DMX 56 - 59
Color Preset 14 (Light Pink) = DMX 60 - 63
Color Preset 15 (Green) = DMX 64 -67
Color Preset 16 (Pink) = DMX 68 - 71
Color Preset 17 (Amber White) = DMX 72 - 75
Color Preset 18 (Dark Fuchsia) = DMX 76 - 79
Color Preset 19 (Light Amber) = DMX 80 - 83
Color Preset 20 (Steel Blue) = DMX 84 - 87
Color Preset 21 (Lt Green/Blue) = DMX 88 - 91
Color Preset 22 (Orange) = DMX 92 - 95
Color Preset 23 (Medium Pink) = DMX 96 - 99
Color Preset 24 (Cyan) = DMX 100 - 103
Color Preset 25 (Purple) = DMX 104 - 107
Color Preset 26 (Custom) = DMX 108 - 111
Color Preset 27 (Custom) = DMX 112 - 115
Color Preset 28 (Custom) = DMX 116 - 119
Color Preset 29 (Custom) = DMX 120 - 123
Color Preset 30 (Custom) = DMX 124 - 127
Color Preset 31 (Custom) = DMX 128 - 131
No Preset Activated = DMX 253 - 255

16-Bit Mode 17
PLCYC1 MKII LED Luminaire Installation & User’s Manual
12 Not used (for future use)
13 Intensity Time 0 - 255 0 - 100% 255
Allows for luminaire timing of intensity. Profile
should default to DMX 255 for smoothest
console fade times. Refer to "PLCYC1 MKII LED
Luminaire DMX Timing Channel Detail" on
page 20 for more information on timing values.
14 Color Time 0 - 255 0 - 100% 255
Allows for luminaire timing of LEDs. Profile
should default to DMX 255 for smoothest
console fade times.Refer to "PLCYC1 MKII LED
Luminaire DMX Timing Channel Detail" on
page 20 for more information on timing values.
15 Control 0 - 255 0 - 100% 0
Used to set different modes, parameters, and
functions of the luminaire. Set control channel
value for desired action. Hold value for at least 3
seconds. Set control channel value to 0 without
any scaling.
Default Setting on Console = DMX 0
Display On/Off = DMX 3 - 4
Reset All Settings to Defaults* = DMX 5 - 7
Quiet Mode = DMX 8 - 10
Studio Mode = DMX 11 - 13
Normal Mode* = DMX 14 - 15
Preset 1 Store = DMX 20 - 21
Preset 2 Store (Intensity Only) = DMX 22 - 23
Preset 3 Store (Intensity Only) = DMX 24 - 25
Preset 4 Store (Intensity Only) = DMX 26 - 27
Preset 5 Store = DMX 28 - 29
Preset 6 Store = DMX 30 - 31
Preset 7 Store = DMX 32 - 33
Preset 8 Store = DMX 34 - 35
Preset 9 Store = DMX 36 - 37
Preset 10 Store = DMX 38 - 39
Preset 11 Store = DMX 40 - 41
Preset 12 Store = DMX 42 - 43
Preset 13 Store = DMX 44 - 45
Preset 14 Store = DMX 46 - 47
Preset 15 Store = DMX 48 - 49
Preset 16 Store = DMX 50 - 51
Preset 17 Store = DMX 52 - 53
Preset 18 Store = DMX 54 - 55
Preset 19 Store = DMX 56 - 57
Preset 20 Store = DMX 58 - 59
Preset 21 Store = DMX 60 - 61
Preset 22 Store = DMX 62 - 63
Preset 23 Store = DMX 64 - 65
Preset 24 Store = DMX 66 - 67
Preset 25 Store = DMX 68 - 69
Preset 26 Store = DMX 70 - 71
Preset 27 Store = DMX 72 - 73
Preset 28 Store = DMX 74 - 75
Preset 29 Store = DMX 76 - 77
Preset 30 Store = DMX 78 - 79
Preset 31 Store = DMX 80 - 81
Preset 32 Store = DMX 82 - 83
Color Normalization ON * = DMX 100 - 103
Color Normalization OFF = DMX 104 - 107
Fixture Reset = DMX 108 - 112
Red Correction ON* = DMX 113 - 115
Red Correction OFF = DMX 116 - 118
NOTE: * - Denotes default settings and return
to default when performing control channel
values 5 - 7.
Table 3: PLCYC1 MKII LED Luminaire DMX Channel Mapping (16-Bit Mode)

Installation & User’s Manual PLCYC1 MKII LED Luminaire
18 DMX CONTROL
2. 8-Bit Mode
Table 2-1 provides DMX channel mapping of all DMX512 control values when the PLCYC1 MKII LED Luminaire
is in 8-bit DMX512 mode (as set by the luminaire’s menu system).
Table 2-1: PLCYC1 MKII LED Luminaire DMX Channel Mapping (8-Bit Mode)
DMX
Channel Parameter Range DMX Range%
Default -
recommended
console default
values
Description
1 Intensity 0 - 255 0 - 100% 0 8-bit control for Intensity of LED settings.
2 Red 0 - 255 0 - 100% 0 8-bit control of Red LEDs from 0 to full.
3 Green 0 - 255 0 - 100% 0 8-bit control of Green LEDs from 0 to full.
4 Blue 0 - 255 0 - 100% 0 8-bit control of Blue LEDs from 0 to full.
5 White 0 - 255 0 - 100% 0 8-bit control of White LEDs from 0 to full.
6 Preset Color Selection 0 - 255 0 - 100% 0
Used to access presets stored in fixture
firmware, such as CCT presets, defined gel
presets, etc.
No Preset Activated = DMX 0-3 (default)
Color Preset 0 (Off) = DMX 4 - 7
Color Preset 1 (Scratch Pad) = DMX 8 - 11
Color Preset 2 (Warm White) = DMX 12 - 15
Color Preset 3 (Cool White) = DMX 16 - 19
Color Preset 4 (Daylight) = DMX 20 - 23
Color Preset 5 (Arc White) = DMX 24 - 27
Color Preset 6 (Red) = DMX 28 - 31
Color Preset 7 (Yellow) = DMX 32 - 35
Color Preset 8 (Daylight Blue) = DMX 36 - 39
Color Preset 9 (Magenta) = DMX 40 - 43
Color Preset 10 (Aqua) = DMX 44 - 47
Color Preset 11 (Medium Amber) = DMX 48 - 51
Color Preset 12 (Lavender) = DMX 52 - 55
Color Preset 13 (Blue) = DMX 56 - 59
Color Preset 14 (Light Pink) = DMX 60 - 63
Color Preset 15 (Green) = DMX 64 -67
Color Preset 16 (Pink) = DMX 68 - 71
Color Preset 17 (Amber White) = DMX 72 - 75
Color Preset 18 (Dark Fuchsia) = DMX 76 - 79
Color Preset 19 (Light Amber) = DMX 80 - 83
Color Preset 20 (Steel Blue) = DMX 84 - 87
Color Preset 21 (Lt Green/Blue) = DMX 88 - 91
Color Preset 22 (Orange) = DMX 92 - 95
Color Preset 23 (Medium Pink) = DMX 96 - 99
Color Preset 24 (Cyan) = DMX 100 - 103
Color Preset 25 (Purple) = DMX 104 - 107
Color Preset 26 (Custom) = DMX 108 - 111
Color Preset 27 (Custom) = DMX 112 - 115
Color Preset 28 (Custom) = DMX 116 - 119
Color Preset 29 (Custom) = DMX 120 - 123
Color Preset 30 (Custom) = DMX 124 - 127
Color Preset 31 (Custom) = DMX 128 - 131
No Preset Activated = DMX 253 - 255
7Not used (for future use)
8 Timing 0 - 255 0 - 100% 255
Allows for timing control of both the intensity and
color parameters. Channel should default to 255
for smoothest actions using console and/or
manual fades. Refer to "PLCYC1 MKII LED
Luminaire DMX Timing Channel Detail" on
page 20 for more information.