Philips MCB146/05 User manual

Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
MCB146
1
Quick Start Guide
2
User Manual
Quick Start Guide User Manual
3
1
2
Remote Control
MCB146_05_QSG_Eng 4/2/10, 13:421

1
2
Connection
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
Tip:
It is unnecessary to connect the DAB/
FM antenna since it is fixed to the
main unit.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source
select keys on the remote control (DISC
or AUX, for example).
–Then select the desired function
(2;, 4, ¢for example).
speaker
(right)
speaker
(left)
B
C
DAB/ FM wire antenna
AC power cord
1
2
MCB146_05_QSG_Eng 4/2/10, 13:422

5
1
2
3
4
Setting the clock
In standby mode, press and hold DISPLAY/CLOCK on the
remote control set for 2 seconds.
Press PROG on the remote control to select 12-hour
or 24-hour display.
Press DISPLAY/CLOCK to confirm.
➜The clock digits for the hours flash.
Press 4/¢to set the hours.
Press DISPLAY/CLOCK again.
➜The clock digits for the minutes flash.
Press 4/¢to set the minutes.
Press DISPLAY/CLOCK to confirm the time.
6
7
1
2
3
4
5
Playing a disc
Select CD source.
Lift the CD door on the top of the system to open the CD compartment.
Insert a disc with the printed side facing up and press down
on PULL TO OPEN to close the CD door.
Press 2; to start playback.
Press 9to stop playback.
MCB146_05_QSG_Eng 4/2/10, 13:423

© Royal Philips Electronics N.V. 2010
All rights reserved.
http://www.philips.com MCB146_05_QSG_V3.0
Tip:
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Programming and tuning to FM
stations
Select FM TUNER source.
1
2Press SCAN for more than two seconds to program all
available stations (FM only).
Press PRESET +/- ( or 3/4on the remote control) until the
desired preset station is displayed.
3
1
2
Press SOURCE (or DAB on the remote control) to select
DAB to start an automatic search of available DAB stations.
Press 4/¢to change the DAB stations.
Tuning to DAB stations
5To access setup options, press MENU, then use the navigation
control buttons to select.
3Press 2; to confirm a selection.
4To perform a local scan (in UK ), press briefly SCAN.
To perform a full scan (outside UK ), press and hold SCAN.
MCB146_05_QSG_Eng 4/2/10, 13:424