Philips M2740A C05 Quick start guide

11.10.2007 1/11 001 2007/409 MA0285.0
Size:
3
4
5
10
Installation Notes for
Philips M2740A #C05, FM20/30-System-Cart
Contents
Screws :
M3,5x10 (4x) for Avalon CTS
M4x20 (4x) incl. washers for display
M4x16 (4x)
M12x30 (2x) incl. lock washer for monitor column
M4x10 (4x) bolts for FM20/30-monitor
M6x12 (4x) bolts for runner for Foot-Location
Caps for D6,5 mm (2x)
Attached tools
Antenna Holder Kit
angle mounted Pull relief sheet
Pair of runners for Foot-Location

11.10.2007 2/11 MA0285.0
Unlocking rear panel
Remove flat bin pushing before removing panel
Key 1 placed at shelf
Key 2 placed in drawer (in plastic bag)

11.10.2007 3/11 MA0285.0
Demounting of front lower shelf
Mounting of monitor column
Attach column with
screws: M12x30 (2x)
A
AA
A
A
AA
A
Use lock washer (1x)

11.10.2007 4/11 MA0285.0
Placing of transformator and power supply
Mount bar after placing equipment
Placing of PC-housing

11.10.2007 5/11 MA0285.0
Placing of Avalon CTS
Remove Avalon drawer
B
BB
B
C
CC
C
B
BB
B
Using the pull relief sheet
optional
Remove screw with
TORX T10 Place IEC 320 in sheet Place sheet an IEC 320 in Avalon CTS Fix screw with TORX T10

11.10.2007 6/11 MA0285.0
Screw Avalon CTS with
M3,5 x 10 (4x)
Mounting of display
Fix display with 2. hand while screwing
screws: M4x20 (4x)
M4x16 (4x)
depending on flat screen
Optional: M4 washers
C
CC
C
1
2
3
1 2
3
Cable “3” optional

11.10.2007 7/11 MA0285.0
Placing of the keyboard
Placing of FM20/30-monitor
CLICK!!!

11.10.2007 8/11 MA0285.0
Preparing cart for FM40/50-monitor
Attach runners with
screws: M6x12 (4x) Cap drillings with
caps
6,5mm (2x)

11.10.2007 9/11 MA0285.0
Fix flat bin pushing before placing panel
Locking rear panel
Lock rear panel and keep key in a secure
place

11.10.2007 10/11 MA0285.0
Option: Mounting of antenna holder
Fix antenna cable with cable winder
Cut off cable winder

11.10.2007 11/11 MA0285.0
Use cable winder in power column to fix
antenna cable