Philips CD Soundmachine AZ1852 User manual

Register your product and get support at AZ1852
EN User manual

EN
1 Important
Safety
Important Safety Instructions
aRead these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
hDo not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers)
that produce heat.
iProtect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
j Only use attachments/accessories specied by the
manufacturer.
kUse only with the cart, stand, tripod, bracket, or table
specied by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.

lUnplug this apparatus during lightning storms or when
unused for long periods of time.
m Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
nBattery usage CAUTION – To prevent battery leakage which
may result in bodily injury, property damage, or damage to
the unit:
Install all batteries correctly, + and - as marked on the unit.•
Do not mix batteries (old and new or carbon and alkaline,•
etc.).
Remove batteries when the unit is not used for a long time.•
The batteries shall not be exposed to excessive heat such as•
sunshine,reorthelike.
oApparatus shall not be exposed to dripping or splashing.
pDo not place any sources of danger on the apparatus (e.g.
liquid lled objects, lighted candles).
qThis product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
Alliance: www.eiae.org.

Warning
Never remove the casing of this apparatus.•
Never lubricate any part of this apparatus.•
Never place this apparatus on other electrical equipment.•
Keepthisapparatusawayfromdirectsunlight,nakedamesorheat.•
Never look into the laser beam inside this apparatus.•
Ensure that you always have easy access to the power cord, plug or•
adaptor to disconnect this apparatus from the power.
Hearing Safety
Listen at a moderate volume:
Using headphones at a high volume can impair your hearing.•
This product can produce sounds in decibel ranges that may
cause hearing loss for a normal person, even for exposure less
than a minute. The higher decibel ranges are offered for those
that may have already experienced some hearing loss.
Sound can be deceiving. Over time your hearing ‘comfort•
level’ adapts to higher volumes of sound. So after prolonged
listening, what sounds ‘normal’ can actually be loud and
harmful to your hearing. To guard against this, set your volume
to a safe level before your hearing adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting.•
Slowly increase the sound until you can hear it comfortably•
and clearly, without distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even at normally ‘safe’ levels,•
can also cause hearing loss.
Be sure to use your equipment reasonably and take•
appropriate breaks.

Be sure to observe the following guidelines when using your
headphones.
Listen at reasonable volumes for reasonable periods of time.•
Be careful not to adjust the volume as your hearing adapts.•
Do not turn up the volume so high that you can’t hear what’s•
around you.
You should use caution or temporarily discontinue use in•
potentially hazardous situations.
Do not use headphones while operating a motorized vehicle,•
cycling,skateboarding,etc.;itmaycreateatrafchazardandis
illegal in many areas.
Where the MAINS plug or an appliance coupler is used as the•
disconnect device, the disconnect device shall remain readily
operable.
Caution
Use of controls or adjustments or performance of procedures other•
than herein may result in hazardous radiation exposure or other
unsafe operation.
Notice
This product complies with the radio interference requirements of
the European Community.
Anychangesormodicationsmadetothisdevicethatarenot
expressly approved by Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.

Recycling
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When you see the crossed-out wheel bin symbol attached to a
product, it means the product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other household waste. Please
inform yourself about the local rules on the separate collection of
electrical and electronic products. The correct disposal of your old
product helps prevent potentially negative consequences on the
environment and human health.
Your product contains batteries covered by the European Directive
2006/66/EC, which cannot be disposed of with normal household
waste.
When you see the crossed-out wheel bin symbol with the chemical
symbol ‘Pb’, it means that the batteries comply with the requirement
set by the directive for lead:
Please inform yourself about the local rules on separate collection of
batteries. The correct disposal of batteries helps prevent potentially
negative consequences on the environment and human health.
Recording and playback of material might require consent. See
Copyright Act 1956 and The Performer’s Protection Acts 1958 to
1972.

Environmental information
All unnecessary packaging has been omitted. We have tried to make
the packaging easy to separate into three materials: cardboard (box),
paper pulp (buffer) and polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
The making of unauthorized copies of copy-protected material,
includingcomputerprograms,les,broadcastsandsoundrecordings,
may be an infringement of copyrights and constitute a criminal
offence. This equipment should not be used for such purposes.
Trademark notice
Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United States
and/or other countries.
This apparatus includes this label:

2 Your CD Soundmachine
Introduction
With this apparatus, you can enjoy music from audio discs, external
devices, and listen to radio stations.
The apparatus offers you multiple sound effect settings that enrich
sound with Dynamic Bass Boost (DBB).
The apparatus supports the following media formats:
Note
The type plate is located on the back of the apparatus.•
What’s in the box
Check and identify the contents of the package:
Main unit•
AC power cord•
Remote control•
User Manual•

Quick Start Guide•
Overview of the main unit
aAntenna
b
USB socket.•
c Source selector:CD, USB, FM, TAPE (OFF).
Select source and turn on/off the unit.•
dLIFT-OPEN
Open/Close the CD compartment•
b
a
c
e
d
h
g
f
i
j
k
l
s
q
r
o
p
n
m
BATTERY SUPPLY: 6 x 1.5V R14/ UM2/ C CELL
UPPER 2
LOWER 2
u
t

eVOLUME
Adjust volume.•
f
Fast rewind/wind the tape.•
g
Stop the tape or open the tape compartment.•
h
Pause tape Play.•
i
Start or pause CD play•
j/
Skip to the previous/next track.•
Search within a track.•
k
Stop play or erase a program.•
lUSB REC
Record from a disc to a USB device.•
mMODE
Select a play mode: REPEAT or SHUFFLE.•
nDBB
Turn on/off dynamic bass boost.•
oIR
Remote control sensor.•
pDisplay panel
Display current status.•
q
Start tape Record.•
r
Start tape play.•
sTUNING

Tune to radio stations•
t
Headphone socket.•
uMP3 LINK
Ja• ck for an external audio device.
Overview of the remote control
a/
Search within a track.•
b
Stop play.•
Erase a program.•
a
d
e
f
g
c
b
i
h

c
Start or pause play.•
d/
Skip to the previous/next track.•
eAL-/AL+
Skip to the previous/next album.•
fMODE
Select a play mode: REPEAT or SHUFFLE•
gDEL
DeleteaudiolesstoredonaUSBdevice.•
hREC
Record from a disc to a USB device.•
iPROG
Program tracks.•
3 Get started
Caution
Use of controls or adjustments or performance of procedures other•
than herein may result in hazardous radiation exposure or other
unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number
of your apparatus.The model number and serial number are on the
bottom of your apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Install batteries
Note
You can use both batteries and AC power as power supply of this•
apparatus.
Batteries are not supplied with the accessories.
•
1Open the battery compartment.
2Insert 6 batteries (type: R-14, UM-2 or C-cells) with correct
polarity (+/-) as indicated.
3Close the battery compartment.
BATTERY SUPPLY: 6 x 1.5V R14/ UM2/ C CELL
UPPER 2
LOWER 2

Prepare the remote control
Caution
Riskofexplosion!Keepbatteriesawayfromheat,sunshineorre.•
Neverdiscardbatteriesinre.
Risk of decreased battery life! Never mix different brands or types
•
of batteries.
Risk of product damage! When the remote control is not used for
•
long periods, remove the batteries.
For rst-time use:
1Remove the protective tab to activate the remote control
batteries.
To replace the remote control batteries:
1Open the battery compartment.
2Insert 1 CR2025 batterie with correct polarity (+/-) as
indicated.
3Close the battery compartment.

Connect power
Warning
Risk of product damage! Ensure that the power supply voltage•
corresponds to the voltage printed on the back or the underside of
the apparatus.
Risk of electric shock! When you disconnect the AC power, always
•
pull the plug from the socket. Never pull the cord.
Note
Install the apparatus near the power supply socket and where the•
power plug can be easily reached.
1Connect the AC power cord to the AC input jack on the
apparatus and to the power supply socket.
To switch the apparatus off completely, disconnect the AC•
power cord from the power supply socket.
Note
To save energy: turn off the apparatus after use.•

4 Play
Play CD
1Slide the source selector to CD.
2Pull LIFT-OPEN to open the disc tray.
3Insert a disc with the printed side facing up, then close the disc
tray.
Play starts automatically.»
To pause/resume play, press• .
To stop play, press• .
Press• AL-/AL+ to select an album.
To skip to a track, press• / .
To search within a track, press and hold• / . Release the
button to resume normal play.

Play tape
1Slide the source selector to TAPE.
2Press on main unit to open the tape door.
3Load the tape with the open side upward and the full spool to
the left.
4Press on main unit to start play.
To pause/resume play, press• on main unit .
To rewind or fast-forward, press• / on main unit .
To stop play, press• .
Play from USB devices
Note
Ensure that the USB device contains playable audio contents.•
1Connect the USB device to the socket.
2Slide the source selector to USB.
3Press AL-/AL+ to select a folder.
4Press / toselectale.
5Press to start play.
To stop play, press• .
To pause or resume play, press• .
Listen to an external device
You can listen to an MP3 player through this apparatus.

1Use a cable with 3.5mm plugs on both ends (not supplied) to
connect MP3 LINK jack (3.5mm) on this apparatus and the
headphone jack on an MP3 player.
5 Play options
Adjust volume level
1During play, turn VOLUME to increase/decrease the volume
level.
Enhance bass
1During play, press DBB to turn on or off dynamic bass
enhancement.
If DBB is activated, DBB is displayed.»
Select play modes
1Press MODE repeatedly to select a play mode:
• [/] (repeat) – repeat a track
[• ALL] (repeat all) - repeat an entire CD/program
[• ](shufe)-playtracksrandomly
2To return to normal play, press MODE repeatedly until play
mode icons are no longer displayed.

Tip
Only•and AL can be selected when you play programmed
tracks.
WhenplayCD,ModeshouldbeRepeat/RepeatAll/Shufe.
•
When Mp3, Mode should be Repeat/Repeat Album/Repeat All/•
Shufe.
Program tracks
You can program a maximum of 20 tracks.
1In CD/USB mode, at the stop position, press PROG to activate
the program mode.
[PROG] (program) starts to blinks.»
2For MP3/WMA tracks, press AL-/AL+ to select an album.
3Press / to select a track number, then press PROG to
conrm.
4Repeat steps 2 to 3 to program more tracks.
5Press on the main unit to play the programmed tracks.
During play, [PROG] is displayed.»
To erase the program, in the stop position, press• .
To review the program, in the stop position, press and hold•
PROG for more than 2 seconds.
General information on cassette recording
Recording is permissible insofar as copyright or other rights of•
third parties are not infringed.
This deck is not suitable for recording on CHROME (IEC II) or•
METAL (IEC IV) type cassettes. For recording you should use
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.

Check and tighten slack tape before use with a pencil to avoid•
jamming the deck mechanism.
The volume level is set automatically.•
Tip
No recording at beginning 7 seconds.•
Break safeguard tab to prevent the accidental erasure of a recording.•
Record from CD/USB to tape
1Slide the source to CD/USB.
2Insert a CD/USB device.
3(Optional) Set playing sequence (see “ Program tracks “
section).
4Press to open the tape door.
5Insert a blank cassette.
6Press to start recording.
Disc play starts automatically from the beginning of the disc.»
To pause/resume recording, press• .
To stop recording, press• .
Record from radio to tape
1Slide the source selector to FM.
2Rotate TUNING to tune to the radio station.
3Press to open the tape door.
4Insert a blank tape.
5Press to start recording.
To pause/resume recording, press• .
To stop recording, press• .