Philips HTR3464/12 User manual

What’s in the box?
2008 CKoninklijke Philips N.V.
All rights reserved.
www.philips.com
sgpjy_0812/12_14
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
HTR3464
Main Unit Remote Control
and 2 batteries
User
Manual
1 centre, 2 front, 2 rear speakers
and subwoofer
Audio cable
Power cable
Adjusting the speakers
APress 2on main unit to turn it on.
BPress SURR to switch to multi-channel surround
mode.
CPress PROG to access the system setup menu.
To adjust the audio delay for the
centre speaker:
zPress .or >until ‘CENTER DELAY’ appears.
zPress PROG.
zRotate the VOLUME control to change the delay
time.
To adjust the audio delay for the rear speaker:
zPress .or >until ‘REAR DELAY’ appears.
zRotate the VOLUME control to change the delay
time.
DTo confirm all settings, press PROG.
See the accompanying user manual for other
options to ne-tune your speaker settings.
Start Playback
APress 2on the main unit to turn it on.
Note Ensure all the audio/video devices are connected
before you start playback.
BTurn on the connected audio/video device.
CPress PLAY on the connected audio/video device.
DPress DI/AUX to select the preferred audio input
source.
Playback from portable audio
player
Listen to audio from your portable audio player by
connecting the device to your main unit.
AConnect the MP3 LINK cable (supplied) from the
MP3 LINK socket on the main unit to the
headphone output socket on your portable audio
player.
BPress PLAY on your portable audio player.
CPress MP3 LINK to listen to the playback.
See the accompanying user manual for radio
tuning and other playback settings.
2Set up 3Enjoy
Coaxial cable
MP3 LINK cable
for portable audio player
FM wire antenna
Need help?
User Manual
See the user manual that came with your Philips Digital AV Receiver System.
htr3464_12_qsg_eng2_final812.ind1 1htr3464_12_qsg_eng2_final812.ind1 1 2008-03-19 3:53:23 PM2008-03-19 3:53:23 PM

1Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
FRONT
RIGHT
SUBWOOFER
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
APlace the centre speaker above or close to the TV.
BPlace the subwoofer on the floor, at least one metre
away from the TV.
CPlace the front speakers at equal distances from the
TV.
DPlace the rear speakers at the back or beside the
listening position.
B
Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
C
Connect the radio antenna and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
B
A
AConnect the FM antenna (supplied) to the inner pin
of the FM 75 socket. (For some models, it has
been connected in the factory.) Extend the wire for
optimum reception.
BConnect the power cable from the main unit to the
AC power outlet.
D
Connect the audio from audio/video
devices (TV, DVD Player, Recorder, Cable/
Satellite Receiver or Game Console) (optional)
Option 1: Using the analogue audio sockets
(Connect audio output from TV)
To hear the TV audio through this unit, use a red and
white audio cables (supplied) to connect the AUDIO IN-
AUX sockets on the main unit to the AUDIO OUT
sockets on your TV.
AUDIO
OUT
AUDIOIN
AUDIO
OUT
AUDIO OUT
Note When watching the TV programs, you can
press DI/AUX repeatedly on the remote control until
‘AUX 1’ or ‘AUX 2’ is displayed to get the sound
output from the speakers.
Option 2: Using the analogue audio sockets
(Connect audio output from other device)
Connect a red and white audio cables (supplied) to
connect the AUDIO IN-AUX sockets on the main unit
to the AUDIO OUT sockets on the connected device
(for example, DVD recorder, VCR, Cable/Satellite Box).
AUDIO
OUT
AUDIO OUT
AUDIO
OUT
Note Press DI/AUX repeatedly on the remote
control until ‘AUX 1’ or ‘AUX 2’ is displayed as the
source you want to listen to.
Main Unit (rear)
Main Unit (rear)
FM antenna
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
Main Unit (rear)
Option 3: Using the Coaxial In socket
Connect a coaxial cable (supplied) from the
DIGITAL IN-COAXIAL socket on the main unit to the
COAXIAL OUT sockets on the other device.
Note Start playback on the device. Press DI/AUX
repeatedly on the remote control until ‘COAX IN1’ or
‘COAX IN2’ is displayed as the source you want to listen
to.
Option 4: Using the Optical In socket
Connect an optical cable (not supplied) from the
DIGITAL IN-OPTICAL sockets on the main unit to the
OPTICAL OUT sockets on the other device.
Note Start playback on the device. Press DI/AUX
repeatedly on the remote control until ‘OPTI IN’ is
displayed as the source you want to listen to.
Main Unit (rear)
TV (rear)
DVD recorder/ VCR/
Cable/ Satellite Box
Main Unit (rear)
Audio/ Video device (rear)
Main Unit (rear)
Audio/ Video device (rear)
htr3464_12_qsg_eng2_final812.ind2 2htr3464_12_qsg_eng2_final812.ind2 2 2008-03-19 3:53:25 PM2008-03-19 3:53:25 PM