Philips BTM5120 User manual

www.philips.com/support
User manual
Always there to help you
Register your product and get support at
BTM5120
Question?
Contact
Philips

1
English
EN
Contents
1 Important 2
Safety 2
2 Your micro system 3
Introduction 3
What’s in the box 3
Overview of the main unit 3
Overview of the remote control 4
3 Get started 6
Connect speakers 6
Connect FM antenna 6
Connect power 6
Demonstrate the features 7
Prepare the remote control 7
Set clock 7
Turn on 7
4 Play 8
Play from disc 8
Play from USB 8
Control play 9
Skip to a track 9
Program tracks 9
Play from Bluetooth-enabled devices 9
5 Listen to the radio 11
Tune to a radio station 11
Program radio stations automatically 11
Program radio stations manually 11
Select a preset radio station 11
Display RDS information 11
6 Other features 12
Set the alarm timer 12
Set the sleep timer 12
Listen to an external device 12
7 Product information 14
Specications 14
USB playability information 15
Supported MP3 disc formats 15
Contents

2EN
1 Important
Safety
• Make sure that there is enough free space
around the product for ventilation.
• Only use attachments or accessories
speciedbythemanufacturer.
• Battery usage CAUTION –To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
product:
• Install the batteries correctly, + and - as
marked on the product.
• Do not mix batteries (old and new
or carbon and alkaline, etc.).
• Remove the batteries when the
product is not used for a long time.
• The batteries shall not be
exposed to excessive heat such
assunshine,reorthelike.
• Use only power supplies listed in the user
manual.
• The product shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on the
product(e.g.liquidlledobjects,lighted
candles).
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•Never remove the casing of this device.
•Never lubricate any part of this device.
•Never place this device on other electrical equipment.
•Keep this device away from direct sunlight, naked
amesorheat.
•Never look into the laser beam inside this device.
•Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.

3
English
EN
2 Your micro
system
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfrom
the support that Philips offers, register your
product at www.philips.com/welcome.
Introduction
With this unit, you can:
• enjoy audio from discs, Bluetooth-enabled
devices, USB storage devices, or other
external devices;
• listen to FM radio stations.
You can enrich sound output
with below sound effect:
• Digital Sound Control (DSC)
• DSC 1: Balanced
• DSC 2: Clear
• DSC 3: Powerful
• DSC 4:Warm
• DSC 5: Bright
The unit supports these media formats:
What’s in the box
Check and identify the contents
of your package:
• Main unit
• 2 x speakers
• Power cord
• 3.5mm audio cable
• FM antenna
• Remote control (with one AAA battery)
• Printed materials
Overview of the main unit
a
• Turn on the product.
• Switch to standby mode or
Eco power standby mode.
b Display panel
• Show the current status.
c
• Connect USB storage devices.
• Charge your portable device.
d AUDIO IN
• Connect an external audio device.
e Disc compartment
f
• Open or close the disc compartment.
b
c
d
e
f
h
g
a

4EN
g SRC
• Select a source: DISC, USB,TUNER,
AUDIO IN,AUX, BT (Bluetooth).
• Start, pause, or resume play.
• In BT mode, press and hold for more
than 3 seconds to enter pairing mode.
• Stop play or erase a program.
• In standby mode, turn on/
off feature demonstration.
/
• Skip to previous/next track.
• Search within a track from the
disc, USB or BT mode.
• Tune to a radio station.
• Press and hold to tune to the
next available radio station.
h VOLUME
• Adjust volume.
• Adjust time.
Overview of the remote
control
a
• Turn on the unit, or switch to Standby
mode, or switch to Eco Power mode.
b
• Open or close the disc compartment.
c USB/
• Select the USB or Bluetooth source.
d CD/FM
• Select the disc source.
• Select the FM radio source.
d
e
c
b
f
g
h
i
j
k
a
l
m
n
o
p
q
r

5
English
EN
e OK
• Conrmselection.
• Switch between STEREO and
MONO in tuner source.
f /
• Skip to the previous/next track.
• Press and hold to search within a track
from the disc, USB or BT source.
• Tune to a radio station.
• Press and hold to tune to the
next available radio station.
g PRESET/ALBUM /
• Skip to the previous/next album.
• Select a preset radio station.
• Adjust time.
h VOL -/+
• Adjust volume.
• Adjust time.
i MUTE
• Mute or restore volume.
j SOUND
• Select a preset sound setting.
k CLOCK
• Set clock in standby mode.
• Display the current time in any source.
l SLEEP/TIMER
• Set the sleep timer.
• Set the alarm timer.
m REPEAT/SHUFFLE
• Select the repeat play mode.
• Select the random play mode.
n PROG
• Program tracks in disc/USB source.
• Program radio stations manually.
• Press and hold to start automatic
scan of all available radio stations.
o RDS/DISPLAY
• Select RDS broadcast information.
• Synchronize clock with RDS station.
• Select display information during play.
• Adjust display brightness
in standby mode.
p
• Start or pause play.
• In BT mode, press and hold for more
than 3 seconds to enter pairing mode.
q
• Stop play or erase a program.
r AUX/AUDIO IN
• Select the AUX or AUDIO IN source.

6EN
3 Get started
Caution
•Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in
this chapter in sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
•For optimal sound, use the supplied speakers only.
•Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specicationssectionofthismanual.
Connect FM antenna
Tip
•For optimal reception, fully extend and adjust the
position of the antenna.
•For better FM stereo reception, connect an outdoor
FM antenna to the FM AERIAL socket.
Connect power
Caution
•Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•Before you connect the AC power cord, ensure that
you have completed all other connections.

7
English
EN
Demonstrate the features
• In standby mode, press and hold on the
front panel for more than 15 seconds to
demonstrate features of this device.
» The features are displayed one by one
across the display panel.
• To turn off the demonstration, press
on the front panel again.
Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
•Risk of decreased battery life! Never mix different
brands or types of batteries.
•Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Set clock
1 In standby mode, press and hold CLOCK
on the remote control for more than two
seconds.
» [CLOCK 24] or [CLOCK 12] hour
format is displayed.
2 Press PRESET/ALBUM / to select the
12 or 24 hour format.
3 press CLOCKtoconrm.
» The hour digits are displayed and begin
to blink.
4 Repeat steps 2-3 to set the hour and
minute.
Note
•If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•You can view clock information in power-on mode by
pressing CLOCK.
Turn on
• Press .
» The device switches to the last
selected source.
Switch to standby mode
• Press again to switch the device to
standby mode.
» The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
• Press and hold for more than two
seconds.
» The display panel is dimmed.
Note
•The device switches to Eco Power Standby mode after
15 minutes in standby mode.
•In Eco Power Standby mode, when you connect a
mobile device to the USB socket, the device switches
to charging mode.
Switch between standby mode
and ECO standby mode:
• Press and hold for more than two
seconds.

8EN
4 Play
Play from disc
1 Press CD/FM to select the CD source.
2 Press to open the disc compartment.
3 Insert a disc with the printed side facing
upward.
4 Press to close the disc compartment.
» Play starts automatically. If not, press
.
Play from USB
Note
•Make sure that the USB device contains playable audio
content.
1 Press USB/ repeatedly to select the USB
source.
CD
DISC
2 Insert a USB device into the socket.
» Play starts automatically. If not, press
.
Charge your device
You can charge your device through
the USB socket on this product with
a USB cable (not supplied).
Note
•The maximum current for USB charging is 1 A.
•Not all devices for USB charging are guaranteed.
USB