Philips FWD154/98 User manual

Quick start guide
FWD154/98
Connect
Setup
Enjoy
EN
DVD Mini Hi-Fi System
1
2
3

What’s in the box
1
2
Quick start guide
XXXXXX
Connect
Setup
2Enjoy
Eng
XXXXXXX
XXXXXX
Remote control Quick start guide User manual
Connect
1
Install remote control batteries
1Open the battery compartment.
2Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3Close the battery compartment.
A
Composite
video cable
(yellow)
Connect speakers
BDNote
•Ensure that the colors of the speaker
wires and terminals are matched.
1Hold down the socket flap.
2Insert the stripped part of the wire
completely.
Insert the right speaker wires to “•R”, left
speaker wires to “L”.
Insert the blue wires to “•+”, black wires to “-”.
3Release the socket flap.
MP3 link cable
FM ANT LOOP ANT
Speaker
(Right)
Speaker
(Left)
3
1
2

Connect
1
Connect power
D
VIDEO
AUDIO OUT
RL
Connect TV
C
ETip
•See the User Manual for how to connect
other devices to this system.
1Connect the supplied composite video
cable to:
• the VIDEO socket on this unit.
• the video input socket on the TV.
CCaution
•Risk of product damage! Ensure that the
power supply voltage corresponds to
the voltage printed on the back or the
underside of the unit.
•Risk of electric shock! When you unplug
the AC power cord, always pull the plug
from the socket. Never pull the cord.
• Before connecting the AC power cord,
ensure you have completed all other
connections.
1Switch the voltage selector to the local
power line voltage.
2Connect the AC power cord to the wall
socket.
VIDEO
AUDIO OUT
RL
110-
127V
220-
240V
VIDEO
AUDIO OUT
RL
TV
VIDEO

Play disc
A
1Press DISC to select the disc source.
2Press OPEN/CLOSE to open the disc
compartment.
3Insert a disc with the printed side facing
up, then close the disc compartment.
Play starts automatically.
»
To pause/resume play, press•.
To stop play, press•9.
Enjoy
3
Setup
2
Set the clock
A
1In standby mode, press and hold OSD/
DISPLAY on the remote control.
The hour digits are displayed and begin to
»
blink.
2Press VOL +/- on the remote control to
set the hours.
3Press OSD/DISPLAY.
The minute digits are displayed and begin to
»
blink.
4Press VOL +/- to set the minutes.
5Press OSD/DISPLAY to confirm the time.
Play from USB
B
1Insert the USB plug of a USB device into
the USB socket.
2Press USB to select the USB source.
Play starts automatically.
»
To pause/resume play, press•.
To stop play, press•9.

Enjoy
3
Program and tune to radio
stations
C
1In tuner mode, press and hold PROG for
2 seconds to activate automatic program
mode.
»[AUTO] (auto) is displayed and begins to
blink.
All available stations are programmed in the
»
order of waveband reception strength.
The first programmed radio station is
»
broadcast automatically.
2In tuner mode, press J/Kto select a
preset number.
ETip
• Detailed features and additional functions are
described in the user manual.
© Royal Philips Electronics N.V. 2009
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China PDCC-2009
ETip
•For optimal FM reception, fully extend and adjust
the position of the FM antenna.
•For optimal MW reception, adjust the position of
the main unit.